by www.consumertronics.net |
wizguru* ...tell your friends! policies.htm |
|
USA
site - No cookies - No spyware - No adware - No trojans - No viruses -
No worms - No spam - No pop-ups We Respect Your Privacy - We do NOT Monitor Your Shopping nor Track You Online, nor Share Your Data -------------------------- *Please do NOT Phone Us. Email Us Instead. We are Inundated by Scam Phone Calls with Fake Caller ID #s. Put "Inquiry" in Subject Line |
ABQ Techzonics Organization Earthshaking Online Tech Superstore
We Seriously Consider all Reasonable Best
Offers, Price Negotiations, Trade Offers!
We are Your Perfect One-Stop-Shopping Superstore to Fill Your High-Tech Parts
Lists!
FREE ICS, FREE TRANSISTORS,
FREE RECTIFIERS (FREE DIODES)
FREE INDUCTORS (FREE COILS), FREE CAPACITORS, FREE RESISTORS
or 10% CASH DISCOUNT - Stock Up Now! - Your Choice - No Additional S/H
For ALL Single, Combined, Multiple Orders (over
30 day period) over $100 total, upto 20% of Your Order
Applies to all electronic parts listed on all of our webpages up to the total
quantity we are selling
(For Free Electronic Parts, listed prices apply to your 20%,
and parts must be in the quantity increments we list them in)
(Limited Time Offer, we may change or discontinue this Special Offer without
prior notice or liability)
INDUCTOR COILS, SMALL ELECTRICAL
TRANSFORMERS,
SMALL SPEAKERS, SOUNDERS, ANTENNAS, TRANSDUCERS, SENSORS:
THESE PASSIVE ELECTRONIC PARTS (MAGNETICS): Inductors (RF Coils, Chokes, RF Baluns, Solenoids, Air Core Inductors, Iron Inductors, Toroids (Torroids), Hybrid Coils, Radial Inductors, Axial Inductors, Small Inductors, Surface-Mount Inductors, Coil Forms), Ferrites (Ferrite Inductors, Ferrite Beads, Ferrite Cores, Ferrite Forms); Small Electrical Transformers (Standard Transformers, Audio Transformers, Speaker Transformers, Signal Transformers, Pulse Transformers, RF Transformers, Switching Transformers, Current Transformers, Isolation Transformers, Current Transformers, Autotransformers, Tesla Coils, Impedance Matching Transformers, Isolation Transformers, Switch Mode Transformers, Step-Up Transformers, Step-Down Transformers, Variable Autotransformers, Variable Transformers, Ferrite Transformers, Laminated Transformers, Toroidal Transformers, Small Transformers, Surface-Mount Transformers, Transformer Forms); Small Speakers, Sounders, Antennas, Sensors, Transducers (for Thermistors, Varistors, MOVs, Transient Suppressors, Lightning Arrestors, other special Power Devices, see our Power page => POWER ICs (Voltage Regulators, etc.)
YOUR ONLINE ONE-STOP SHOPPING TECH SUPERSTORE!
Links to all Offer Webpages => SITEMAP <= => ABQ TECHZONICS <= Homepage
Consumertronics.net,
P. O. Box 23097, Albuquerque, NM 87192
Contact: wizguru@consumertronics.net
Voice: 505-321-1034 (9-5 MST, M-F)
Please EMAIL US for all Orders, Inquiries and Questions
Copyright © 2008-2024, Consumertronics. All rights reserved
TABLE OF CONTENTS:
Inductors, Coils, Antennas,
Ferrite Cores, Ferrite Beads
SMALL TRANSFORMERS: Signal
Transformers, Pulse Transformers, RF Transformers, Switching Transformers, Isolation
Transformers, Small Power Transformers, Current Transformers, Variable Transformers,
Autotransformers
Small Speakers, LC-Filters,
Sounders, Sensors, Transducers
ITEM SEARCHES, EQUIVALENT ELECTRONIC PARTS: Please use top-right search box (or your Browser Search / Find feature) to locate the specific Items of interest or just browse webpage. We listed many electronic parts by more than one name and name variation (e.g. "10mH", "10 mH"). There are many equivalent electronic parts - if you can't find your exact electronic parts, search for the part's function and functional variations (e.g. "inductor", "coil"), and by core electronic part # or descriptor (e.g. Enter "mH" to find every inductor and transformer listed herein with inductances in millihenrys). Top-right search box finds parts even if you only have small snippet of name or part #. If you still can't find your electronic parts, try by other name and part # variations. If you still can't find electronic parts then search our other likely webpages, see SITEMAP for links. Your efforts might save you money as some electronic parts / electrical parts are now either unavailable or rare and costly - if you can find more common electronic part equivalents and/or buy in quantity, savings of 90+% per part are possible.
ITEM SPECIFICATIONS - DATASHEETS & CIRCUIT DESIGNS: For datasheets for integrated circuits, transistors, rectifiers, diodes, and most other electronic parts, we recommend the following great electronic parts database websites: Alldatasheet.com, Datasheet Archive, and DatasheetCatalog.com. Electronic design tutorials, electronic applications, specific circuit designs and even patent data can be found using Google, Yahoo, MSN, etc., as well as many books filled with electronic parts datasheets and circuit designs. While we have tried to be 100% accurate in our descriptions, please freely let us know any errors or omissions made herein, preferably by providing us a pdf URL for the specific Item either from the manufacturer or from an Online datasheet database, such as, Alldatasheet.com, Datasheet Archive, Datasheet Catalog.com.
ITEM CONDITIONS: Unless otherwise indicated, all items described on this webpage are new old stock (NOS) and never used. We often buy and trade for new electronic parts, electronic test equipment, and other items of the types described herein, preferably in larger quantities, some which we set aside for our own electronic laboratory, shop and other inventories and some we resell herein. Should you have items to sell or trade of these types, please let us know via email. All small parts and materials we acquire for resale herein must be new, but we often buy and trade for used large parts, tools, equipment and books in very good conditions, which we describe as "used" for those we resell. Please email us (please don't call as we are often in our labs), use email Subject: "Buy/Sell/Trade Inquiry."
DESCRIPTIONS & IMAGES: Unlike many Online stores, our goal is to always provide you clear and correct item images, and accurate and reasonably complete item descriptions. While we have tried to be 100% accurate in our descriptions and images, please freely let us know of any errors or omissions made herein, for example, by emailing us URLs to relevant datasheets. While images usually help, most of the items we sell are already well known. If any of our descriptions or images are missing, incomplete or inaccurate and this affects your purchase decision, please email us (please don't phone; put "Need Better Info for Item" in email Subject Line) so we can make reasonable corrections. Many of our images of electrical and electronic hardware do not show all of the leads or cabling which the actual items have so that we can provide bigger and clearer images of the body of the items to better show part numbers, labeling, features and cosmetic conditions.
POLICIES: Unless explicitly stated otherwise on this webpage, all applicable Techzonics organization policies are found at: www.consumertronics.net/policies.htm.
PAYMENTS: We
accept checks, money orders, PayPal (PP), Money Transfer Service (MTS) payment, trade and cash. Simply email us (wizguru)
a list of what you want (Title, name or part # of each choice), include the
prices with S/H, and your name, shipping address and preferred payment method,
or use one of our Consumertronics Online Order Forms. We ship within
2 work days after full payment clearance period from day of deposit. All payments
must be made in $US. Details below:
(1) FASTEST SHIPPING: U.S. Postal Money Order
(PMO), Canadian PMO (made out in $US), PP, MTS and cash are considered to
be same-as-cash by us - clearance period is zero days. Note: We are not
responsible for cash sent in the mails, so conceal well.
(2) MOs & CHECKS DETAILS: Pay to: "Consumertronics".
ALL NON-PMO MOs & CHECKS : Clearance period: 10+ days if $20-$100,
20+ days if $101-$250, 30+ days if over $250.
(3) MONEY TRANFER SERVICES (MTS) DETAILS: Pay to: "John Williams" (due to fact that using MTS to pay to a business
name is usually a major hassle). All MTS payments over $500 require prior written
approval by us. While almost all MTS arrive here within an hour, a few may take 1-3 days.
(4) PAYPAL (PP) DETAILS: Before paying us by PP, email us with your order details and for our prior approval. Should we verify that your amount is correct and approve PP for you, go to PP. Do a PP "Send Money" to:
"wizguru@consumertronics.net". PP over $50 require prior, explicit,
written approval by us via email, and PP payers must be Verified PP users, which
transaction PP must provide Seller Protection. For both verifiable and repeat
Buyers, ABQ Techzonics may greatly increase the PP limit, in which case,
it emails to Buyer his/her new PP level.
(5) ITEMS FOR TRADE DETAILS: Who doesn't want
to save cash these days! We do accept Items of Trade. By doing Items For Trade,
you save money and get rid of good Item(s) you need less than Items we offer.
Prior explicit permission from us is required before you ship to us any Item
for trade. If interested, email us (wizguru,
put in email Subject Line: "Item for Trade Inquiry.") with full details
of what you have to offer and what you want for it (you must have sole and exclusive
ownership of all Items you offer to us for trade). Include complete description
of all Item(s), including Item make and model/part numbers, conditions, quantities,
defects. Please do NOT phone us about Items of trade. If interested we will
email you back with conditional acceptance or a counteroffer. If mutual acceptance
results, we will then email you our permission to ship the Items, which you
do at your S/H expense. Once your trade Items arrive here, we will examine them,
which usually takes 3-20 days. If acceptable to us, we will ship (at our S/H
expense within 2 work days) what we had agree to trade to you. Note: We do not
want old TVs,VCRs, home systems, computers, monitors or peripherals or big,
heavy items, and all items must be clean and safe to ship and handle. Again,
don't ship us anything until you receive our written explicit approval to do
so.
(6) PAY EXACT FULL AMOUNT: Please pay the exact
full amount of your purchase + S/H (email us if you are not sure). If you overpay
us by more than 5% or $100 (whichever is less), allow 90-120 days for us to
refund you the difference.
(7) UNACCEPTABLE PAYMENT TYPES: No credit cards, debit cards,
CODs, partial payments, postdated payments, "on approvals", direct bank transfers, gift cards, foreign currency, bitcoins (or any other form of virtual money), or any other types of payments or shipment not explicitly OKed herein or by us in writing
prior to payment. Furthermore, we reserve the right to refuse any order, form
of payment, or buyer-imposed sale or shipping conditions without liability to
us. For our good buyers: We are more flexible in types of payments and shipping
conditions. FOREIGN BUYERS: Some items may be restricted by government
regulations for export, and Buyers assume all liability for the legality of
our shipments to them and their purchases, possessions and uses of the items
we ship to them.
