ABQ Techzonics Security Electronics,Survival Electronics,Personal Safety Devices

ABQ Techzonics Organization Earthshaking Online Tech Superstore
We Seriously Consider all Reasonable Best Offers, Price Negotiations, Trade Offers!
We are Your Perfect One-Stop-Shopping Superstore to Fill Your High-Tech Parts Lists!

Physical Survival Electronics, Personal Security Electronics and Personal Safety Electronics, relevant to: Personal Protection and Safety, Crime Fighting, Crime Prevention, Natural Disasters, Manmade Disasters, Countermeasures, Self-Defense, Alarm Systems, Police, Military, Accident Prevention, Radionics, Mind Control and Direct Energy Weapons Attacks, Electronic Attack Countermeasures
[For PERSONAL SECURITY, PHYSICAL SURVIVAL and PERSONAL SAFETY MECHANICAL DEVICES (non-electronic hardware), see our Security/Survival Mechanical Webpage]

SEE OUR SUPERSTORE webpages FOR: ELECTRONIC COMPONENTS / ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Crystals, Oscillators, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, Power, other Electronic Parts / Electronic Components. EQUIPMENT: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Tool Chests, Vehicles (Cars, Trucks, Bikes). MORE TECH STUFF: Scientific/Industrial Valves, Fittings, Personal Security, Survival (Survivalists / Preppers), Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Collectibles - Hardware, Devices, Parts, Special Materials, Books, Manuals, Software

Consumertronics.net, P. O. Box 23097, Albuquerque, NM 87192

Contact: wizguru@consumertronics.net
Voice: 505-321-1034 (9-5 MST, M-F)
Please EMAIL US for all Orders, Inquiries and Questions

SEARCHING FOR ITEMS: Items are enterred in this webpage mostly based on order we obtain them. Please use top-right search box or your Browser Search / Find feature to locate the specific Items of interest or just browse webpage. We listed many Items by more than one name and name variation (e.g. "EMF detectors", "electromagnetic detectors", "magnetic detectors", "magnetic field detectors", "electrical detectors", and "electric field detectors"). If you can't find Item on webpage, try by other name variations, and then by function and functional variations, then search our other likely webpages, see SITEMAP for links.

ITEM CONDITIONS: Unless otherwise indicated, all items described on this webpage are new old stock (NOS) and never used. We often buy and trade for new electronic parts, electronic test equipment, and other items of the types described herein, preferably in larger quantities, some which we set aside for our own electronic laboratory, shop and other inventories and some we resell herein. Should you have items to sell or trade of these types, please let us know via email. All small parts and materials we acquire for resale herein must be new, but we often buy and trade for used large parts, tools, equipment and books in very good conditions, which we describe as "used" for those we resell. Please email us (please don't call as we are often in our labs), use email Subject: "Buy/Sell/Trade Inquiry."

DESCRIPTIONS & IMAGES: Unlike many Online stores, our goal is to always provide you clear and correct item images, and accurate and reasonably complete item descriptions. While we have tried to be 100% accurate in our descriptions and images, please freely let us know of any errors or omissions made herein, for example, by emailing us URLs to relevant datasheets. While images usually help, most of the items we sell are already well known. If any of our descriptions or images are missing, incomplete or inaccurate and this affects your purchase decision, please email us (please don't phone; put "Need Better Info for Item" in email Subject Line) so we can make reasonable corrections. Many of our images of electrical and electronic hardware do not show all of the leads or cabling which the actual items have so that we can provide bigger and clearer images of the body of the items to better show part numbers, labeling, features and cosmetic conditions.

POLICIES: Unless explicitly stated otherwise on this webpage, all applicable Techzonics organization policies are found at: www.consumertronics.net/policies.htm.

PAYMENTS: We accept checks, money orders, PayPal (PP), Money Transfer Service (MTS) payment, trade and cash. Simply email us (wizguru) a list of what you want (Title, name or part # of each choice), include the prices with S/H, and your name, shipping address and preferred payment method, or use one of our Consumertronics Online Order Forms. We ship within 2 work days after full payment clearance period from day of deposit. All payments must be made in $US. Details below:
     (1) FASTEST SHIPPING: U.S. Postal Money Order (PMO), Canadian PMO (made out in $US), PP, MTS and cash are considered to be same-as-cash by us - clearance period is zero days. Note: We are not responsible for cash sent in the mails, so conceal well.
     (2) MOs & CHECKS DETAILS: Pay to: "Consumertronics". ALL NON-PMO MOs & CHECKS : Clearance period: 10+ days if $20-$100, 20+ days if $101-$250, 30+ days if over $250.
     (3) MONEY TRANFER SERVICES (MTS) DETAILS: Pay to: "John Williams" (due to fact that using MTS to pay to a business name is usually a major hassle). All MTS payments over $500 require prior written approval by us. While almost all MTS arrive here within an hour, a few may take 1-3 days.
     (4) PAYPAL (PP) DETAILS: Before paying us by PP, email us with your order details and for our prior approval. Should we verify that your amount is correct and approve PP for you, go to PP. Do a PP "Send Money" to: "wizguru@consumertronics.net". PP over $50 require prior, explicit, written approval by us via email, and PP payers must be Verified PP users, which transaction PP must provide Seller Protection. For both verifiable and repeat Buyers, ABQ Techzonics may greatly increase the PP limit, in which case, it emails to Buyer his/her new PP level.
     (5) ITEMS FOR TRADE DETAILS: Who doesn't want to save cash these days! We do accept Items of Trade. By doing Items For Trade, you save money and get rid of good Item(s) you need less than Items we offer. Prior explicit permission from us is required before you ship to us any Item for trade. If interested, email us (wizguru, put in email Subject Line: "Item for Trade Inquiry.") with full details of what you have to offer and what you want for it (you must have sole and exclusive ownership of all Items you offer to us for trade). Include complete description of all Item(s), including Item make and model/part numbers, conditions, quantities, defects. Please do NOT phone us about Items of trade. If interested we will email you back with conditional acceptance or a counteroffer. If mutual acceptance results, we will then email you our permission to ship the Items, which you do at your S/H expense. Once your trade Items arrive here, we will examine them, which usually takes 3-20 days. If acceptable to us, we will ship (at our S/H expense within 2 work days) what we had agree to trade to you. Note: We do not want old TVs,VCRs, home systems, computers, monitors or peripherals or big, heavy items, and all items must be clean and safe to ship and handle. Again, don't ship us anything until you receive our written explicit approval to do so.
     (6) PAY EXACT FULL AMOUNT: Please pay the exact full amount of your purchase + S/H (email us if you are not sure). If you overpay us by more than 5% or $100 (whichever is less), allow 90-120 days for us to refund you the difference.
     (7) UNACCEPTABLE PAYMENT TYPES: No credit cards, debit cards, CODs, partial payments, postdated payments, "on approvals", direct bank transfers, gift cards, foreign currency, bitcoins (or any other form of virtual money), or any other types of payments or shipment not explicitly OKed herein or by us in writing prior to payment. Furthermore, we reserve the right to refuse any order, form of payment, or buyer-imposed sale or shipping conditions without liability to us. For our good buyers: We are more flexible in types of payments and shipping conditions. FOREIGN BUYERS: Some items may be restricted by government regulations for export, and Buyers assume all liability for the legality of our shipments to them and their purchases, possessions and uses of the items we ship to them.

NOTE: Prior to Paying for Your Order, be sure to first check and verify by email our stated availabilities, costs, and S/H. Due to a recently past staff shortage over last few years, we are trying to catch up. Availabilities: About 95% of Items listed as available are still available. Prices: About 50% of Items have changed prices, both up and down, depends on the Item. S/H: Increase all stated S/Hs by 25% (blame the shippers). Taxes: New Mexico and some other States, Counties and Cities (but not all) now levy an Online sales tax, which if due, we must collect (blame the politicians). Also, do not pay by PayPal without our prior, explicit and written OK (due to hacking attempts on our PP account; if we need to refund a PP payment for any reason, we charge the Buyer a 10% fee).