NOTE: Prior to Paying for Your Order, be sure to first check and verify by email our stated availabilities, costs, and S/H. Due to a recently past staff shortage over last few years, we are trying to catch up. Availabilities: About 95% of Items listed as available are still available. Prices: About 50% of Items have changed prices, both up and down, depends on the Item. S/H: Increase all stated S/Hs by 25% (blame the shippers). Taxes: New Mexico and some other States, Counties and Cities (but not all) now levy an Online sales tax, which if due, we must collect (blame the politicians). Also, do not pay by PayPal without our prior, explicit and written OK (due to hacking attempts on our PP account; if we need to refund a PP payment for any reason, we charge the Buyer a 10% fee).
PRICING: We are flexible in our prices and S/H - especially for our good customers and for quantity and multi-item orders - we want to be fair to both you and us. Prices are stated below Item Description. We determined Item price based on prices of similar items found Online and in stores. In cases of no clear Online or store price consensus, other sources were used. If our price is too high for any item we sell, we will seriously consider reducing our price - especially if you document that others are selling this same or equivalent item at lower prices in the quantity you need - our goal is to beat our competitors! For many items, we are not limited to the quantities shown - should you need more and we have what you need available, we will seriously consider your offer. By buying an item in quantity and/or more than one item, you much reduce your S/H costs per unit. In most cases we can also do less quantity if your total order is $10+ (+S/H) and average price of your items is $5+ each. Just email us with your needs, your counter-offers, and/or items you want to trade.
SPECIAL DISCOUNTS: Until ___________, 20___, you may take _______% off of the price of any and all Items described on this webpage in which the word "Firm" does not appear next to the price.
SPECIAL QUANTITY DEALS SAVES YOU MONEY: Larger quantity (and multiple Item and local pickup and delivery) sales almost always result in per-unit $Item-plus-S/H savings for YOU! We have some Items in much larger quantities than offered above as usually stated in Item description. Yes, if we have the quantity to meet your higher quantity needs, we will seriously consider any reasonable and mutually fair offer you propose which will not only get you the quantity you need but at a substantial savings to you in per unit price and per unit S/H costs (quantity evenly divisible by 10 or 25). We will seriously consider underselling all other major sellers of the same items.
SHIPPING & HANDLING & COMBINED CHARGES: Where S/H is stated, it is stated for CONTINENTAL USA ORDERS. Shipping part of S/H is based on actual Shipping charges. For multiple Items shipped to you in the same package, we will COMBINE S/H CHARGES to save YOU money! So buy all of the Items you need from us now. Where S/H is not stated, the following S/H charges apply (NOTE: All purchases over $1,000, while prepaid, are available for pickup only, proper ID is required, and receiver must sign a receipt for all Items):
CONTINENTAL USA ORDERS: $7.90.
NON-CONTINENTAL USA ORDERS: $12.90.
FOREIGN ORDERS: Please inquire. Minimum foreign Air Mail S/H is $14.90 Canada, and $22.90 all other foreign addresses, so please order as much as you can to save substantial foreign S/H.
MULTIPLE ITEMS SAVE YOU MUCH S/H CHARGES!: We are your perfect one-stop-shopping Super Store for high-tech parts to fill your parts lists! S/H is now expensive and shippers are constantly increasing their rates; to save YOU much in S/H, please order all that you need from us today from this webpage and all of our other webpages, pay for them all in full in one payment to be shipped all together to same address. ALL USA & CANADA ORDERS: You pay full S/H for your most S/H-costly Item plus half S/H for each and every other Item you buy. ALL OTHER FOREIGN ORDERS: Please inquire.
SHIPPING METHOD: For USA, we usually use Priority Mail or Media Mail (if book or manual) if Shipping charge is less than 75% of the S/H stated above. All foreign Shipping is by Air Mail. Other forms of USA shipping, including UPS, FedEx, Overnight, Second Day Air, Insured, etc. are usually OK but the S/H will be higher. We will not charge shipping to Buyer's shipper account.
ANTISTATIC PACKAGING: All Items which are electrostatically sensitive (e.g. CMOS, FET, MOSFET or otherwise known to be static electricity sensitive) are shipped in antistatic tubes, antistatic foam, antistatic reel tape, antistatic tray, and/or antistatic bag.
LOCAL PICKUP / DELIVERY OPTIONS: To possibly save YOU much S/H money, see: Local Pick-Up-and-Delivery Options.
Thanks for visiting our ABQ Techzonics website. Best of successes. John Williams, M.S.E.E., Consumertronics.net
Inductors, Coils, Antennas, Ferrite Cores, Ferrite Beads:
(15) 5mH INDUCTORS, 11ohm SHIELDED
"BRAINWAVE" INDUCTORS / "BRAINWAVE" COILS
New old stock (NOS) 5 mH inductors, shielded. These shielded inductors are square and about 5/16" on a side and 3/8" tall (excluding pins). Coil is center-tapped (3-pins). Inductance is tunable from about 3mH to about 7.5mH (nominally set at about 5mH). These 5mH inductors are very useful in a variety of designs, including signal, RF, pulse generation, pick-up coil, transmitting coil, etc. We mostly use them to design some brainwave detection devices as they are sensitive to brainwaves.
Several things make these inductor coils ideal for brainwave and mind control research and applications: (1) Relatively high inductance for small physical size. (2) Small physical size for greater pinpointing of signals. (3) Outer shielding which not only minimizes the pick-up of stray electromagnetic fields, such as from power lines and transformers, but also provides physical strength to the inductor body. (4) Center-tapping for either tapping off two sets of signals isolated from each other, or for inserting a signal or DC voltage on one leg while inserting or extracting the resultant brainwave signal from the other leg.
Top of image shows top of inductor with ferrite cap intact, as well as with ferrite cap completely unscrewed and removed, and the thin top part of the inductor's aluminum case filed off so the coil is maximally exposed without removal from its shield protection, making it ideal as a partially-shielded pickup coil and/or transmitting coil. The bottom part of this image shows the inductor on its side as well as the removed ferrite cap on its side.
BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $14.95.
The SUPER CONDUCTOR DETECTOR
New! This exciting and incredible
device detects virtually all nearby conductive materials without touching them
- including as a metal detector for platinum, gold, silver, copper, aluminum
- even carbon and some conductive composite materials - without
touching the conductor - even through insulators like cloth / clothes,
plastic, paper, wood and ceramic - even through flesh - even if hermetically
sealed in an insulator! Especially designed for detecting and differentiating
smaller conductive objects, such as coins, jewelry, watches, keys, metal hardware,
and electronic implants (with conductive shells or innards).
Highly directional to pinpoint conductive objects. For those truly interested
in gizmos with astounding and seemingly supernatural capabilities, you absolutely
MUST buy the SuperConductor Detector!
We are currently
working on our Portable Gold Magnet based on this technology - a real gold magnet
which actually attracts gold (not gold-colored magnets, or magnets
used in gold panning to remove black sands, but a real gold magnet!).
Stay tuned - we are making good progress and may have our Portable Gold Magnet
soon. If and when we complete it, we will first offer it for sale to our good
customers.
NOTE: This device-type
was handmade and hand-tooled in limited quantity using several different box
types and circuitry, but all have the same functions and features as described
above. Therefore, the device you receive may differ in appearance from the one
in the image above. Lid to device box may be shown temporarily opened or removed
for better view of internal circuitry. Please allow 3 weeks for delivery.
LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.
BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $1595, S/H: $15.90
(6) "RUBBER DUCKY" ANTENNAS / SCANNER
ANTENNAS
VHF/UHF or SIMILAR RF ANTENNAS
New old stock (NOS) rubber ducky whip antennas, VHF/UHF (or similar) RF Antennas. 7-1/2" long. Base connector is a TNC male connector (a mechanical connector 1/2" diameter and is threaded inside; inside the base connector is a smaller BNC-size electrical connector for the antenna function itself). TNC-to-BNC adapters are commonly available on eBay (as low as about $1 each), and other electronics retailers. A BNC jack with the "ears" ground off connects up snugly with the antenna's electrical connector, and permits quick connect / quick disconnect operations. This radio antenna / scanner antenna is very high quality.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $19.95.
SUPER THIN FLAT COIL
SLIPS BETWEEN SLOTS, SLITS, JOINTS, CRACKS,
CLOSELY-SPACED PC CARD STACKS, OTHER THIN SPACES
New old stock (NOS). Very versatile and rare type of induction coil / antenna coil about as wide and thick as a credit card, and about 400µH inductance. Especially nice for stealthly slipping inside of electronic equipment through slots, slits, joints and cracks, and between closely packed card stacks to pickup and detect important signals and/or to inject certain signals into the equipment, such as control signals.
If you've ever tried to make a coil like this, you will appreciate just how very difficult they are to make. Even some advanced electronic shops have problems trying to make them. We currently have about 100 of these very rare handmade coils available for possible sales; this sale is for one of them; and prices will likely increase as my supply diminishes.
This truly remarkable inductor coil can be used as a receiving coil / pickup coil / near-field coil / transmitting coil, continuous wave or pulsed operation. Two can be used together as a very flat transformer, or as some type of a detection / analysis / testing setup (e.g. the object to be detected, analyzed, tested or processed is placed or occurs between the coils), as a "through-wall" set of communications coils (e.g. transmitting coil is laid flat on wall or other separator and receiving coil is laid flat on other side of wall / other separator opposite to the transmitting coil). Another major application is using two as miniature Helmholtz coils (Helmholtz coil pairs are commonly used with electromagnetic therapy equipment and with mind control devices). Another is as directional antenna coils for Technical Security CounterMeasure (TSCM) near-field probes (especially the magnetic component). Other popular applications include other directional antenna uses, small metal detector coils, coils for detecting / measuring / programming brainwaves (i.e. brainwaves coil for various brain research, biofeedback, and mind control uses), as a general biological signals pick-up coil, as a near-field magnetometer coil, and/or science fair projects. Because the coil is flat, it can be conformed around cylindrical, spherical, wavy and uneven objects and surfaces. Great for snooping around electronic equipment in situ, especially when small and tight spaces make snaking in any other types of coils impossible, so this coil's circuit electronic troubleshooting, and security and research applications are truly outstanding.
These spiral coils also have crafts, jewelry and decorative applications. Some folks believe that spiral antennas transmit and/or receive mystical, spiritual, healing, psychic and/or alien/galactic signals. In fact, wall art from several ancient civilizations appear to depict flat spiral antennas. They are certainly fascinating to study and experiment with.
Because these special coils are all handmade, there are minor variations between them.
LIMITED QUANTITY. We only have a handful of these left.
BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $29.95.
GEMINI CORDLESS PHONE ANTENNAS / WIRELESS ANTENNAS,
RUBBER DUCKY ANTENNAS for AT&T PHONES, more
New old stock (NOS). Gemini Cordless Phone Antennas / Cordless Telephone Antennas / Rubber Ducky Antennas / Wireless Antennas. Very high quality microwave antennas. Originally designed for AT&T cordless phones, but have many other uses. The grey Gemini antennas (TA253) are compatible with almost all AT&T cordless telephones. These wireless antennas can be adapted to many other wireless devices, especially the grey Gemini antennas (TA253) because they have a mounting screw that is standard for many cordless antennas / wireless antennas.
LIMITED QUANTITY. We have only a few of each of these left.
BUYER: Order by Title (below image) - Email us your order. - List History: LD138. - Price: $6.95 white one each, $9.95 grey one each.
6' MAGNETIC TRANSDUCER / MAGNETIC PROBE /
MAGNETIC ELECTRODE / MAGNETIC FIELD PROBE /
BRAINWAVE ELECTRODE / BRAIN PROBE, 12mH, 25 Ohm
New old stock (NOS). These magnetic transducers / magnetic probes / magnetic electrodes / magnetic field probes / brainwave electrodes / brain probes can be used for both detecting/receiving and transmitting magnetic fields and as a small electromagnets, depending upon the piece of equipment it is connected to (under 250ma current). Originally bought for brainwave research, these magnetic transducers can be used for many applications, including but not limited to, brainwave detection, other psychic and paranormal research, other medical/biomedical research, small magnetic field detection, small metal detection, bug detection/tap detection (as well as bugging and tapping), some implant detection, isolated communications, material flaw detection, magnetic therapies, magnetic stimulations, magnetic key decoding, to measure relative motion of conductive objects (especially iron or steel, e.g. tachometer), etc. These magnetic probes are also ideal for many magnetometer and field-strength meter devices and uses.
Cable length is 6-foot and is of a very high quality and pliable coaxial cable (coaxial cabling is required to absolutely minimize electrical noise pick-up). These magnetic transducers are about 1/4" diameter and about 1/2" long - an incredible 12 mH inductance, 25 ohm, for their small size. On the other end is connected a mini-phone plug (we also have a few each with RCA plug, sub-mini phone plug and spade lugs, so if you need one of these, let us know). These magnetic transducers will both receive and transmit magnetic energy from about 0.2 Hz to about 300 KHz pulse, modulated and sinewave signals - covering the entire audio frequency bandwidth (BW), as well as most of the infrasonic BW and air ultrasonic BW.
When used in conjunction with a commercially-available audio amplifier or recorder, these magnetic transducers should be wired in as a dynamic microphone. Both infrasonic amplifiers and ultrasonic amplifiers are also available from us.
For use with living tissues (plant or animal), penetration or even direct contact to surface is not required, however, contact should be as close to surface as possible as air gaps diminish effectiveness. This means that these magnetic probes are non-invasive, and one does not have to use a gel, shave the area, touch the skin or other surface, or suffer electrode irritation (common to skin contact and invasive electrodes) to effectively use it. And that these magnetic probes can be effectively used over most light clothing and plastic wrap. As with all magnetic transducers, especially those used for sensitive or precision magnetic detection jobs, the magnetic transducer should be held as steadily as possible. This can be done using a steady hand, rubber bands, velcro or shower cap with a hole in it to pass the cable or tape (none of these are provided). For permanent use and non-living area contact, you might also consider using a cement, glue or other firm adhesive to attach the transducer rock-solid to the surface.
This is just one electronic device in a group of closely related Items you may be interested in: (1) Ultrasound Amplifier, (2) Infrasound Amplifier, (3) Magnetic Transducer - this Item, (4) Ultrasonic Microphone, and (4) Soft-Pinch Electrodes. Email us if interested in ultrasonic, audio or infrasonic devices.
Note that these magnetic transducers are all unique handmade creations so while we have limited quantity, the one you get may not be the exact one shown in the image as there are minor variations in appearance (heat shrink tubing is used to reinforce both the magnetic transducer and connector ends so that even with much handling, this magnetic transducer should last a very long time).
After many hours of using magnetic transducers of this same type (the magnetic transducer you will receive is new and never used), including some outdoors uses, we have found them to be very useful, reliable and versatile, and have not broken one yet. This magnetic transducer does not have a built-in amplifier (not an "active electrode"), but the signals it picks up can be viewed on a quality oscilloscope.
This special magnetic transducer is not intended for any medical uses. We are not licensed medical professionals. We make no medical or paranormal (including but not limited to psychic powers) claims. This magnetic transducer can also be used for many electronic laboratory, shop, automotive and hobby / craft uses.
This magnetic transducer does not come with a User Manual, nor with any other form of documentation, nor with any tutorial, instructions or guide on its many possible applications and uses, nor with free consulting services. And it does not come with an amplifier, oscilloscope, additional cabling or any other hardware.
Our extensive biomedical research over the last decades was/is into Mind Control, Subliminal Mind Control, Electronic Attack (including electromagnetic attack, ultrasonic attack and infrasonic attack), Electronic Harassment, Brainwave Entrainment (or Brain Entrainment), Brainwashing, Mind Reading, Mind Probing, Brainwave Signature, Brain "Fingerprinting", Body Control, Behavioral Modification, Electronic Implants, Directed Energy Weapons Technologies, Voice-to-Skull, RFID Tracking, Electronic Gang Stalking, Radionics/Psychotronics/Psionics, Biofeedback, Plant Stimulation / Plant Monitoring, and Fortean Phenomena and other Unexplained Phenomena for Consumertronics.net of Albuquerque, NM (high-tech books, manuals, research, consulting), and for Lone Star Consulting, Inc. of El Paso, TX (huge number of related device types, unique customized devices consulting, etc., some device-types may be described on the Lone Star Consulting, Inc. website and with its comprehensive FREE MIND CONTROL TUTORIAL). Our related Consumertronics.net books and manuals (including ebooks) include, "Mind Control," "Subliminal Mind Control," "Electromagnetic Brainblaster," and "Under Attack!", and are also offered Consumertronics.net website. We have such a huge amount of test equipment related to this type of research, much of it duplicate or similar to each other, some we are now selling as biofeedback / mind control equipment, if interested, please email us for details.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD093. - Price: $34.95.
(20) 3.9mH / 3.9 mH COIL INDUCTORS 8mm Dia., 10mm High, ±10%, 200mA, 8.5 Ohms
New old stock (NOS). 3.9mH coils / inductors. About 1/4" diameter, 3/8" long, 10 ohms. We find these 3.9mH inductors (nominal 4mh inductors) are especially ideal for monitoring brainwaves for brain research and mind control and electronic harassment research. They are ideal for power supply filters, and low-band filters. Because these 3.9 mH inductors are indented in the middle, they are easy to convert into custom-made transformers by wrapping additional windings using magnet wire. 3.9mH inductors shipped on reel strip.
Because these inductors are small, they are especially great for pinpointing localized and small magnetic field sources, which is often critical for brainwave research, surveillance, and where small magnetic field sources are near or inside larger magnetic fields, such as ambient magnetic fields. Because they are of relatively high inductance value, they are also especially great for detecting and pinpointing low frequency signals in the 1 Hz to 100 Hz band, which includes both brainwaves and AC power systems (60Hz and 50Hz). If you encapsulate the inductor with supporting pre-amp circuitry, this inductor makes a great power pick-up coil, signal receiver coil or signal transmitter coil for small electronic implants, RF receivers and RF transmitters. Versatile inductors - great for many uses!
MANY RECEIVING & TRANSMITTING USES: These inductor coils can be used in both receiving and transmitting
applications for frequencies (freqs) from a few Hz to upto about
2,000 Hz. To use these
inductors to receive magnetic signals (e.g. for brainwaves,
high-voltage line magnetic fields, hidden surveillance devices, audio bandwidth magnetic
signals, etc.), you need an appropriate amplifier (amp) which has either
a magnetic input or dynamic mike input. Then you connect wires and
end connectors to these inductors which are compatible with your amp.
These inductors have external leads for
soldering up your wires. Amp bandwidth is critical. Many quality audio amps amplify down to about 15 Hz - 25 Hz. Some brainwave and magnetic
field signals are of lesser freqs, and thus may not be amplified well by an
audio amp, in which case, you use a very low freq magnetic
amp. Magnetic amps do not supply current to the inductor's line. The
fluctuations of the external magnetic field induces into the inductor
an electrical current and thus into the input line to the amp, which current
in the amp is typically converted into a voltage that is amplified by the amp. For transmitting uses, you need an output amplifier stage which will drive a small magnetic load. These inductors can of course be wired in series (e.g. for greater resultant inductance and output voltages) or parallel (e.g. for input signal mixing and greater transmitted magnetic field).
Note, that these are INDUCTORS - not mikes - so they do not pick-up
sound directly - only fluctuating magnetic fields. Also note
that this sale is for inductors only, and does NOT include cables,
connectors, amplifiers, or anything else.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD137. - Price: $7.95
(20) MINI 8.2MH INDUCTORS / 8.2 MH COILS
72 OHM, 50MA, NIS00410
New old stock (NOS) SMT/SMD. Very small 8.2mH inductor
coils (nominal 8 mH inductors), 72 ohm, 50ma, part # NIS00410. When iron is
brought near these 8.2 mH inductors front, inductance increases by about 10%.
This means that these 8.2 mH coils are great as pickup coils, for example, to
pickup brainwaves and other magnetic fields - great for biofeedback, mind control
and electronic attack research. These coils are very small - 3/16" diameter,
1/8" tall - in fact, tiny compared to their relatively very high inductances.
And because these inductors are tiny, they are especially great for pinpointing
localized and small magnetic field sources, which is often critical for brain
research, surveillance, and where small magnetic field sources are near or inside
larger magnetic fields, such as ambient magnetic fields. Encapsulated with supporting
circuitry, this inductor makes a great power pick-up coil, signal receiver coil
or signal transmitter coil for small electronic implants, RF receivers and RF
transmitters. And these 8.2 mH coils are ideal for many passive filtering applications,
for examples, lower cut-off frequency LC filters (high-pass, low-pass, notch
and bandpass filters), and for filtering power supplies (especially switching
power supplies). Truly remarkable inductors - we know of no other inductor with
its capabilities! Comes on antistatic reel tape.