PRICING: We are flexible in our prices and S/H - especially for our good customers and for quantity and multi-item orders - we want to be fair to both you and us. Prices are stated below Item Description. We determined Item price based on prices of similar items found Online and in stores. In cases of no clear Online or store price consensus, other sources were used. If our price is too high for any item we sell, we will seriously consider reducing our price - especially if you document that others are selling this same or equivalent item at lower prices in the quantity you need - our goal is to beat our competitors! For many items, we are not limited to the quantities shown - should you need more and we have what you need available, we will seriously consider your offer. By buying an item in quantity and/or more than one item, you much reduce your S/H costs per unit. In most cases we can also do less quantity if your total order is $10+ (+S/H) and average price of your items is $5+ each. Just email us with your needs, your counter-offers, and/or items you want to trade.

SPECIAL DISCOUNTS: Until ___________, 20___, you may take _______% off of the price of any and all Items described on this webpage in which the word "Firm" does not appear next to the price.

SPECIAL QUANTITY DEALS SAVES YOU MONEY: Larger quantity (and multiple Item and local pickup and delivery) sales almost always result in per-unit $Item-plus-S/H savings for YOU! We have some Items in much larger quantities than offered above as usually stated in Item description. Yes, if we have the quantity to meet your higher quantity needs, we will seriously consider any reasonable and mutually fair offer you propose which will not only get you the quantity you need but at a substantial savings to you in per unit price and per unit S/H costs (quantity evenly divisible by 10 or 25). We will seriously consider underselling all other major sellers of the same items.

SHIPPING & HANDLING & COMBINED CHARGES: Where S/H is stated, it is stated for CONTINENTAL USA ORDERS. Shipping part of S/H is based on actual Shipping charges. For multiple Items shipped to you in the same package, we will COMBINE S/H CHARGES to save YOU money! So buy all of the Items you need from us now. Where S/H is not stated, the following S/H charges apply (NOTE: All purchases over $1,000, while prepaid, are available for pickup only, proper ID is required, and receiver must sign a receipt for all Items):

FOREIGN ORDERS: Please inquire. Minimum foreign Air Mail S/H is $14.90 Canada, and $22.90 all other foreign addresses, so please order as much as you can to save substantial foreign S/H.

MULTIPLE ITEMS SAVE YOU MUCH S/H CHARGES!: We are your perfect one-stop-shopping Super Store for high-tech parts to fill your parts lists! S/H is now expensive and shippers are constantly increasing their rates; to save YOU much in S/H, please order all that you need from us today from this webpage and all of our other webpages, pay for them all in full in one payment to be shipped all together to same address. ALL USA & CANADA ORDERS: You pay full S/H for your most S/H-costly Item plus half S/H for each and every other Item you buy. ALL OTHER FOREIGN ORDERS: Please inquire.

SHIPPING METHOD: For USA, we usually use Priority Mail or Media Mail (if book or manual) if Shipping charge is less than 75% of the S/H stated above. All foreign Shipping is by Air Mail. Other forms of USA shipping, including UPS, FedEx, Overnight, Second Day Air, Insured, etc. are usually OK but the S/H will be higher. We will not charge shipping to Buyer's shipper account.

ANTISTATIC PACKAGING: All Items which are electrostatically sensitive (e.g. CMOS, FET, MOSFET or otherwise known to be static electricity sensitive) are shipped in antistatic tubes, antistatic foam, antistatic reel tape, antistatic tray, and/or antistatic bag.

Thanks for visiting our ABQ Techzonics website. Best of successes. John Williams, M.S.E.E., Consumertronics.net

The ULTIMO EMF & ULTRASONIC SHIELDING MATERIALS
DIY SHIELD AGAINST MIND CONTROL, ELECTRONIC ATTACKS
LONE STAR CONSULTING, INC. (www.lonestarconsultinginc.com)

NOTE 1: We Will Not Ship this Item to a Foreign Address - USA Addresses Only
Note 2: You Must be PayPal Confirmed
Note 3: The Image Herein Shows One Use of the Many Possible Uses of These Shielding Materials - We Sell These Materials by the Square Foot as a Do-It-Yourself (DIY) Project - This Sale is NOT for the Helmet Shown in the Image
Note 4: Be Sure to Read This Entire Description Before Ordering - Once You Order These Materials We Cut Them from Larger Rolls, Which Means That We Cannot Resell Them, so
RETURNS AND REFUNDS ARE NOT ALLOWED - SOLD "AS IS"

New old stock (NOS). Sold by the square foot. The Ultimo EMF and Ultrasonic Shielding Materials, obtained from LONE STAR CONSULTING, INC. (www.lonestarconsultinginc.com/mindcontrol1.htm), the same types of raw materials used in their famous (or infamous) Shielded Helmet and Shielded Cap/Hat unique Customized Devices (CD) projects. If you require the Shielded Helmet, Shielded Cap/Hat to shield and protect your brain from mind control and electronic attacks, or anything else highly technical from Lone Star Consulting, Inc. (eg: energy devices, security/survival devices, medical/radionics devices, EMF/RF/microwave/light/sound devices) contact them directly. As policy, we can never recommend for or against any company, product or service other than techzonics.com and consumertronics.net.

If you are a Targeted Individual of mind control or electronic attacks, or just very sensitive to electromagnetic fields (EMFs) or ultrasonic signals, these materials will greatly attenuate both EMF signals and ultrasonic signals which would otherwise penetrate your unshielded skull or other body parts or equipment at full strength wreaking whatever damage they may cause you.

SOLD BY THE SQUARE FOOT. Consists of bottom layer, two internal layers, and top layer. You can order any number of square feet you need at one time, up to 10 square feet or whatever lesser amount we still have left to sell. These raw materials are for Do-It-Yourself (DIY) type people, and it requires significant effort, crafting skills, and spray cement (cement is not included, available from hardware stores) to properly assemble: You assemble the pieces yourself. Item comes with a User Manual which describes how Lone Star Consulting, Inc. assembles these materials for its CD projects. Typically, Lone Star Consulting, Inc.'s Shielded Helmet uses 4-5 square feet, and its Shielded Cap/Hat uses 1-2 square feet.

NEVER USE A CAP, BEANIE, SKULLCAP OR HELMET LINED ONLY WITH ALUMINUM FOIL! That's because aluminum foil molded round to fit your head acts as a parabolic dish, which reflects, focuses and concentrates microwaves back into your brain, which we believe greatly increases mind control and electronic attack potency. Plus, aluminum alone does not stop magnetic fields nor ultrasounds. For magnetic shielding, you need a ferromagnetic material. For ultrasonic shielding, you need a material which greatly shields against ultrasounds. The Ultimo EMF and Ultrasonic Shielding Materials are an optimum combination of materials which strongly shield against electric fields, magnetic fields, AND air ultrasounds of very wide bandwidths. Whatever little microwaves or ultrasounds that do get thru are highly attenuated, scattered and diffused by these materials so they should be of virtually no threat to you.

SHIELDING MATERIALS are critical to all who are interested in: Mind Control Attacks (MC), Neurological Weapons Attacks, Electronic Attacks, Electronic Harassment (EH), Electronic Implants (EI), Brain State Control / Brain State Monitoring, Brain Entrainment, Brainwashing, Brainwave Signatures, Mind Reading, Remote Neural Monitoring (RNM), Mind Probes, Behavioral Modification, Body Control, Brain Stimulation, Subliminal Mind Control Programming Technologies, Directed Energy Weapons Technologies, Microwave Attacks, Microwave Mind Control, Microwave Harassment, EMF attacks, EMF Mind Control, EMF Harassment, Ultrasonic Attacks, Ultrasonic Mind Control, Ultrasonic Harassment, Carrier Current Attacks, Scalar Wave Attacks, Circular Polarized Light Attacks, Fluorescent Lighting Attacks, Voice-to-Skull Technology (V2K, V2S), ELF Attacks, Remote Influencing, Implanted Thoughts, Implanted Fake Memories and Fake Commands, Manchurian Candidates, Electronic Gang Stalking, Unexplained Manifestations, Electronic Countermeasures, etc.

PLEASE ORDER TODAY ALL YOU NEED. Later availability is not certain. NOTE 1: We cannot ship these materials to foreign addresses. NOTE 2: Since we cut these materials to fit your order, we can't resell them, so, THESE MATERIALS ARE SOLD "AS IS" AND THERE IS NO RETURN OR REFUND. NOTE 3: S/H includes both Shipping and Handling charges. The Shipping part of S/H is the actual charge the shipper charges us. The Handling part of S/H is higher than our usual both because it takes us significant efforts to prepare your order for you, and because all shippers are distant from us (I am disabled, so I must pay someone to prepare and ship orders). NOTE 4: This sale is for the shielding materials only, and do not constitute any transfer from us to the Buyer (or to anyone else) any proprietary or intellectual property rights.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.