MANY RECEIVING & TRANSMITTING USES: These inductor coils can be used in
both receiving and transmitting applications for frequencies (freqs) from a
few Hz to upto about 20,000 Hz. To use these inductors to receive a magnetic
signal (e.g. for brainwaves, high-voltage line magnetic fields, hidden surveillance
devices, audio bandwidth magnetic signals, etc.), you need an appropriate amplifier
(amp) which has either a magnetic input or dynamic mike input. Then you connect
wires and end connectors to these inductors which are compatible with your amp.
These inductors have small built-in soldering pads (as shown) for soldering
up your wires. Bandwidth is critical. Many quality audio amps amplify down to
about 15 Hz - 25 Hz. Some brainwave and magnetic field signals are of lesser
freqs, and thus may not be amplified well by an audio amp, in which case, you
use a very low freq magnetic amp. Magnetic amps do not supply current to the
inductor's line. The fluctuations of the external magnetic field induces into
the inductor an electrical current and thus into the input line to the amp,
which current in the amp is typically converted into a voltage that is amplified
by the amp. For transmitting uses, you need an amp which will drive a small
magnetic load. Be careful not to exceed the 50ma output current rating, whether
DC or AC; since these inductors are rated at 72 ohms, output voltage to one
inductor should not exceed 3.6 VAC or 3.6 VDC. These inductors can of course
be wired in series (e.g. for greater output voltages) or parallel (e.g. for
both receiver and transmitter uses).
Note, that these are INDUCTORS - not mikes - so they do not pick-up sound directly
- only fluctuating magnetic fields. Also note that this sale is for inductors
only, and does NOT include cables, connectors, amplifiers, or anything else.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD110. - Price: $14.95
(15) 8.4MH INDUCTORS / 8.4 MH COILS
80 OHM, 100+MA, Magnetic Metals
New old stock (NOS). Magnetic Metals 8.4mH inductor coils (nominal 8mH inductors), 80 ohm. We run these 8.4 mH inductor coils at more than 100ma. When iron is brought near these 8.4 mH inductors front, inductance increases by about 10%. This means that these coils are great as pickup coils, for example, to pickup brainwaves, and magnetic fields - great for biofeedback, brainwaves, mind control and electronic attack research. And because the coils have a 1/8" diameter, almost 1/2" long hole in the center, see image, you can insert a permanent magnet, ferrite stud or iron stud (e.g. piece of 1/8" dia nail) to much increase the coil inductance for even greater sensitivity, to tune inductance, or to use these coils as solenoids or adapt as relays. And these 8.4 mH coils are ideal for many passive filtering applications, for examples, lower cut-off frequency LC filters (high-pass, low-pass, notch and bandpass filters), for filtering power supplies (especially switching power supplies), and for small audio crossover filters. These 8.4 mH inductors are 1/2" long and diameter of coil is 1/2".
Because these inductors are small, they are especially
great for pinpointing localized and small magnetic field sources, which is often
critical for brain research, surveillance, and where small magnetic field sources
are near or inside larger magnetic fields, such as ambient magnetic fields.
Encapsulated with supporting circuitry, this inductor makes a great power pick-up
coil, signal receiver coil or signal transmitter coil for small electronic implants,
RF receivers and RF transmitters. Truly remarkable inductors - we know of no
other inductor with its capabilities!
MANY RECEIVING & TRANSMITTING USES: These inductor coils can be used in both receiving and transmitting
applications for frequencies (freqs) from a few Hz to upto about
20,000 Hz. To use these
inductors to receive a magnetic signal (e.g. for brainwaves,
high-voltage line magnetic fields, hidden surveillance devices, audio bandwidth magnetic
signals, etc.), you need an appropriate amplifier (amp) which has either
a magnetic input or dynamic mike input. Then you connect wires and
end connectors to these inductors which are compatible with your amp.
These inductors have small built-in soldering pads (as shown) for
soldering up your wires. Bandwidth is critical. Many quality audio amps amplify down to about 15 Hz - 25 Hz. Some brainwave and magnetic
field signals are of lesser freqs, and thus may not be amplified well by an
audio amp, in which case, you use a very low freq magnetic
amp. Magnetic amps do not supply current to the inductor's line. The
fluctuations of the external magnetic field induces into the inductor
an electrical current and thus into the input line to the amp, which current
in the amp is typically converted into a voltage that is amplified by the amp. For transmitting uses, you need an amp which will drive a small magnetic load. Be careful not to exceed much beyond 100ma output current rating, whether DC or AC; since these inductors are rated at 80 ohms, output voltage to one inductor should not exceed 8.0 VAC or 8.0 VDC. These inductors can of course be wired in series (e.g. for greater output voltages) or parallel (e.g. for both receiver and transmitter uses).
Note, that these are INDUCTORS - not mikes - so they do not pick-up
sound directly - only fluctuating magnetic fields. Also note
that this sale is for inductors only, and does NOT include cables,
connectors, amplifiers, or anything else.
BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $19.95
-
(10) FEC0114 INDUCTOR COILS (FEC 0114 COILS),
VERSATILE & PROGRAMMABLE INDUCTORS, 8µH (8uH)
New old stock (NOS). These versatile FEC 0114 / FEC0114 inductors are about the size and shape of chess pawns. They are 1" long (excluding 3/8" long pins). Base diameter is 3/4", top diameter is 1/2". Top is mounted with a magnet. These FEC0114 inductor coils come as shown on the left with labeled heatshrink wrap, but this plastic wrap is easily removed with an Exacto knife to result in right image (heatshrink tubing works fine as a replacement wrap), which gives you the room to wrap another coil(s) directly on top of the existing coil for customized transformers. Coil resistance is about 0.03 ohms. Coil inductance is about 8µH (8uH) with no iron near coil top, but decreases to about 5µH (5uH) with iron near coil top. Top magnet is ceramic and moderately powerful, but can be demagnetized with a rare-earth magnet, in which case, inductance is about 36µH (36uH) with no iron near top and about 34µH (34uH) near iron body. Clearly, sensitivity is much higher with top magnet as is, however, you can partially demagnetize this magnet to fine tune the inductance betwen 8µH and 36µH. With wrap removed, you can modify the number of coil windings, and with the coil windings modified or unmodified, you can wrap additional layers of coil to make customized inductors or transformers. While three pins are shown, only two are connected to wires - the third pin can be ignored, clipped off or wired to something else. These non-documented features not only provide you great versatility in using these inductors in numerous coil and transformer designs, they also help you thwart efforts to reverse engineer your designs. You can also use these FEC0114 inductors to detect, count, control and tune rotations or movements of an iron or steel geared wheel or other iron objects where the rotating gear teeth or moving objects just clear the magnet (e.g. tachometer and assembly line designs). Or to detect and measure highly localized magnetic fields (for magnetic field strength meters). Other uses of these unusual and versatile FEC0114 coils are obviously as chess pawns, and as insulated standoffs and wire tie-down points. As insulated standoffs, you can detect and measure voltage drops between two points on a wire strung between two of these inductor coils or wrapped once around one coil. Or to detect and measure electromagnetic leakage from an insulated wire.
BUYER: Order by Title (below image) - Email us your order. - List History: LD110. - Price: $8.95
(10) 47µH INDUCTORs
New old stock (NOS). These 47µH (47uH) Inductors are 1/2" x 1/2" x 3/8" tall.
LIMITED QUANTITY. Only set left.
BUYER: Order by Title (below image) - Email us your order. - List History: LD116. - Price: $7.95
-
(50) 1µH INDUCTORS / 1µH COILS,
B82462A4102M
EPCOS, Small & Surface-Mount
New old stock (NOS), surface mount. EPCOS B82462A4102M / B82462A4-102M / 1uH Inductors / 1uH Coils, 4mm X 4mm X 1.5mm. Great for filtering out high-frequency interference, especially from front-end stages.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD153. - Price: $9.95
(25) 100µH INDUCTOR COILS
New old stock (NOS), SMT/SMD. These are small 100 µH (100uH) Inductor Coils for various RF, filter and general inductors uses. About 5/16' square, 1/4" tall. 100µH inductors come in antistatic reel tape.
BUYER: Order by Title (below image) - Email us your order. - List History: LD110. - Price: $9.95
(50) 46µH, 0.03ohm FEC 20-4405-46 INDUCTORS
New old stock (NOS). 7/16" diameter and 7/16" high. These 46 µH inductors are useful in a variety of designs, including power, RF, pulse generation, etc. We mostly use them to design some brainwave detection devices as they are sensitive to brainwaves.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD099. - Price: $12.95
(10) PULSE PE52627 / PE-52627 320µH INDUCTORS,
0.6 OHMS
New old stock (NOS). 320µH Coils, 0.6 ohm Pulse PE52627 / PE-52627 coils. 1.5 cm on each side, 1 cm tall, two pins diagnonal to each other. These 320 µH inductors are useful in a variety of designs, including power, RF, pulse generation, etc.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD099. - Price: $8.95
(25) 100mH POWER INDUCTORS / 100mH POWER COILS,
PL1123
These are new power 100mH inductors / 100mH coils, PL1123. Axial leads. Inductor body is 3/4" long.
BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $19.95. S/H: $8.90
LARGE, ADJUSTABLE STEEL INDUCTOR COIL
Great for Theremins, Antennas, Metal Detectors, Tank Circuits,
Crafts, Toys, etc.)
Used and in very good condition. We purchased this
in an electronics surplus store. These large springy metal inductors have practically
endless uses ranging from electronics, crafts, toys, model making, science projects
/ science fairs, etc. Compressed, they are 2-1/2" diameter and 2-1/2"
long. The conductor coil itself is about 1/8" wide and 1/32" thick.
It fully expands to about 10 feet long. Inductance varies from about 240 µH
(240µH, 99% compressed) to less than 40 µH (40µH, extended to
about 6 feet).
If you hold both ends and extend this metal inductor, it will sag in the middle.
What we normally do is use a wood or plastic (not metal) broom handle, dowel
rod, 2"x2" lumber, or heavy-duty carboard shipping tube as a stiff
form to string the inductor out on to maintain spring shape. For those uses,
such as antennas, where we need to keep the inductor length constant, we cement
the ends to the form, and sometimes spot cement some of the spring coils in
between.
we love to use these inductors in the tank circuits of homebuilt Theremin devices.