BUYER: Order by Title (below image) - Email us your order. - List History: LD188. - Price: $99.95 per square foot. S/H: $19.90 for first square foot, add $4.90 S/H for each additional square foot.

New Item. Have you ever tried to track down low, fleeting, distant and/or faint sounds, but frustratingly not being able to hear them well enough or react fast enough to catch them or to determine their locations or identities? Or hired expensive "surveillance experts," "bug-sweepers" or "ghost busters" with same zero results or a bunch of BS? Do you already have an alarm system, but it sounds so softly and/or briefly that you can miss it - especially when you are distracted, asleep or even a short distance from the alarm? The HSA works by using a highly-directional microphone, super-amplification circuitry, a fast latching circuit (reacts in milliseconds to catch even the briefest sounds), both a LED and loud beeping alarms (which comes with a volume control and can be switched off for a silent alarm / secret alarm LED-only alarm indication instead) to detect and continuously alert you to low, fleeting, distant and faint sounds in the mike's pointing direction at and within the sound band the HSA is tuned for (if you specified an HSA band).
           HSA DETECTS CRITICAL LOW-VOLUME, SHORT DURATION BEEPS FROM OTHER ALARM SYSTEMS: Are you missing sounds from alarms or alerts which are so weak and/or short duration that you are distracted or sleep through them? Bothered by strange sounds / weird sounds which seem to come at random or odd times, especially while you are asleep? Unfortunately, many critical alarm systems put out a few faint beeps and then shut off - critical beeps you can easily miss because you are soundly asleep, temporarily out of the area or distracted by other noises and activities. The HSA is designed to detect such faint and short-duration sounds and continuously put out a loud alarm until you shut it off, it times out (if you set it for a time duration) or its battery depletes (if you specified battery operation). To remotely monitor the HSA, you can use a baby alarm with it (baby alarm is not included with the HSA unless explicitly contracted for). We believe that for all critical sounds, as many people as possible who consider that sound to be important should be able to monitor it. However, baby alarms are NOT substitutes for the HSA because baby alarms themselves neither detect low-level and short-duration sounds nor do they lock onto any sound. And unlike the HSA, baby alarms are not highly directional (they also pick much unrelated ambient noises such as traffic, neighbors, equipment, animals, etc.). This means that if you try to use a baby alarm to substitute for the HSA, and you are even briefly distracted or step out of the baby alarm receiver area, or you sleep deeply, or the faint short-duration sound is masked by a louder sound picked up by the typical omnidirectional baby monitor mike, you will likely miss the critical low-volume and/or short-duration critical sound. Also, if the source of the sound or the sound itself you are trying to monitor is expected to soon change but the new sound is also expected to be low-volume and/or short-duration, or there are other faint short-duration sounds you are also interested in, know that the very versatile HSA does a great job detecting and alarming to all types of low-volume and short-duration sounds - the HSA has countless low-volume, short-duration sound uses.
           THE HSA IS VIRTUALLY IDEAL BUSINESS AND HOME INVASION ALARMS: The HSA, especially the Entire Audio Band (20 Hz - 20 KHz) and the All-Band Audio Plus Ultrasonic (20 Hz - 80 KHz) versions, is a far better preventer of and home alarm system / business alarm system for burglaries and home invasions than traditional home alarm systems / business alarm systems because while traditional business / home alarm systems don't typically activate until the criminal has already damaged or invaded or is in the process of damaging or invading your property, the HSA (with the HSA inside your home or business) can alarm you even if the criminal or feral animal is just milling around the outside of your home, business, or nearby car or other property. As the result, traditional alarms can activate too late to save you, your loved ones or property. The HSA is also great against criminals casing your home or business, snoops, peeping toms, knob-turners, lay-and-wait ambushers, home-invading creeps, vandals, snatch-and-grab thieves, gas thieves, and unwanted door-to-door solicitors - its silent alarm / secret alarm feature can quietly alert you to a current or recent invader or snoop without also alerting the invader or snoop. And as part of a baby monitor, home watch, business watch and nanny watch system. When you or your kids come home to an empty house, is your home really empty? One of the most vulnerable parts of people's homes is their garage - an HSA in your garage can alarm you if someone is trying to break into your garage or has enterred through an open garage door. Basements are also vulnerable to home invaders, burglars, murderers and rapists. We all live in an increasingly dangerous world, increased security is now a must.
           HSA DETECTS DISTANT & REMOTE SOUNDS: The HSA is also highly recommended for detecting and listening to remote and distant sounds, and may be a real lifesaver in finding lost children and animals. Also great for bird watchers and other animal researchers, for trackers, for hunters, and for military and police uses. With the HSA, you can detect and hear people and animals at much greater distances and long before they can hear you - giving you great advantages in many situations.
           HSA DETECTS FAINT SOUNDS FROM COLLAPSES, CAVE-INS, AVALANCHES, EARTHQUAKES, TSUNAMIS, WAR ZONES, MINING ACCIDENTS, TERRORIST ATTACKS: The HSA can also be highly effective for detecting people trapped in cave-ins and collapsed mines, buildings, bridges, tunnels, ditches, wells, avalanches, landslides, etc., and is highly recommended for people living in active earthquake zones, mining areas, avalanche areas, tsunami areas, war zones, and terrorist target areas. If someone is trapped or buried, you want the HSA to be right on hand to immediately search for them by detecting their movements, shouts, cries and digging in the rubble. You also want to detect hidden broken gas lines and broken water lines. Highly directional and ultra sensitive, so you don't need to be near or right over the source of the sounds.
           HSA DETECTS WATER LEAKS, AIR LEAKS, GAS LEAKS, FUEL LEAKS, CHEMICAL LEAKS: Water leaks can be devastating to your property, not to mention seriously drive up your water bills and waste valuable drinking water. Need to detect water leaks or overflows in your buried plumbing, walls, ceilings and floors, and through soil, concrete slabs, asphalt, wallboard, ceiling tiles, floor tiles, carpets, wood, plastic and other materials? The HSA can be used to non-destructively pinpoint the locations of underground water leaks and ceiling, floor and wall water leaks (water lines, sprinkler systems, faucets and other valves, hydrants, swimming pools and water tanks). Water leaking under pressure usually makes spurting, spraying, gurgling or PSSS-type sounds, such low-intensity buried sounds usually cannot be heard by the naked ear - especially when your ears are 5+ feet off the ground, which the HSA serves as an excellent hydrophone. Air leaks, gas leaks, fuel leaks and chemical leaks can make similar faint but distinctive sounds which the HSA can also detect. Many plumbers and equipment rental places do not have leak pinpointing devices, and plumbers which do virtually never rent them out, and charge you $200 - $300 EACH TIME they use them on your property (some double the price if they find a leak and you do not hire them to make the repairs). If you can't pinpoint your leak in a yard line, building line or valve, you may be forced to replace the entire line at huge expense, not to mention the extra expense of removing the debris from the torn up area, repairing it, and suffering a loss on your property because it now will likely be heavily scarred due to replacing the entire line. However, if the HSA can pinpoint your leak, you can usually restrict your repairs just to that small area at much less cost and damage. For leak detection, contract for The Entire Audio Band Version of the HSA with the Delux Water Leak Detection Mike. The Delux Water Leak Detection Mike is a mike consisting of a long padded cone (to concentrate leak sounds) attached to a three-foot plastic tube handle - an electronic stethoscope. You place the cone on the surface in various places as you walk along the line's route, and listen for distinctive leak sounds, where the sounds are loudest usually indicates exact location of leak. The Delux Water Leak Detection Mike also works great as a long distance surveillance mike, but is not sold for that purpose. In addition, also consider getting the Long-Reach Mike, which is a mike in a five-foot thin plastic tube handle which can reach deep into small spaces and pipes, and which usually much enhances received leak sounds when inserted into a steel pipe driven into the ground near the leak.