A "Theremin" is an audio special effects device that dates back to
about the 1920s, commonly used in those old horror and science fiction movies
to produce those scary sounds. By expanding and compressing the coils, the circuit's
LC tank circuit inductance is changed, thereby also changing the output frequencies,
resulting in very unusual Theremin-like sounds. Similar sounds can also be produced
by rubbing, flicking or moving the coils with an insulated iron bar. You can
get endless hours of fun and entertainment out of it, and it has real potential
of being developed into its own unique musical instrument to produces the really
cool and unique sounds for some of today's music.
This inductor also serves as a pretty good antenna and metal detector coil.
It has many exciting uses for the electronic hobbyist, and for science projects,
science fairs, and classroom demonstrations. It can be used as a big, strong
electromagnet because of the strong magnetic field it can be made to produce.
It also has crafts and shop uses. For examples, it can be used to make toys
of various kinds, as well as other craft creations, such as lamps, figures,
etc. And it can also be mechanically used to protect, reinforce and organize
many different kinds of items such as bundles of wires and cables, long tools,
tubes, pipes, rods and other shop stock.
This inductor looks a lot like a "slinky" toy. If it is a "slinky" toy it is not like any slinky that we played with as a kid, which were much larger and less springy feeling and not designed for electronic uses, and which we have never tested electronically.
LIMITED QUANTITY.
BUYER: Order by Title (below image) - Email us your order. - List History: LD093. - Price: $19.95
LINEAR LEDEX SOLENOID ACTUATOR /
LEDEX ACTUATOR LINEAR SOLENOID /
LINEAR LEDEX ACTUATOR SOLENOID 81840 1/4"
New old stock (NOS) ICs. One new linear Ledex linear actuator / solenoid, 81840. These very high quality machined stainless steel Ledex linear actuator solenoids are incredibly useful for many laboratory uses. The Ledex linear solenoid actuator coil is 16 ohms and 4 mH. 2" x 2" x 1/2". 6" leads.
LIMITED QUANTITY.
BUYER: Order by Title (below image) - Email us your order. - List History: LD061. - Price: $19.95
(1 REEL, 842 FERRITE BEADS) BLM31A601SPT FERRITE
BEADS,
600 OHMS at 100 MHz, 200ma
New old stock (NOS), SMT/SMD. BLM31A601SPT Ferrite Beads, 600 Ohms at 100 MHz, 200ma.
BUYER: Order by Title (below image) - Email us your order. - List History: LD116. - Price: $9.95
(20) FERRITE CORES / FERRITE RINGS, MATERIAL.061
New old stock (NOS) ferrite cores / ferrite rings, material.061. Great for power, radio, TV, other electronics. 1/2" x 1" dia., with 9/16" dia. hole. Great for making torroid coils / torroid transformers (toroid coils / toroid transformers), and for blocking transients on AC power lines.
BUYER: Order by Title (below image) - Email us your order. - List History: LD108. - Price: $14.95
SHARP PART, RCILZ0330GEZZ VCA25U
New old stock (NOS), 4 pins. Sharp part, RCILZ0330GEZZ VCA25U, labeled as a "coil". We got this in a box full of Sharp equipment ICs, and have no idea what they do or how they are used. We disassembed one (image center) by popping off the cover, and it apparently contains a highly specialized transducer.
BUYER: Order by Title (below image) - Email us your order. - List History: LD111. - Price: $9.95
RARE, HEAVY SOLENOID COIL / ELECTROMAGNET COIL
Used and in great condition. Rare, heavy solenoid coil or electromagnet coil, 2-1/2" long, 2" diameter. Hole is 15/16" dia. 4.5 ohms, 0.26 mH (260µH) inductance (inductance increases as iron approaches solenoid hole).
LIMITED QUANTITY. We have only a few of these left.
BUYER: Order by Title (below image) - Email us your order. - List History: LD123. - Price: $29.95
RARE, VINTAGE AIR DUX COIL, 808T
New old stock (NOS). Rare, vintage Air Dux Coil, 808T in original box. The 808T Air Dux coils are 1" dia, 3.0", 8 TPI, 18 AWG wire.
LIMITED QUANTITY. We have only a few of these left.
BUYER: Order by Title (below image) - Email us your order. - List History: LD123. - Price: $6.95
6-COIL ELECTROMAGNETIC COIL ASSEMBLY
FOR MOTORS, ROTATING MAGNETIC FIELDS
SPINDLE MOTORS, STEPPER MOTORS, SERVO MOTORS
New old stock (NOS). 6-Coil Electromagnetic Coil Assembly. Great as a motor stator (especially for spindle motors, servo motors and stepper motors), to create rotating magnetic fields, and for science projects. In fact, these were salvaged from the spindle motor of a new very high quality but obsolete floppy disk drive (few floppy disk drives have a coil arrangement like this). Coil board measure 3" x 3-1/2". Coil center-to-coil center spacing is 1-1/2". We don't know who makes this board. The IC is a BA6492FS, FDD Spindle Motor Driver IC for 3-phase, full-wave, soft switching motors. We find these multi-coil assemblies to be very useful for experimenting with rotating magnetic fields relevant to our research in radionics, mind control and electronic attack, because all the coils are virtually identical to each other with precise spacing - perfect for generating precision rotating magnetic fields. (NOTE: If you can sell us more of these boards or of similar coil assemblies, please let us know as we are interested).
LIMITED QUANTITY. We have only one of these left.
BUYER: Order by Title (below image) - Email us your order. - List History: LD123. - Price: $39.95
(20) TOKO ELECTRONICS 1464-9921J INDUCTORS /
CAPACITOR TRIPLET
New old stock (NOS) Toko Electronics 1464-9921J inductors / capacitors triplets. These triplets consist of 3 inductor/capacitor cans as shown above, fused together. Each can body is about 1/2" tall and 1/4" square, with a tuning screw at the top. We did some sample testing. The end cans of each triplet appear to be 20µH tunable inductors and the center can appears to be a 10pf tunable capacitor - probably RF oscillator tank circuits, and RF filters.
BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $9.95
SMALL TRANSFORMERS: Signal Transformers,
Pulse Transformers, RF Transformers, Switching Transformers, Isolation Transformers,
Small Power Transformers, Current Transformers, Variable Transformers, Autotransformers:
(For Power Transformers, Current Switches,
see POWER SUPPLIES, ENERGY HARDWARE)
(2) SPRAGUE 1:1:1 TRANSFORMERS 11Z2101
New old stock (NOS). Sprague 1:1:1 Transformers 11Z2101.
LIMITED QUANTITY. We have only one lot of these.
BUYER: Order by Title (below image) - Email us your order. - List History: LD159. - Price: $14.95.
(10) PULSE B2097T / B2097 D547-J 4-COIL TRANSFORMERS
Signal / Pulse / Switching / Ultrasonic / Sonar Transformers
New old stock (NOS). Pulse B2097 Transformers, SMT, 12-pins. B2097 are 4-Coil Signal / Pulse / Ultrasonic Signal Transformers / Sonar / Switching Power Supply Transformers, compact and efficient. These transformers have four sets of coil windings (two coil sets on each side). Sample of 10 averages: COIL #1: Pins 1-2, 16.8mH. COIL #2: Pins 5-6, 2.2mH. COIL #3: CT=Pin 9; Pins 7-9, 0.43mH; Pins 8-9, 1.44mH; Pins 7-8, 1.86mH. COIL #4: CT=Pin 10; Pins 10-12, 0.35mH; Pins 10-11, 1.72mH; Pins 11-12, 2.06mH. Pins 3 and 4 are not connected.
Bandwidth is about 20KHz to 300KHz. These B2097 transformers are ideal not only for switching power supplies but also for ultrasonic and sonar signal applications, and for other signals pulses within the BW. They can also be used for treble audio applications. B2097 Pulse Transformers shipped on antistatic reel tape, as shown.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD116. - Price: $9.95.
(6) HALO XFMRS XF0976-EFD15S 0223 /
XF0976EFD15S HIGH-FREQUENCY
SIGNAL TRANSFORMERS / PULSE TRANSFORMERS /
SWITCHING TRANSFORMERS
New old stock (NOS). Halo XFMRS XF0976-EFD15S 0223 / XF0976EFD15S Signal Transformers / Switching Transformers / Pulse Transformers. These 12-pin surface mount transformers are great signal transformers for ultrasound (hypersound), sonar, low-frequency RF, and switching power supplies. These transformers have 4 sets of 2-pin coils. Consider the bottom 6 pins to be Pin 1 (near dot) thru Pin 6, and the top opposing 6 pins to be Pins A thru Pin F: Coil Pins A-C is 4µH, Coil Pins B-D is 4µH, Coil Pins 1-6 is 25.5µH, and Coil Pins 2-4 is 96.5µH. Pins 3, 5, E and F are not wired. Turns ratios are unknown, but you can get a rough idea from the relative inductances. Power, voltage and current ratings are also unknown but compatible with Ethernet switching power supplies. These Halo XFMRS XF0976-EFD15S 0223 transformers tops are 5/8" square.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD170. - Price: $7.95.
(6) HALO XFMRS 2710-0088-Rev. 01 HIGH-FREQUENCY
SIGNAL TRANSFORMERS / PULSE TRANSFORMERS /
SWITCHING TRANSFORMERS
New old stock (NOS). Halo 2710-0088-Rev. 01 Signal Transformers / Switching Transformers / Pulse Transformers. These 12-pin surface mount transformers are great signal transformers for ultrasound (hypersound), sonar, low-frequency RF, and switching power supplies. These transformers have 5 sets of 2-pin coils. Consider the bottom 6 pins to be Pin 1 (near dot) thru Pin 6, and the top opposing 6 pins to be Pins A thru Pin F: Coil Pins A-1 is 10µH, Coil Pins B-2 is 10 µH, Coil Pins D-4 is 41µH, Coil Pins E-5 is 41µH, and Coil Pins F-6 is 41µH. Pins 3 and C are not wired. Turns ratios are unknown, but you can get a rough idea from the relative inductances. Power, voltage and current ratings are also unknown but compatible with Ethernet switching power supplies. These Halo 2710-0088-Rev. 01 transformers tops are 5/8" square.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD170. - Price: $7.95.
VARIABLE TRANSFORMERS, 120VAC, 1.25A, 50Hz/60Hz,
165VA
VARIABLE AUTOTRANSFORMERS; KNOBS (1/4" SHAFTS)
Four Variable Transformers, Variable Autotransformers,
120VAC, 1.25A, 50Hz / 60Hz, 165VA; and six knobs (1/4" shafts). Variable
autotransformers come without knobs; the knobs are sold separately but shipped
with variable transformer(s) at no additional S/H:
STACO Type 100BU, new, top left of bottom image,
50/60 Hz. $79.95.
STACO Type 100BU, used and works great, bottom
left of bottom image, 60 Hz. $69.95.
POWERSTAT Type 10, used and works great, top
right of bottom image, 60 Hz. $69.95.
POWERSTAT Type 10, used and works great, bottom
right of bottom image, 60 Hz. $69.95.
RARE BAKELITE KNOBS (all used): Large round knobs
(2), $5.00 ea; smaller round, knob $4.00; small oval knobs (3), $2.00 ea.
LIMITED QUANTITY. We have only one of each of these variable auto transformers. As supplies last.
BUYER: Order by Title (below image) - Email us your order. - List History: LD143. S/H: $11.90 for one auto transformer, add $5.90 S/H for each additional auto transformer when paid for together. If 1-6 knobs are shipped together, their total S/H is $5.90 total. Buy any in-stock combination you need.
SPITZNAGEL SMALL POWER TRANSFORMER
115V PRIMARY, 15V SECONDARY, 1.5VA, SPK011150010001
New old stock (NOS). Rare Spitznagel SPK011150010001 Power Transformer, 115V Primary / 15V Secondary, 1.5VA. Made in Germany.
LIMITED QUANTITY. We have only one of these.
BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $9.95.
RARE, VTG SIMPSON CURRENT TRANSFORMER, PART
NO. 1299
200A PRI., 5A SEC., 2VA, 50-800 HZ, 200/5 TURNS RATIO
New old stock (NOS), in original box. Rare, Vintage Simpson Current Transformer, Part No. 1299. 200 Amp Primary, 5 Amp Secondary, 2VA, 200/5 Turns Ratio, 50 - 800 Hz.
LIMITED QUANTITY. We have only one of these.
BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $29.95, S/H: $9.90
RARE THORDARSON 24S54 VOICE COIL TRANSFORMER
/
AUDIO TRANSFORMER / SPEAKER TRANSFORMER
PRIMARY: 15,000-20,000 OHMS, SECONDARY: 3.5 OHMS, 5W
New old stock (NOS), new in the box. Rare Vintage Thordarson 24S54 Voice Coil Transformer / Audio Transformer / Speaker Transformer, 5 watts. Primary: 15K ohms - 20K ohms. Secondary: 3.5 ohms at 5 watts. This Thordarson 24S54 transformer has very high primary impedance and turn ratios. This Thordarson 24S54 transformer can be used to greatly step down a high voltage, low current signal to a low voltage, high current signal. This Thordarson 24S54 transformer can also be used in reverse to boost a relatively low voltage input at its secondary, thereby producing a very large output voltage at its primary.
LIMITED QUANTITY. We have only a few of these.
BUYER: Order by Title (below image) - Email us your order. - List History: LD132. - Price: $24.95. S/H: $8.90
(5) TAMURA TTC-264
/ MICROTRAN TM105
AUDIO TRANSFORMERS / ULTRASONIC TRANSFORMERS
1.0:1.3, 450 Ohm - 600 Ohm, 300 Hz - 300 KHz,
2-Coil
SIGNAL TRANSFORMERS / WIDEBAND TRANSFORMERS
New old stock (NOS). Tamura TTC-264 / Microtran TM105 Audio Transformers / Ultrasonic Transformers / Signal Transformers, 1.0:1.3 Turns Ratio, 450 Ohm - 600 Ohm, 300 Hz - 300 KHz Bandwidth, 2-Coil Wideband Transformers. Most other signal transformers we run into that are 600 Ohm - 600 Ohm or similar are either strictly audio or strictly ultrasonic but don't cover both bands. These Tamura TTC-264 / Microtran TM105 Transformers are very versatile for audio, ultrasonic, sonar and many switching power supply applications. And you get a bit of a voltage boost out of them while not adversely affecting impedance too much, so these transformers are also very useful where that extra voltage boost is helpful.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD130. - Price: $9.95
(10) MIDCOM NW548BABT / NW548 / NV546 / 50522R
SMALL SIGNAL TRANSFORMERS / PULSE TRANSFORMERS
New old stock (NOS). NW548BABT / NW548 / / NV546 50522R Small Signal Transformers / Pulse Transformers, Midcom. Surface mount and easily soldered with leads. Also used for switching power supplies. These compact Midcom transformers measure 1/2" x 1/2" x 1/2". They have 4 independent coils, each of 0.1mH (100µH (100uH)) inductance. Provides not only excellent isolation for frequencies above audio (e.g. ultrasonic / sonar / switching voltage regulators / IF circuits), but also serves as a nice signal splitter. Provided on reel tape.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD128. - Price: $9.95
(2) MIDCOM PF648 / PF 648 TRANSFORMERS SMALL SIGNAL TRANSFORMERS / PULSE TRANSFORMERS
New old stock (NOS). Midcom PF648 / PF 648 Transformers, Small Signal Transformers / Pulse Transformers. These Midcom PF648 transformers have 6 independent coils, which measure 0.03mH (30µH (30uH)), 0.03mH (30µH), 0.14mH (140µH (140uH)), 1.7mH (and 0.5 ohm), 2.56mH (and 0.4 ohm), and 2.56mH (and 0.4 ohm). Center hole is 3/16" dia, 7/8" long. Inductances are substantially increased by inserting a soft iron rod, bolt or stud into it. These versatile transformers are very useful for audio and ultrasonic/sonar applications, general signal uses, pulse uses, switching power supplies, etc. These PF648 transformers provide high-frequency 1:1 turn ratio, low-frequency 1:1 turn ratio, and 6 possible step-up / step-down configurations are possible.
BUYER: Order by Title (below image) - Email us your order. - List History: LD128. - Price: $7.95
(10) TRANSFORMERS 1PXF0076-EFD20S
1:1:1.8:1:6, 32V @ 0.72A, 1P XF0076
New old stock (NOS). Transformers, 1PXF0076-EFD20S / 1P XF0076, 4 sets of coils, 1:1, 1:1, 1:6, 1:8 winding ratios, 32V @ 0.72A. We use these for the 250 KHz - 10 MHz sinewave bands, and for pulse frequencies, 1KHz - 1MHz. Originally designed for switching power supplies, but these transformers are also great for isolating ultrasonic and sonar circuits, and for coupling signals onto lines normally used for other purposes. Because these transformers are well-shielded, even operating at their highest frequencies, these transformers produce very little EFI.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD125. - Price: $9.95
(10) REG255 9001-B SMT TRANSFORMERS
ULTRASONIC SIGNAL TRANSFORMERS /
SWITCHING POWER SUPPLY TRANSFORMERS
New old stock (NOS), SMT transformers. REG255 9001-B Ultrasonic Signal Transformers / Switching Power Supply Transformers, compact and efficient. These transformers have two sets of coil windings (one coil on each side), one with 4 pins (2 taps) and one with 2 pins, so several wiring variations can be done, making these signal transformers very versatile. Pin spacing is 0.1". The 2-pin coil is about 250µH (250uH) inductance. The 4-pin coil set has inductance of about 550µH between end pins. Turns ratio is 1:1.5 between the 250µH and 550µH (550uH) coils (greater turns ratios for other connections to the 4-pin coil), with a bandwidth of 20KHz to 1.5MHz. These REG255 transformers are ideal not only for switching power supplies but also for ultrasonic signal applications and sonar signal applications. Ultrasonic transformers / sonar transformers usable down to about 10 KHz, so they can also be used for treble audio applications. Also usable to upto about 3 MHz. If you break off the ferrite frame with pliers, you can shift the bandwidth up by about 10X for higher frequency applications. REG255 ultrasonic transfomers shipped on antistatic reel tape.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD122. - Price: $9.95
(20) TSD-1154 / TSD1154 RF FLYBACK TRANSFORMERS
/
MWPG640-1118-12, "MAG XFA XFMR, FLYBACK, 48 T"
FLYBACK TRANSFORMERS / RF TRANSFORMERS /
SIGNAL TRANSFORMERS / PULSE TRANSFORMERS
New old stock (NOS) SMT/SMD transformers. Premier Magnetics TSD-1154 / TSD1154 Flyback Transformers work well as RF Transformers, Signal Transformers, and Pulse Transformers. Reel is labeled "MWPG640-1118-12" and "MAG XFA XFMR, Flyback, 48T". Transformers are labeled, "TSD-1154", "M 640-1118-12", and "0229". These TSD-1154 flyback transformers have two sets of coils: (1) 2-pin set (62µH), and (2) Center-tapped 3-pin coil (39µH across outer two pins). Testing of these TSD-1154 transformers indicate a bandwidth between about 800 KHz and 20+ MHz, so they are high-frequency transformers (20 MHz signal generator was what we had on hand to test them). These small TSD-1154 flyback transformers are 1/2" wide (including pins), 3/8" long and 1/4" high. TSD1154 high frequency wideband transformers shipped in antistatic tube or foam.
BUYER: Order by Title (below image) - Email us your order. - List History: LD114. - Price: $9.95
(25) PULSE MFG. B4003 WIDEBAND RF TRANSFORMERS
/
INDUCTOR PAIRS / COIL PAIRS
New old stock (NOS), SMT/SMD. These small, compact, highly-efficient Pulse B4003 transformers are really great for many RF transformer, signal transformer, pulse transformer and inductor applications. They consist of two commonly wound torroid coils. We have used these very useful and versatile transformers for countless radio receiver inputs, low-powered radio transmitter outputs, LC oscillators, signal injectors, trigger pulse isolators, and various other transformer and inductor applications.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD100, LR101-S01. - Price: $12.95
PULSE MFG. B4005 WIDEBAND RF TRANSFORMERS /
INDUCTOR PAIRS / COIL PAIRS,
New old stock (NOS) Pulse B4005 inductor pairs / transformers. These small, compact, highly-efficient Pulse B 4005 transformers are really great for many RF transformer, pulse transformer, signal transformer, and inductor applications. They consist of two commonly wound coils of about 175 µH (175 microhenry) each, coil resistances are about 0.5 ohms each. The two 0.1 inch spaced pins on one side are the winding connections for the primary/secondary, and the two 0.1 inch spaced pins on the other side are the winding connections for the secondary/primary. Both the primary and secondary appear to be identical for a 1:1 turns ratio. And of course by cascading them you can get turns ratios of 1:2, 2:1, 1:3, 3:1, etc. We have used these very useful and versatile transformers for countless radio receiver inputs, low-powered radio transmitter outputs, LC oscillators, signal injectors, trigger pulse isolators, and various other transformer and inductor applications. They are also particularly easy to use in prototyping because the leads are 0.3" apart along the width and 0.1" apart along the thickness - making them ideal for solderless prototype breadboards (perfectly spanning the solderless breadboard center gap), for example.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. -
List History:
(25) B4005 INDUCTORS/TRANSFORMERS: LD094, LR094-S01, LR100-S01. - Price: $12.95
(50) B4005 INDUCTORS/TRANSFORMERS: LD094. - Price: $44.95 + S/H: $9.90
(20) PULSE PE65101-001 / PE-65101-001
ISOLATION RF TRANSFORMERS, 15-PIN
New old stock (NOS) Pulse PE65101-001 / PE-65101-001 RF Isolation Transformers. 15-pin DIP/DIL, 1" x 1/2" x 3/8" (excluding pins), with 0.1" pin spacing (pin row spacing 0.4"). Consists of two 1:1 transformers. One transformer consists of 2 pins on each side, each coil about 2Mh (2000µH). One transformer consists of 5 pins on each side (3 taps for each side), each coil is about 0.5Mh (500µH). Shipped in its antistatic tube.