               Note that another very effective way to detect and locate water leaks is by using the soil conductivity method of our less expensive Ultimo Water Leak Detector & Locator, described on our misc-electronics.htm webpage, and pinpointing water leaks by detecting dips in soil resistance due to the water leak wetting the soil (not effective for air leaks, gas leaks, fuel leaks or chemical leaks, or water not leaking into soil). Since soil and water leak conditions vary widely, and one may work better than the other to detect your water leaks, you ideally should have both the HSA and the UWLD&L on hand to detect water leaks.
           Note 1: Since we do not have control over your soil and leak conditions (both of which can be highly variable and complex situations) nor how you will use this device, we cannot guarantee the HSA will pinpoint your water leaks, and we assume no liability for false positives, false negatives, locating or failure to locate a water leak that caused or will cause damages, failure to identify the exact location of a water leak, or for anything else related to your use or abuse of the HSA device or your leak problems. Also, the HSA detects only water leaks (not tested or approved for non-water leaks) that wets soil. Also, we are not licensed plumbers, so we don't provide plumbing services, claims, advice or opinions.
           Note 2: The HSA is sold and intended strictly for personal use only and under our consumertronics.net policies. The HSA is not sold nor intended for business use, for commercial use, for institutional use, for governmental use, nor for any other type of group use.
           HSA HAS MANY OTHER IMPORTANT USES: Hearing sounds or voices in your head or your thoughts being repeated back to you which are not caused by a medical condition and appear to be emanating from external sources you can't seem to pinpoint or seem to be impossible sources of sound? Plagued by sounds no one else can hear or directed towards you alone? Or by weird sounds, voices or other disturbances which emanate from underground, walls, attic, basement, crawl space, garage, shed, bedroom, other room, large appliances, vehicles and/or equipment? Great for car owners and auto mechanics to ferret out those strange vehicle vibrations, squeaks, rattles and buzzes. Or underground streams or other liquid flows? Or as part of a baby monitor or nanny watch system. Or infestations of insects or rodents busily eating or nesting behind your walls, attic, floor, basement or other hidden places? Or as an electronic geophone / seismic activity detector. Or are you into ghost-busting, spirit hunting, space alien hunting, or animal detection or research (e.g. bird watching, hunting, bats, dolphins, whales, burrowing animals, mice, rats, termites, ants, etc.)? The HSA can be used in all of these other applications as well.
           HSA FEATURES: The HSA is simple and easy to operate and comes with the HSA Module, the Hypersensitive Mike, the buzzer sounder, quality headphones, AC power adapter (for AC power operation), two new 9VDC alkaline batteries (portable DC operation), cabling, and user manual. The HSA Module comes with a Sensitivity Pot so that you can set the sensitivity (i.e. input gain) from high sensitivity to ultra high sensitivity, a Duration Pot to set the duration of the alarm signal, and an output Alarm Volume Pot to control alarm loudness. In addition to a powerful beeper, the HSA also has a LED which also lights when the alarm is activated, even if you disconnect the beeper for silent indication. The HSA also comes with an output port where you can listen to and/or record the filtered highly-amplified sound (if in the audio band) and/or view the detected signal on an oscilloscope. If you need remote monitoring (e.g. the people doing the monitoring are in a different area or office than the HSA), you can easily use the HSA in conjunction with a wireless baby monitor, home watch / home alarm system, internet monitoring system / internet surveillance system, real time spy camera, or some other applicable legal transmitter/receiver system (the HSA neither includes any of these extra systems, nor interfaces to them, nor any recorder, oscilloscope, spectrum analyzer, etc.).
           The HSA has two modalities of operation: (1) Feedback Modality, and (2) Non-Feedback Modality. In the Feedback Modality, the alarm signal is also fed back into the sound detection circuitry, which continuously retriggers the alarm until you shut off power to it. In the Non-Feedback Modality, the alarm signal is not fed back, in which case, the alarm activates for periods primarily set by the Duration Pot.
           The highly-directional mike is almost always required to determine actual sound directions - often critically important to determining sound origins with minimal false alarms, and thus determining what or who is making the sounds. By also selecting the band where your sounds of interest lay in, you can also greatly minimize false alarms by isolating your specific sounds of interest - especially useful where and when they are buried in much ambient noise and/or are remote or distant.
           If ultrasonics is important to you, we also do ultrasonic HSA device types. Don't be fooled by similar devices which can't perform above 40 KHz. We also offer HSA infrasonic versions (i.e. sounds below 20 Hz), but because infrasound is spread out and infrasound direction is usually not detectable using electronic detectors, the mike provided is built-in and much more omnidirectional.
           Note that for all critical uses of the very versatile HSA, be sure to repeatedly test it in non-critical situations as similar as possible to your actual critical use, and then use the HSA as a backup system to any existing system you may have to alert you. Most important are the, (1) Adjustment for input sound amplification (multiturn Sensitivity Pot) to maximize true positive indications while minimizing false indications, (2) Pointing of the directional mike so that you maximize sensitivity in the direction that the sound of interest comes from, and (3) Setting of the output sound level so that you will be reliably alerted while not disturbing others not wanting to be disturbed. As with all of our devices, we are not licensed medical personnel, so we never make medical claims or provide medical advice or medical opinion.
           The HSA is the absolute ultimate in low and short-duration sound detection capabilities! Should detecting low and short duration, remote, distant or faint sounds (audio, ultrasonic and/or infrasonic sounds) and alarming you when detected is what you require, the HSA is ideal for you! Was $395 [2 lb] for the Bass Version (20 - 500 Hz), Midrange Version (500 Hz - 4 KHz) and Treble Version (4 - 20 KHz), $545 [2 lb] for the Ultrasonic Version (20 - 80KHz), $695 [2 lb] for Near Infrasound Band Version (2 - 20 Hz, built-in omnidirectional mike), $895 [2 lb] for Far Infrasound Band Version (0.2 - 2 Hz, built-in omnidirectional mike), $595 [2 lb] for the Entire Audio Band Version (20 Hz - 20 KHz - recommended for maximum versatility and where you are not certain which band the sound mostly lies in or if the sound covers multiple audio bands (i.e. wideband audio sound)), $995 [3 lb] for the All-Band Audio Plus Ultrasonic Version (20 Hz - 80 KHz, with major band-selection switch - recommended for both wideband audio sound and mind control and electronic attacks, ultrasonic communications, and animal detection and research where the animal produces or responds to ultrasonic signals), and $795 [2-3 lb] for any other audio and/or ultrasonic band version you specify (each specified band must be between 1% and 25% of upper frequency in width and be at least 500 Hz wide, and must entirely reside between 20 Hz and 200 KHz; add $95 more for each band you specify above first band; 4 bands max; bands may overlap and you may have gaps between your selected bands). Both the plug-in mikes and plug-in alarm sounders have 4-foot cables (flexible, lightweight, high-quality coaxial cables). While the provided mike is highly directional, we can substitute this mike for a more omnidirectional mike (same cost; covers a much greater area but is not nearly as directional), and we can provide additional mikes (e.g. more omnidirectional mike along with the usual highly-directional mike), $95 [1 lb] per mike extra for all mikes, except the Delux Water Leak Detection Mike, which is $195 extra [3 lb]. While the alarm sounder is rated at 70-80 db, we can substitute it for an even much louder 90-110 db alarm sounder ($45 extra), or provide the 90-110 db alarm sounder as an extra sounder ($75 [1 lb] extra) (as with all alarm sounders, take cautions to not disturb your neighbors and others without their permissions, and place and tune the HSA system to minimize false alarms). Since you can control volume to the alarm sounder, you can also set the volume to either type of alarm sounder to very low if you wish for a much more localized alarming.

BUYER: Order by Title (below image) - Email us your order. - List History: LD122 (see prices above), SH: $11.90.

New! Are your home/business wiring, piping, etc. or even car wiring hijacked to electronically harass or surveil you by hitchhiking signals onto them? Because power and telephone lines, and metal pipe (e.g. plumbing), metal tubing (e.g. wire shielding) and metal linear structures (e.g. rebar, girders, conduit, trim, rails, fencing) surround you virtually everywhere you go in any building, electronic surveillance devices, equipment control devices, mind control devices and electronic attack devices can be connected to them in virtually every room and even outside the building for some distances - these omnipresent conductors serve as the optimum means to connect up, transmit and distribute these very harmful electronic surveillance, mind control and electronic attack signals throughout the building (sometimes mistakenly called, "carrier current" attacks) - optimum conductors for virtually endless varieties of bugs, taps, harassment, control and line blaster devices. Our WHHE devices both test and filter out harmful hitchhiking signals!
       Since these conductors are so prevalent in virtually every building, added with the technologies of time multiplexing signals and frequency multiplexing signals, literally dozens - even 100s - of these types of very harmful signals can be operational on any day and night against you - usually no matter what rooms you are in. Your home or business is just several huge signal distribution networks plus transmitting and receiving antenna arrays. And all such wiring, piping, etc. can usually be just as easily abused for electronic surveillance, mind control and electronic attacks even if you turn OFF or disconnect them from their normal uses (e.g. turning Off AC power, disconnecting phones). This is nothing new - both power and phone wiring have been lawfully used for decades to carry high-band voice, control signals, and data (e.g. faxes, modems, DSL, zons, intercoms, alarm systems for phone lines, and intercoms and alarm systems for power lines) - proven technologies using common household AC wiring and phone wiring. Furthermore, because generic power and phone wiring and piping in all or part of one's home and business are often unshielded, they can be both easily accessed and connected up to AND used as a huge transmitting and/or receiving radio antennas to communicate with anything from electronic implants - to guys parked in the street - to cellphone towers down the road - to control centers 100s miles away - to ships at sea - to satellites - to electronically harass, control and/or interfere with your life! For examples: (1) Signals on them can be transmitted wireless for miles, and (2) Physical access to the wiring, piping, etc. is not even required; because the wiring, piping, etc. is unshielded, signals can often be inductively coupled into or out of power lines, phone lines, piping, etc. (e.g. inductively-coupled phone line taps are decades old technology).
       Since these virtually endless varieties of bugs, taps, harassment, control and line blaster devices can take on virtually any appearance and/or be hidden in just about anything inside of or near your building, they can be very difficult to detect through physical searches (short of tearing down all of your walls and ceilings where the lines and piping run, and disassembling all of your equipment). For example, these devices can be easily concealed inside TVs, radios, computers, landline phone equipment, etc. - fully operating even when the TV, radio, phone, etc. itself is not turned ON. Or hidden in an outlet, inside of your wall or in your attic - even inside your car. Since not all of these harmful devices are RF devices, the non-RF ones cannot be detected using TSCM field strength testing used for wireless systems. Nor can strictly receiving devices be TSCM-detected. And usually nor can transmitting devices which transmit in bursts, randomly or pre-dawn hours, nor when the perpetrator believes the area is being electronically swept and turns Off the transmitters until the TSCM crew leaves. In short, your phone and power wiring, piping, etc. can be easily and secretly tapped into using hardwired or inductive-coupling techniques just about any place they are routed internal or external to your home/business. To understand just how frustrating it is even for experts to really troubleshoot an area, rent the Gene Hackman movie, "The Conversation" - and that was early 1970s relatively crude, clunky and huge electronic surveillance systems!
       The high-band signal frequencies used on power and phone lines, piping, etc. (which can be time multiplexed and/or frequency multiplexed to support several such systems) are usually 5+ times higher than the standard 60 Hz / 50 Hz (power wiring) or 3200 Hz maximum (phone wiring) bandwidth normally used on them. The usable bandwidth of many power and phone lines exceed 2 MHz for loops up to about 6,000 ft (1.14 miles) and much higher over much shorter loops - very usable for electronic surveillance, mind control and electronic attack. Metal piping, tubing and structures can conduct signals far higher in frequency than even power and phone lines (because most power and phone lines, pipes, etc. are unshielded, electrically noisy and inductive and leaky to high freqs, most high-band signals are under 200 KHz and high in volume level). Loading these unshielded conductors with all kinds of multiplexed and high-band signals they were not designed for may cause the wiring, piping, etc. itself and their terminations to resonate with strange sounds and noises which seem to emanate from walls and ceilings often on quasi-random and directional bases (e.g. strange sounds you can hear when standing in one position but not in another position, and/or at some times and not at other times, and/or during certain conditions of humidity and/or temperature but not at other conditions), often throughout most of a building, and often similar to the vibrating and humming of an old or defective power transformer. They can also vibrate and hum in the ultrasonic and infrasonic bandwidths when signals mix and produce sum and difference frequency components. The weird sounds can also sound like a distant motor running, distant voices, whispering and mumbling, spiritual and God-like voices, high-pitched voices, low-pitched voices, chattering, music, animal sounds, whistles, echoes, pulsing, pounding, popping, finger-snapping, digital data sounds, zinging sounds, whooshing sounds, theremin sounds, etc, especially when real time complex signal mixings of possibly several signals at once result in partially demodulated and/or multiply-mixed high-band signals. These weird noises can literally drive some people nuts! If you are hearing sounds, noises or even voices or Morse-code sounding digital data signals or control signals coming from your walls, ceilings or appliances or inappropriately while you are on the phone, you may not be imagining it. Also, high frequencies imposed on power wiring can adversely affect induction motors (especially compressor motors common to refrigerators, freezers and air conditioners), causing them to operate roughly, chatter noisily and possibly stall out (because induction motor speed is proportional to the frequency of its power source, multiple frequencies can harm them), and can cause lights to unusually brighten or flicker. Modulated high frequencies on phone lines can cause malfunction of phone and computer equipment (e.g. loss of broadband sync, inability or slowdown in using DSL or even dial-up, faxes, zons, etc. because of a "noisy line").
       The WHHE1 is designed to plug directly into any 120 VAC wall outlet (3-wire or 2-wire, 60 Hz or 50 Hz) located virtually anywhere to both detect and eliminate these higher frequencies on your AC power wiring (and to also cause an improvement in your power factor if it is typically inductive or lagging power factor (PF)) (Note: If you have an intercom, digital or other communications system which uses home/business electric power wiring to transmit/receive signals, the WHHE1 will also filter out those signals if used at same time). For example, voice, data signals, and/or control signals at 10 KHz, 50 KHz, 90 KHz,.., 1890 KHz, 1930 KHz and 1970 KHz could all be frequency multiplexed onto a single 60 Hz power line simultaneously. That is, as long as a WHHE1 is not connected, because the WHHE1 wipes out all frequencies much above 60 Hz - wiping out those electronic attack and electronic surveillance high-band signals in one fell swoop! You may specify the WHHE1 to be non-battery powered (used only on powered AC lines to also power it), or battery-powered (used on both powered and unpowered AC lines). Note that the WHHE1's filtering functions cannot be duplicated using commercial power strips with built-in transient suppression. Power strips with transient suppression only filter out transients which are both high-voltage AND high-frequency, and then only for those devices connected to the power strip - not the VAC power lines connected to your AC outlets and located behind your walls in your home or business. Only the WHHE1 can filter out unwanted signals at your outlets and home/business wiring (as well as devices plugged into power strips). Even for devices plugged into transient-protected power strips, the designed protection is for transients which are both high-voltage AND high-frequency - much less effective against hitchhiking voice, control and data signals (which usually result in small RMS voltage level increases way below voltage levels required to switch in transient suppression).
       The WHHE2 is designed to plug directly into any normal landline phone line in the building, and works whether the phone is On Hook or Off Hook to eliminate higher frequencies on your phone wiring (Note: If you use DSL, modem or other digital phone line communications system, those signals will also be filtered out if used at same time). We offer 3 versions of the WHHE2: (1) WHHE2-HB: The High-Band (HB) version (the default version if you don't specify) filters out phone line freqs starting at about 4000 Hz and above. While the HB will filter out all signals at all times when toggled ON much above the normal phone voice BW of 300-3200 Hz, it will not filter out normal speech signals in the voice BW, resulting in possible but very unlikely unauthorized voice-band transmissions when phone is on-hook. (2) WHHE2-LB: The Low-Band (LB) version filters out phone line freqs starting at about 50 Hz and above. While the LB filters out voice and data signals at all times when toggled ON, it must be turned OFF when you need to talk on the phone or use it to transmit data or it will also filter out your and the other party's voices. Note that the LB version may negatively impact ring with some phones. (3) WHEE2-CMP: The Composite (CMP) version allows you to toggle between the HB and LB versions for maximum security - when you are talking on the phone, you set it at HB, when you are sending data online, you turn OFF both HB and LB, and when phone is on-hook, you set it at LB. The WHHE2 uses the common standard RJ-11 phone connector. The WHH2 always comes battery-powered.
       The WHHE3 is designed for 12VDC battery systems (e.g. vehicle battery wiring) because car battery wiring can also be - some say often - used to conduct unwanted and harmful signals which can be used for electronic surveillance, mind control and electronic attack. You can specify whether you want its cable to have cigarette lighter, battery clamp or other type of terminating connector you specify (Note: Any and all vehicle underhood connection work must be done by your automechanic at your expense and always in a legal and safe manner, and we assume no liability for the installation, removal and use of a WHHE3 device on any vehicle). You may specify the WHHE3 to be non-battery powered (used only on powered 12VDC lines to also power it), or battery-powered (used on both powered and unpowered 12VDC lines).
       The WHHE4 is designed to test in their entirety or sections of unpowered wiring, metal piping, metal tubing, metal fencing, metal structures, and other unpowered conductors up to about 25 feet long, and to filter out all signal types they may be carrying above 60 Hz. The WHHE4 can test and filter out great varieties of conductors which do or do not have known or accessible signal return paths (WHHE1, WHHE2 and WHHE3 test and protect circuits which have electrical return paths paired with them, e.g. AC power line neutral, phone Ring wire, car battery ground). The WHHE4 comes with two cables, each about 12.5 feet long, and each terminated by alligator clips (or some other type of connector you specify). One cable is connected to the unpowered metal wiring, piping, tubing, fencing, structure, etc. If this metal is accompanied by an accessible metal electrical return path (e.g. wire, piping, tubing, fencing, structure, etc.), the other cable is connected to it, else other cable is connected to grounded metal, in which case an earth ground rod may be required (earth ground rod not provided, available in hardware stores). The WHH4 always comes battery-powered. Note: Not all plumbing or tubing (or fencing or structures) is continuous metal all the way into a good earth ground. Sometimes plastic plumbing is used, which breaks any ground connection. Even if the plumbing pipe is continuous metal all the way to where buried in earth, pipe joints can be corroded enough or use enough teflon tape to break the electrical connection, the pipe can be laid in dry ground or concrete, and/or the pipe itself can be corroded enough to break its ground connection. In fact, plumbing pipe is never a reliable earth ground. National Electrical Code: 'True earth ground physically consists of a conductive rod or pipe driven into the earth to a minimum depth of 8 feet.' Plumbing pipe is never "driven into the earth" and plumbing, tubing, fencing and structures are seldom buried at least 8 feet deep. If unpowered metal is not itself solidly grounded to earth (easily determined) - not just wet-season or intermittently grounded - it makes a great conductor for electronic signals.
       The WHHE devices come with a signal indicator LED and the DETECT/PROTECT toggle switch. One toggled position is the DETECT Mode in which the LED will flicker and/or brighten if there is a high-band signal on the line, piping, etc. The other toggled position is the PROTECT Mode which will filter out all types of high-band signals, transients and line noise interference hitchhiking signals to remove them from your line, piping, etc. The DETECT Mode continuously tests your conductor to determine if there is any unusual signal or other electrical activity on it. The toggle switch is especially protected with a snubber circuit designed to prevent contact arcing during switches. If the WHHE device conflicts with some other known and OK equipment or function connected to your wiring in the PROTECT Mode, then don't operate that WHHE in its PROTECT Mode when using such equipment or function (no known interferences in the DETECT Mode).
       Plus WHHE devices are designed to further protect your lines from possibly destructive high-voltage pulses, transients and line noise which can sometimes also occur, whether natural or manmade (e.g. helps protect you from a perpetrator trying to wreck your phone or power system - even your computer - using a phone or power line blaster to deliver high-voltage transients, pulses and electrical noise to your system and equipment; and helps protect lines and equipment against damage caused by nearby lightning strike or transients, pulses and line noise). (Note that while electronic filters may eliminate 99.9+% of a signal - so much of the signal that the tiny remaining signal is lost in the line noise - no electronic filter wipes out absolutely 100% of a signal; always experiment with WHHE device first to make sure that it does not interfere with the normal use of your lines and equipment.). This very substantial added transient protection includes a gas discharge lightning arrestor (surge arrestor - not normally found even in expensive transient-suppressed power strips), a MOV (varistor), and the filter capacitor itself - all of which adds substantial protection from lightning strikes, line blasters, and powerful pulsed mind control and electronic attack devices hitchhiked onto your lines, piping, etc.
         Plus WHHE devices come with an output connector which permits you to directly view hitchhiking signals on an oscilloscope or hear them on a speaker or earphones (if signal is in the audio band; oscilloscope, speaker and earphones are not included). By being able to observe and/or hear the signals which should not be on your line, piping, etc, you can often tell exactly what is being communicated or controlled, and correlate the hitchhiking signals with conversations, other activities, and unexplained manifestations.
       Note that since most home and office electric power systems are 220-240 VAC and standard outlet wiring is 110-120 VAC, there are two isolated AC power "legs" that power the various 110-120 VAC outlets and functions throughout the building. Therefore, to simultaneously and continuously DETECT and PROTECT both AC power legs, you need two WHHE1 devices. Also note that if your landline phone system has more than one phone line, each phone line is isolated from each other, so therefore to simultaneously and continuously DETECT and PROTECT all phone lines, you need a WHHE2 for each and every phone line. All WHHE device-types are small, portable, easy to use, uses standard connectors, and the WHHE2 and WHHE4 are 9VDC battery-powered (WHHE1 and WHHE3 operate off of their power line voltages but we can also make them to operate off of 9VDC battery to also test unpowered 120VAC power lines (WHHE1) and car battery wiring (WHHE3)). CAUTION: Do not use any WHHE device in the PROTECT Mode to do a denial-of-service attack against anyone legitimately using a phone system or power line for some normal high-band activity, for example, by interfering with or defeating DSL, modems, faxes, zons, intercoms, alarm systems, etc.
           NOTE: This device-type was handmade and hand-tooled in limited quantity using several different box types and circuitry, but all have the same functions and features as described above. Therefore, the device you receive may differ in appearance from the one in the image above. Lid to device box may be shown temporarily opened or removed for better view of internal circuitry. Please allow 3 weeks for delivery.