BUYER: Order by Title (below image) - Email us your order. - List History: LD108. - Price: $9.95
(50) HALO TG01-0756, POTTED TRANSFORMER, TOROID
COILS
New old stock, SMT/SMD ICs. Parts provided in antistatic tube, foam or reel tape.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD098. - Price: $9.95
(17) ISOLATION TRANSFORMERS /
RF TRANSFORMERS / SIGNAL TRANSFORMERS, 2R5SFA
New old stock (NOS). Isolation transformers / RF transformers / signal transformers, 2R5SFA.
UNIQUE ITEM. We have only one lot of these left.
BUYER: Order by Title (below image) - Email us your order. - List History: LD0100. - Price: $24.95
(10) SIGNAL TRANSFORMERS / RF TRANSFORMERS /
PULSE TRANSFORMERS, 3 SEPARATE COIL WINDINGS
XH320401 / XH 320401 TRANSFORMERs
New old stock (NOS). These RF / signal / pulse transformers are about 9/16" in diameter and 1/2" tall (pin lengths add about another 1/4" to height). They have a ferrite core. They have 9 pins total, and consist of 3 pins per transformer winding for 3 sets of co-wound transformer coils on the same spool. The 3 coils measure: (1) 16mH at 18.6 ohms, (2) 157µH at 1.15 ohms, and (3) 5µH at 0.35 ohm. Other than running some preliminary tests on them and being very satisfied with the results, we have not thoroughly tested them, but my belief is that they are probably used for high-voltage, low-current step-up applications.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD097. - Price: $14.95
(4) GCI TRANSFORMERS, 5604-0198-01 REV. A,
PULSE TRANSFORMERS, SIGNAL TRANSFORMERS
New old stock (NOS). We bought a ton of these - and am selling my extra stock. These are isolation RF / signal / pulse transformers.
On one side of transformer, there are 6 pins, which are for 3 sets of independent windings. Each pair of these 3 windings is less than 0.1 ohms resistance. Two of these windings measure 1µH inductance, and one measures 46µH.
On the other side, there are 5 pins, which are for 2 sets independent windings. One winding is tapped, and measures less than.1 ohm and 16µH from tap to one pin and 0.2 ohm and 0.2µH from tap to other pin. The other winding measures 0.4 ohm and 570µH.
These transformers can be used to as 1:1 ratio isolation transformers or as step-up and step-down transformers, up to about 16:1. Bandwidth is about 50KHz to about 50MHz.
LIMITED QUANTITY.
BUYER: Order by Title (below image) - Email us your order. - List History: LD099, LR102-S02. - Price: $19.95
(25) PULSE MFG. PE68383 / PE-68383 TRANSFORMERS
New old stock (NOS), SMT/SMD (has curled up leads that serve as solder pads for surface mounting, but leads can be carefully uncurled to about 1/4" each for insertion into PC board holes). These small, compact, highly-efficient PE68383 Pulse transformers are great for many RF transformer, pulse transformer, signal transformer and high-frequency inductor applications. The PE-68383 has two independent sets of coils, each about 40µH and 0.1 ohms. These are torroid transformers (toroid transformers), and measure about 1/2" on each side.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. -
List History: LD061, LR094-S01. - Price: $12.95
(10) XFMRS XF5306-CMC7 TORROID / TOROID TRANSFORMERS,
1MH
New old stock (NOS). XFMRS XF5306-CMC7 PC-board mounted Torroid Transformers (Toroid Transformers), 1" x 1.25". Each of the transformer's 2 coils is about 1mH. Current rating is probably around 7 Amps. Great for many small coupling applications from RF to switching power supplies, and many other uses. The leads are curled up for surface-mounting, but can be uncurled to about 1/4" long for leaded mounting. Comes on reel tape.
BUYER: Order by Title (below image) - Email us your order. - List History: LD110. - Price: $12.95
(10) PULSE P0351 TORROID / TOROID TRANSFORMERS,
2MH
New old stock (NOS). PULSE P0351 PC-board mounted Torroid Transformers / Toroid Transformers, 3/4" x 3/4". Each of the transformer's 2 coils is about 2mH. Current rating is probably around 3 Amps. Great for many small coupling applications from RF to switching power supplies, and many other uses. The leads are curled up for surface-mounting, but can be uncurled to about 1/4" long for leaded mounting. Comes on reel tape.
BUYER: Order by Title (below image) - Email us your order. - List History: LD110. - Price: $9.95
ISOLATION TRANSFORMERS /
RF TRANSFORMERS / SIGNAL TRANSFORMERS, Hi Rel 11476
New old stock (NOS). We bought a ton of these - and am selling my extra stock. These isolation RF / signal / pulse transformers have 2 sets of windings with the same inductance (2.5mH) and resistance (2.5 ohm) on each side. The coil is a spool-wound coil with a ferrite shroud, 1/2" diameter. 3 pins on each side (middle pin is center-tapped), with pin-to-pin spacing of 3/20" (which means that the end pins are 0.3" apart), and spacing between pin rows of 9/16". Because the inductances and resistances are equal on both sides, these make great 1:1 isolation transformers. And because these transformers are center-tapped, you can do 1:2 step-up and 2:1 step-down transformer applications with them.
These are spool-wound transformers (not torroid/toroid transformers), which means that if you remove the ferrite shroud, you can use them as metal detection and magnetic field pick-up coils / transducers. This is really nice because what you can do is inject a high-frequency signal into one set of windings and observe the isolated output of the second set of windings as modified by metal or magnetic field the transducer is exposed to, thereby detecting the presence and quantity of the metal or the presence, intensity, frequency, duration, waveform and modulation of the magnetic field. For example, we found that these so-modified small transformers are excellent for studying brainwaves and brainwave signatures, biofeedback, electronic implant detection, etc. for my work for Consumertronics.net and Lone Star Consulting, Inc. For some of my many mind control, electronic attack and biofeedback publications and hardware We are selling, please see my webpages. Other great applications we get out of them is antenna isolation, high-voltage section isolation, and SCR triggering.
I found that removal of the ferrite shroud is best done by using a small grinding wheel to carefully grind off the ferrite bridge at the top of the coil (across the label), at which point the shroud comes to pieces and is easily removed. When the ferrite is removed, the about 1/4"-thick spool has a 3/16" through center hole, where you can boost some of the inductance lost due to the removal of the shroud by inserting a piece of ferrite slug or soft iron rod (e.g. an iron nail head).
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. -
List History:
(10) HI REL 11476 ISOLATION TRANSFORMERS: LD097. - Price: $12.95
(25) HI REL 11476 ISOLATION TRANSFORMERS: LD097. - Price: $29.95
(20) HALO TG01-0756, POTTED TRANSFORMER /
TORROID INDUCTORS / TORROID COILS
New old stock (NOS), SMT/SMD ICs. Parts provided in antistatic tube, foam or reel tape.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD098. - Price: $9.95
(20) RL3982 / RL-3982 SIGNAL TRANSFORMERS, Renco
New old stock (NOS), SMT/SMD. Renco RL3982 / RL-3982 Signal Transformers. These Renco transformers are about 1/2" long, 3/8" wide (excluding pins) and 1/4" tall. Pins are laid out like 8-pin DIP or SOIC ICs, using the same convention, Pins #1 and #4 is one coil, about 70mH. Pins #5, #6, #7 form a center-tapped coil with Pins #5 and #7 at about 10mH and Pins #8 and #7 are also at about 10mH. Turns ratio is about 1:1.3 (about 1:2.6 for each pair). Transformer bandwidth is good from about 7 KHz to about 1.25 MHz. These Renco transformers are ideal for ultrasonic, sonar and switching power supply applications. Or you can just use either side as a stand-alone inductor if you need relatively high inductances in a compact package.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD139. - Price: $12.95.
MRC TECH II RAILMASTER 2400 MODEL RAILROAD
PULSE POWER PACK, HO RAILROAD / N-GAUGE RAILROAD
Used and in great condition. MRC Tech II Railmaster 2400 Pulse Power Pack HO Ngauge (N-Scale model train sets). This MRC Tech II Railmaster 2400 Power Pack pack features ergomatic oversized throttle, pulse power control, proportional tracking, and variable brightness power indicator plus an overload indicator! Very versatile and easy to use for many other power applications as well. Outputs 14VDC, 15VDC and 18.5 VAC.
LIMITED QUANTITY. We have only one of these.
BUYER: Order by Title (below image) - Email us your order. - List History: LD128. - Price: $19.95
RARE, VINTAGE PIKO MODELLBAHN
ME 005, BR 55 (HO) RAILROAD TRANSFORMER
for MODEL RAILROADS
Used and works great. Model Railroad isolation transformer. Used. Apparently German-made. Comes with a European-type AC power connector (see image left side). We have not been able to test model transformer, so its condition is unknown to me, and we cannot guarantee condition. We bought it at an estate sale (others got the train sets). 220 VAC, 33.6VA, 50 Hz input; 1.7 - 12 VDC, 1.2A 1st output (Bahn), 16 VAC, 1.2A 2nd output (Zubehor). 8" x 4-3/4" x 4".
UNIQUE ITEM - We have only one of these.
BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LS092-R25. - Price: $74.95. S/H: $9, 7 lbs
Small Speakers, LC-Filters, Sounders, Sensors, Transducers:
(4) THIN, SMALL AUDIO SPEAKERS / ULTRASONIC
SPEAKERS /
LAPTOP SPEAKERS, 8-OHM, 1-WATT
New old stock (NOS). Slim, small Audio Speakers / Ultrasonic Speakers / Laptop Speakers. 8-ohm, 1-watt. 1-1/2" diameter wide, only 3/16" thick, with standard plug-in for computers (including laptops), and some audio recorders. These audio/ultrasonic speakers have expensive very powerful rare earth magnets. These speakers work way into the ultrasonic frequency range. We bought a bunch of these and are saving 95% of them for our labs because they are really great speakers for many applications.
LIMITED QUANTITY.
BUYER: Order by Title (below image) - Email us your order. - List History: LD131. - Price: $9.95.
-
(4) LAPTOP SPEAKERS / MINEATURE SPEAKERS
Used and in great condition. Laptop speakers, miniature speakers with metal grills. We don't know their laptop computer makes and models. While they all basically look very similar to each other and like above, and use the same connector and are all salvaged from laptops, their sizes and shapes vary some, and include both left speakers and right speakers. Each laptop speaker does have two screw holes for easy mounting in an enclosure. Using a band saw, we were able to remove a couple of the actual speaker units and they are about the size of a quarter. Frequency range is quite impressive - goes from about 1 KHz to well into the ultrasonic and sonar bands.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD125. - Price: $8.95.
-
(2) ASP 8-OHM SMALL COMPUTER SPEAKERS / LAPTOP SPEAKERS /
TWEETER SPEAKERS / TREBLE SPEAKERS, 1.5W, P/N: 39M0605
New old stock (NOS, in original packages) ASP 8-ohm tweeter speakers / treble speakers, 1.5 watt. Hole-to-hole spacing is 3" (length) and 1.5" (width). Speakers are 1" deep. Very high quality speakers - great for both music and voice. Sample testing indicates that they work great from about 50 Hz to about 22 KHz. They also use a powerful magnet, which you can salvage if you wish when you are done with the speakers.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD108. - Price: $8.95.
(2) 110 DB PIEZO
SOUNDERS, SHRILL ALARM SOUNDERS,
100DB PIEZO BEEPERS, 110MA 12VDC
New old stock (NOS). 110db Piezo Sounders / Shrill Piezo Alarm Sounders / Piezo Beepers (110 db output at 1 meter), 12VDC, 110ma. Convenient holes for easy mounting. Also operates with pulsed input, modulated pulse input, rectified input and decaying positive input - great for varying types of sound. These are high quality piezo sounders - not the widely sold small, cheezy very similar-looking sounders. 3.25" dia base, 1.75" tall, 2-7/8" spacing between opposite holes.
LIMITED QUANTITY.
BUYER: Order by Title (below image) - Email us your order. - List History: LD128. - Price: $8.95.
(25) SMALL PIEZO
AUDIO SPEAKERS / SOUND SPEAKERs
New old stock (NOS). Small, Piezoelectric Audio Speakers Sound Speakers. 5/16" dia, 1/10" thick. 500 Hz - 9+ KHz. Wideband audio speakers with good sound output level for small piezo speakers. Great for very compact audio speakers that fit into small spaces.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD130. - Price: $6.95
(10) MINIATURE
SPEAKERS / TREBLE SPEAKERS /
ULTRASOUND SPEAKERS / ULTRASONIC SPEAKERS
HYPERSOUND SPEAKERS / HYPERSONIC SPEAKERS /
ULTRASOUND SOUNDERS / ULTRASONIC SOUNDERS
HYPERSOUND SOUNDERS / HYPERSONIC SOUNDERS /
ULTRASOUND TRANSDUCERS / ULTRASONIC TRANSDUCERS
HYPERSOUND TRANSDUCERS / HYPERSONIC TRANSDUCERS
New old stock (NOS). We use these small, very high quality treble/ultrasonic transducers miniature speakers for both treble audio applications and ultrasonic applications. They are a small 20mm (2 cm) in diameter and 3 mm thick. They are 110 ohms, 2 Mh. Images were taken under my 10X microscope which field was too small to capture all of the ultrasonic speaker with one shot, and we wanted to also show their really nice gold-plated speaker contacts. The permanent magnets on these ultrasound transducers are pretty strong, and we salvaged some of these speakers from my huge personal stock for their magnets.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD100, LR101-S01. - Price: $9.95
-
(5) VERSATILE
/ ACCESSIBLE UMEC UT20145
ADSL POTS PHONE LOW PASS FILTER BOXES
These new Umec ADSL Pots UT20145 telephone low pass filter phone boxes are really great, especially for the experimenter! These were originally made for - and still function very well as - line filters for DSL applications. The enclosures themselves are heavy-duty plastic 4" x 2-1/4" x 1". As you see, the circuit board is easily removed, letting you use this nice enclosure for prototype projects you may be working on - high quality substitutes for expensive Budd boxes. It has a flange that protrudes from the base 1/2" on each side with a center hole for convenient mounting. The board itself has 3 RJ-11 phone jacks: One phone jack for the Line, one for filtered Output and one for unfiltered Output. The PC board also consists of sets of series inductors and parallel capacitors used to perform the low pass filter function. The enclosure cut-outs for the RJ-11 connectors can be used for other connectors, or you can cut off the RJ-11 connectors from the boards and mount them on your own circuit board. RJ-11 cables are very common and inexpensive, and can be used for many phone and non-phone applications. The 3db cut-off is 7 KHz. Attenuation is 12db at 8 KHz, 60db at 20 KHz, and 72db at 40 KHz. Insertion loss from 200 Hz to 4 KHz is 0.5db. These connectors, inductors and capacitors can easily be removed, changed or added to should you need to change your low-pass filter characteristics or even to change the filter to bandpass filters.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD106. - Price: $19.95. S/H: $9.90
(20) G 4960M
/ G4960M KB-H1 SIEMENS MATSUSHITA
SAW FILTERS (TV), S + M
New old stock (NOS). G4960M Siemens Matsushita SAW filters. SAW filters is an exciting technology for the experimenter with many actual and potential applications. SAW => Surface Acoustic Wave resonator filters. These S+M SAW filters are used in TV modulators. Comes in antistatic tubes.
DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.
BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LR095-S01. - Price: $9.95
HIGH-TECH EXPERIENCED PROFESSIONALISM: Many "high-tech business" owners and their employees today are clearly woefully ignorant of the high technologies they sell (including some giant electronic parts houses!). ABQ Techzonics of Albuquerque, NM, USA, is owned by John Williams, M.S.E.E. Mr. Williams is a former Senior Electronics Design Engineer (Lockheed EMSCO); Professor of Computer Science (New Mexico State University (NMSU)); Electronics Weapons Design Engineer (U.S. Navy, U.S. Air Force); Health Physicist (National Institutes of Health (NIH)), etc. Williams is also currently President of Lone Star Consulting, Inc. and CEO of Consumertronics.net. While we don't know everything about everything tech (no one does), we have a high level of expertise. We sell a lot of electronic components / electrical components. Most of these electronic components / electrical components are small electronic parts / electrical parts, such as integrated circuits, optical devices, transistors, rectifiers, diodes, transformers, inductors, capacitors, resistors, displays, switches, relays, crystals, oscillators, transducers, sensors, prototyping, connectors, fuses, wire/cable, power components, etc., as well as some larger electronic parts / electrical parts and electronic test equipment, scientific equipment and industrial equipment / parts, electrical equipment / electronic equipment in general, tools, mounting hardware parts, and special materials. And we also buy and trade these types of items (Trade & Buy Offers). And unlike most electrical / electronic components sellers, many of the electrical / electronic component, etc. lots we buy we set aside some of the electrical / electronic parts, etc. for our own electronic projects and research. We sell those electrical / electronic parts, etc. we don't use. Our suppliers know that if their electrical / electronic parts, electronic test equipment, etc. aren't excellent, good chance we will discover it and they'll hear about it!
ABQ TECHZONICS (Albuquerque, NM) SELLS, BUYS & TRADES: ELECTRONIC COMPONENTS, ELECTRONIC PARTS, ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Thermistors, Crystals, Oscillators, Sensors, Transducers, Optoelectronics, Prototyping, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, RF, Microwave, Electronic Modules, Power Adapters, Power Supplies, other Electronic Parts / Electronic Components / Electronic Subassemblies / Electronic Assemblies. EQUIPMENT, DEVICES: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Mechanics Tools, Precision Tools, Tool Chests. MORE TECH STUFF: Commercial/Industrial/Scientific/Laboratory Valves, Fittings, Hardware Parts, Mechanical Parts, Supplies, Special Materials, Personal Security, Survival (Survivalists / Preppers), Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Books, Manuals, Software, Collectibles.
SOURCES OF ITEMS ABQ TECHZONICS SELLS: Surplus, online auctions, hamfests, private sales, business moving sales, overstocks, job lots, wholesale lots, estate sales, garage sales, thrift shops, charity auctions, flea markets, hardware trades, abandoned storage, lost & found property sales, discontinued items, obsolete items, warehouse inventory updates, excess inventories, liquidations, business closures and out-of-business sales, foreclosure sales, bankruptcies, government auctions / government sales, new salvage sales, and other sources for integrated circuits (ICs), electronic parts / electronic components, hardware, special materials, etc., Albuquerque, NM area preferred but will buy from anywhere. ABQ Techzonics is both a wholesale sellers/wholesale traders/wholesale buyers and retail sellers/retail traders/retail buyers, largely depending on quantity.
IMAGE SPONSORED BY: Consumertronics Lone Star Consulting, Inc. ABQ Techzonics REPRINT POW-MIA IMAGE=> ON YOUR WEBSITE |
NOTE: By policy, we never recommend for or against,
approve or disapprove, sponsor, endorse, support,
guarantee, or take any responsibility for any
of the content of any non-Consumertronics webpage,
website, advertisement, publication or other
statement EVEN IF WE HAVE PROVIDED A HOTLINK
TO IT. And by policy, we never recommend for
or against, approve or disapprove, sponsor, endorse,
support, guarantee, or assume any liability or
any other responsibility for any non-Consumertronics
company, product or service EVEN IF WE HAVE PROVIDED
A HOTLINK TO IT and EVEN IF WE HAVE DISCUSSED
IT OR INFORMED YOU ABOUT IT on a webpage, or
by phone, email, USPS mail, or by any other
means of communications. Everything we sell is sold strictly for legal utility, educational and/or entertainment purposes only, and is based on our policies on our policies.htm webpage.
Test Source Links only (no visitor
use): Source-1,
Source-2,
Source-3,
Source-4,
Source-5,
Source-6,
Source-7,
Source-10,
Source-11