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141.
       Non battery-powered WHHE1, WHHE3, Price: $395 each, S/H: $12.90
       Battery-powered WHHE1, WHHE2-HB, WHHE2-LB, WHHE3, Price: $445 each, S/H: $12.90
       Battery-powered WHHE2-CMP, WHHE4, Price: $495, S/H: $15.90

New! If you are being electronically attacked, electronically harassed, electronically controlled, electronically tracked, and/or electronically surveilled through some wireless means, the signal is either electromagnetic (EM) or ultrasonic (see below) in nature. There are all kinds of commercial EM scanners which will allow you to scan for the presence of EM signals. However, they almost never come with directional antennas (they usually have only an omnidirectional whip antenna) so that while using the whip antenna you can pick up EM signals and display the strongest EM signal coming to you from any direction, they cannot determine signal direction - only signal frequency and signal strength. Furthermore, since the standard whip antennas used in commercial scanners detect signals from all directions, a stronger EM signal(s) with a nearby center frequency(ies) (e.g. licensed ham and/or commercial radio stations and/or TV stations) to an electronic attack signal will cause the scanner with the standard whip antenna to detect it/them instead of the offending signal. However, because our UEMTDF comes with our proprietary highly directional antennas, when pointed in the offending signal's direction, often result in the clear detection and direction finding of offending signals - even when more powerful non-malevolent (e.g. licensed commercial stations, ham, cb) transmitters are operating in the same area, at the same time and at nearby frequencies. This is critical because electronic attack transmitters are often designed to operate in the "electronic shadows" of stronger legit signals, such as commercial TV stations and radio stations, to electronically hide them from scanner/whip antenna detection. Furthermore, commercial scanners come with no instructions on how to interpret the received signals in the realm of electronic attack, mind control and body control technologies. Because of the variety of directional antennas that we include and our User Manual insights about their uses, the UEMTDF can be used to detect and determine the direction of not only relatively distant external signals, but also nearby and even internal signals transmitted, for example, from an electronic implant(s) (for modern electronic implants and most other localized transmitters, it is usually very helpful to be able to detect both internal signals and external signals because modern electronic implants, room bugs, vehicle tracking transmitters, possibly telecoils/magnetic induction loop systems, etc. are often in two-way communications with much larger external transceivers which control them; electronic implant control is often based on the received biomedical data supplied by the electronic implants - data which is often biological result of previous control signal instructions from the external transceivers often in a closed-loop feedback type system). Other nearby signals the UEMTDF is designed to both detect and find include room bugs and tracking transmitters often concealed on vehicles, clothes and portable objects. The UEMTDF comes with a commercial scanner of our choice based on the description of your needs, plus 5 unique directional antennas of our design, plus description of both how to use the directional antennas and how to interpret as best we know the detected radio signals, including "radio static" that is often missed even by professional bug sweepers (detection is contingent upon the existence of a transmitter transmitting an adequate RF signal at the same time and direction you are trying to detect it). NOTE: We will refund 25% of your payment for this device-type if within 60 days of you contracting for one you also contract for a PERSONAL EMF JAMMER (PEMFJ)-type device because you need a highly directional RF signal detector to try to ascertain the frequency, direction and timing of the harassing or attacking EMF so that we can optimally design the PEMFJ for you, and also so that you can prove to yourself that your PEMFJ is transmitting radio signals.
NOTE: This device-type was handmade and hand-tooled in limited quantity using several different box types and circuitry, but all have the same functions and features as described above. Therefore, the device you receive may differ in appearance from the one in the image above (image missing at this time). Lid to device box may be shown temporarily opened or removed for better view of internal circuitry. Please allow 3 weeks for delivery.

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $1195, S/H: $17.90

New! A device type sometimes referred to by others as unknown presence detectors, unseen presence detectors, spirit detectors, ghost detectors, ghost busters, alien detectors, and alien buster detectors. Yet another one of our all time most exciting and incredible devices! Concerned about nearby hidden people (e.g. rapists, muggers, home invaders, stalkers, peeping-toms) or animals, or spirits or ghosts which can disturb the ambient static electric field and/or the electromagnetic field? Detect them with the U&UED! The U&UED is an ultra-sensitive device which will detect the presence or nearness of virtually anything which produces or disturbs this omnipresent Static Field (U&UED1) or Electromagnetic Field (U&UED2) (the U&UED-Combo is both a U&UED1 and U&UED2 combined in the same box using the same power supply). Static field and electromagnetic field disturbances are not normally detectable with the human senses alone (some animals are very sensitive to these electric field disturbances). Worried that someone is hiding in your home, business or vehicle? Or some feral animal is laying in wait to surprise and attack you? The U&UED may help to detect and warn you! With Sensitivity Adjustment to boost dynamic range. (NOTE #1: We do NOT claim that ghosts and spirits actually exist; our designs are based on our proprietary theories should they exist. NOTE #2: Works best under dry conditions, the environment should be less than 50% Relative Humidity because high humidity adversely affects disturbances in electrostatic fields; and avoid using the U&UED near large metal surfaces, large bodies of water and AC power and radio emitters and other manmade strong electrical disturbances as proximity to these entities may cause this device type to not properly function). The U&UEDs are the same types of devices used by paranormal researchers, UFO and alien researchers, and "ghost busters."
NOTE: This device-type was handmade and hand-tooled in limited quantity using several different box types and circuitry, but all have the same functions and features as described above. Therefore, the device you receive may differ in appearance from the one in the image above. Lid to device box may be shown temporarily opened or removed for better view of internal circuitry. Please allow 3 weeks for delivery.

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $695 each, $1285 combined into one box (U&UED-Combo), S/H: $15.90

New! Thousands of people have been struck by lightning - many killed or seriously injured or disfigured. You can be struck by lightning even though it is not raining - even though there is not a cloud in the sky overhead! Lightning is sudden, deadly and devastating. Lightning also kills animals, causes fires, disrupts electricity and destroys sensitive equipment like computers, CDs, TVs, DVDs, VCRs, phones, modems, et al. You can even be struck and instantly killed, injured or disfigured by lightning inside your home or office, for example, if your building is struck while you are using the bathroom, the kitchen sink or even on the phone! While many people have temperature, air pressure and humidity detectors in their homes and offices, virtually none have a lightning risk detector - even in areas that receive 1,000s of strikes per year! Lightning indiscriminately kills - it doesn't care if you are rich or poor, black or white, male or female, young or old! And most people can't sense just how much endanger they are exposed to from lightning strike until it is too late! With the SLRD, you can get a handle on the level of lightning danger in your immediate area, and whether your danger is increasing or decreasing from usually unfelt changes that occur in the ambient static electric field. And you can set an audio and/or visual alarm, based on the detected risk of lightning strike, to let you know when YOUR risk level is too high for YOUR comfort level. Quit living life like it is a crap shoot! Especially if you live or travel in a high-lightning area, you absolutely MUST buy the SLRD! (NOTE: We do NOT claim that the SLRD will detect every occurrence of a lightning strike near you before it occurs as lightning is a very complex and varied phenomenon and in some cases the increase in risk of a lightning strike can occur rapidly; the SLRD is designed to detect changes in the static electric field near you and indicates, for example, that the voltage difference between your head and your feet area indicate that your body could conduct a potentially deadly electric current.)
NOTE: This device-type was handmade and hand-tooled in limited quantity using several different box types and circuitry, but all have the same functions and features as described above. Therefore, the device you receive may differ in appearance from the one in the image above. Lid to device box may be shown temporarily opened or removed for better view of internal circuitry. Please allow 3 weeks for delivery.

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $1295, S/H: $15.90

RANDOM AUDIO NOISE CRIMINAL FOILER
SOUND-ACTIVATED ALARM SYSTEM
PERSONAL SECURITY SYSTEM

We are living in an increasingly dangerous world! This is The Audio & Random Action Criminal Foiler (A&RACF). Burglars, home invaders, rapists, stalkers, child abductors, and mind control perps are becoming increasingly sophisticated, brazen and brutal in their attacks! Many criminals today use sophisticated lockpicking and tracking (e.g. GPS) devices which they easily and anonymously obtain Online. While TV CSI program crime scene investigators routinely solve complex crimes in an hour's time, in the real world, unprocessed rape kits and burglary evidence pile up in many jurisdictions, and you can't even get a police officer to the crime scene - even for losses in the $1,000s plus serious injury - unless you have surefire evidence of the perpetrators, such as a very unlikely positive ID or license plate number. Police departments are being increasingly stretched beyond their capabilities, due to budget squeezes and their multiple roles of fighting crime, fighting terrorism, and not offending anybody. And because of bulging jails and prisons and lenient judges, more and more dangerous criminals are not being sentenced to prison or are being released early. It is now common for burglars, home invaders, car thieves - even child molesters, rapists, and stalkers - to be free even after several felony convictions. Mind control perps are almost never arrested - much less ever convicted - and operate with impunity.
Fact is today people are being forced to protect themselves from home burglaries, business burglaries, home invasions, rapes, stalking, home child abductions, and mind control attacks. Today, the tired method of using timers to predictably turn lights/radios ON and OFF at preset times and durations is a sure give-away to sophisticated criminals that there is either no one present or everyone is asleep - ripe pickings for crime. The optimally effective alternative is our A&RACF, which produces both RANDOM and/or AUDIO activation of the electric power to lights, radios, TVs, tape/compact disk / digital recorders, etc in both onset times and durations. The A&RACF comes with an audio detector and amplifier circuit with gain tunable up to about 100,000 to activate on even small and short sounds if you wish, plus a random sequence generator circuit causing random activation as well. Each or both features can be selected with toggle switches to activate a built-in outlet (110-120 VAC power) and/or other relay-controlled DC and/or contact closure output(s) to power your lights, radios, TVs, recorders, etc. The A&RACF also includes its special charge-accumulation circuitry that produces a random amount of duration times that the outlet stays activated for any audio or random-activated onset. For audio-activated, the ON duration is directly proportional to the intensity of the detected sound or noise - duration is greatest when the sound/noise is loud (e.g. broken glass, gunshot, explosion, shouting) and/or prolonged (e.g. nearby conversations). For random-activated, duration is directly proportional to the size of the generated random number.

Furthermore, the A&RACF also comes with an amplified audio output and closure relay that can be wired to a recorder to record sounds (whether or not the random and/or audio-activated feature is selected) during those periods that adequate audio is being detected. Thus, the criminals casing your home or business are much less likely to know whether or not the building is occupied or there is someone alert in the building, nor when the next activation will occur or its duration, and they stand a much greater chance of getting caught if they do cause you problems (Note that while nothing can guarantee that a person or property won't be victimized by crime, we believe that the A&RACF will go a long way in foiling even sophisticated criminals).
           The A&RACF is also great for controlling pests both large and small. Random and sound-based light-activations are very stressful for rodents (mice, rats, squirrels, raccoons, skunks, deer repellant), and insects - sound and light activations they cannot predict, time or get used to, so they tend to avoid those areas.
           AC loads up to a total of 10 Amps are switched, so even several lights, radios, TVs, recorders, etc can be activated at once (no light, radio, TV, recorder or device, other than the A&RACF itself, are included).
           NOTE: This device-type was handmade and hand-tooled in limited quantity using several different box types and circuitry, but all have the same functions and features as described above. Therefore, the device you receive may differ in appearance from the one in the image above. Please allow 3 weeks for shipping.

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $995, S/H: $17.90

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $845, S/H: $17.90

New! The UUHS is a system for transmitting ultrasonic sound modulated by audio sound or infrasound in a highly directional manner so that almost all of the sound hits a target in a tight beam. The UUHS is a great device for experimenting with ultrasound communications, mind control and electronic attack. Both the audio input and the infrasonic input of the UUHS consist of a microphone and an external connector (compatible with the earphone output on audio recorders, the recorder is not included). A mixing pot is also included so that, if you choose to mix signals (signal mixing is not required, in which case the pot simply acts as an input sensitivity pot), both the mike input and the external connector input can be mixed together in any ratio from about 10% to about 90% (great for subliminal mixing). This mixing result produces the low-frequency which is mixed with the ultrasonic carrier signal. Outputs simultaneously consist of: (1) Modulated Ultrasonic, (2) Square Wave Ultrasonic Carrier, and (3) Sinewave / Triangular Wave Ultrasonic Carrier. The UUHS also has a 180-degree phase reversal switch for the Square Wave Ultrasonic Carrier, effectively used for ultrasonic cancellation experiments.
NOTE: This device-type was handmade and hand-tooled in limited quantity using several different box types and circuitry, but all have the same functions and features as described above. Therefore, the device you receive may differ in appearance from the one in the image above. Lid to device box may be shown temporarily opened or removed for better view of internal circuitry. Please allow 3 weeks for delivery.

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial. LD141.

We offer three variations of the UUHS, based on the number of ultrasonic transmitter transducer assemblies (you can of course provide your own transducer assemblies if you wish which are compatible with the ultrasonic signals):
                    (1) The Single Transmitter UUHS: The ST-UUHS consists of one ultrasound transmitter transducer assembly. This is all you need to transmit highly-directional modulated ultrasonic sounds in which the audio or infrasonic part of the signal is stripped out of the ultrasonic part over distance in air, sometimes incorrectly referred to as, "air heterodyning." In other words, virtually all of the audio or infrasonic sound energy reaches the target only, as opposed to normal audio sound and infrasound where everyone in the general area of the speaker receives the sound. This works because the attenuation in air of ultrasonic frequencies is much greater than it is for audio and infrasonic frequencies, therefore, as the modulated signal moves through the air, since the ultrasonic component diminishes at a greater rate than the audio and infrasonic components, the modulation component emerges as the major signal, and if audio, can then be heard by someone targeted by the transmitter while others near that person may not hear it at all. The ST-UUHS is also good for doing experiments using ultrasound alone. $695, S/H: $15.90 LIMITED QUANTITY: We only have a few of these left.
                    (2) The Double Transmitter UUHS: The DT-UUHS consists of two identical and interchangeable ultrasound transmitter transducer assemblies. The typical setup here is to point the modulated ultrasound transducer at a target and the second tranducer connected to one of the ultrasonic carrier outputs pointed at the same target to result in localized targeted heterodyning, which results in both sum and difference frequencies. The difference frequencies mostly consists of the low-frequency modulation part, ideally for making voices appear like they are coming from a targeted surface (hard, sound-reflective surfaces work best). $795, S/H: $17.90 LIMITED QUANTITY: We only have a few of these left.
                    (3) The Triple Transmitter UUHS: The TT-UUHS consists of three identical and interchangeable ultrasound transmitter transducer assemblies. The TT-UUHS control box has two outputs for each of the three signal outputs described above. This permits you to use any two of the outputs simultaneously, if you wish, with a second output also of your choice, resulting in much greater experimental variations. Usually, when there are three transducer assemblies, they are all pointed at the same target but at different angles, but multi-targeting is also possible. $945, $15.90. LIMITED QUANTITY: We only have a few of these left.

New! No person on Earth likes being attacked by feral rats! No matter how drunk or high on drugs. Great for warding off people who want to drink, do drugs, do vandalism, go to the bathroom, perform immoral acts or engage in other unacceptable activities on your property. No matter how great the desire to home invade, burglarize, rape or rob. That old "reptilian" brain we all still have always kicks in the instant we hear a rat squeal. We designed the URSUR to automatically and randomly produce varying "rat squeal" type sounds to disrupt the loitering, trespassing, casing, snooping, surveillance, vandalism and other unwanted activities of those who threaten or endanger you, your family or property. The URSUR has many other uses, such as war and combat situations, where you are hiding yourself or something else (e.g. weapons or supplies stash) in a room or other area, you hide the URSUR in a distant part of the room/area, usually behind but a bit offset from what you need to protect. When your enemy comes looking for you or your stuff, more than likely, they won't enter or they will quickly exit the room/area once they hear rat squeals coming from it. Or if they enter or stay in the room/area, they will be highly distracted and surprised with less risk. Can similarly be used to protect a property line, camp perimeter or home garden. Can also be used to more safely and non-lethally control the behavior of rats, rat predators (e.g. bears, mountain lions, bobcats, coyotes, foxes, badgers, skunks, snakes, etc.) and rat prey (e.g. mice, some birds, rabbits, some bugs, etc.), for example, to discourage unwanted cats and dogs, mice, birds, rabbits, skunks, raccoons, deer, etc. from plundering your crops or contaminating or destroying your property, or to attract possibly harmful predators away from your area. Also makes a great Halloween or haunted house feature. Can also be used to mark an area (while keeping unwanted people and animals out of it), trail or cave route you want to return to later. The URSUR can also be used to help protect your business during closed hours, your garage (vulnerable penetration point in many homes), your vehicle and your other property from invasions, burglaries, thefts and vandalism. May save you from resorting to confrontations, violence, retaliations, lawsuits, etc. Sound level and average delay between squeals are adjustable. Built-in speaker. Electronically-synthesized sounds - no tape/compact disk recorder. The URSUR has the typical range of rat sounds - about a few dozen feet (since very loud rat sounds obviously do not come from rats, maximum sound output is designed to be realistic), so to cover a large area, you should contract for two or more.
THE ULTIMO MOSQUITO UNIVERSAL REPELLER: We also sell a variation of this device which produces annoying mosquito and gnat-like sounds, same price. The mosquito repeller also tends to make bad actors leave area not appropriate for them. If interested, please let us know.
NOTE: These device-types were handmade and hand-tooled in limited quantity using several different box types and circuitry, but all have the same functions and features as described above. Therefore, the device you receive may differ in appearance from the one in the image above. Lid to device box may be shown temporarily opened or removed for better view of internal circuitry. Please allow 3 weeks for delivery.

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $995, S/H: $17.90 For the same price, we have some of these which produce high-pitched mosquito-like sounds instead, which is also very annoying to bad actors.

New! Many today are maddenly afflicted by persistent distant humming sounds. These generally very low frequency hums mostly sound like a distant diesel engine idling, approaching train, jet, bus, pump or electric motor. Some detect these infrasonic hums as physical vibrations felt by their bodies or heads (usually not actually heard), often through the Earth or large objects as infrasonic vibrations. Infrasonic sensitivity varies - some can hear/feel infrasounds while others around them can't. Low frequency hum can travel hundreds of miles with little attenuation. Among other things, sudden onset of infrasound or infrasound change is believed to be precursor to impending earthquakes, volcanic activity, tsunamis, tunnel-cave ins / mine cave-ins, dam collapses, snow avalanches, mud slides, etc, and some say also as a general predictor of foreboding and ominous events and as an unknown presence detector in which the disaster can occur even within seconds or minutes of new or changed infrasound. Some people are driven virtually mad because of persistent infrasonic hums day and night (infrasonic humming sounds can be caused by both external and internal factors, such as high blood pressure and toxic heavy metals; there are 100s of toxic waste dumps in northern New Mexico - some near Taos; always see your physician to eliminate or treat medical causes; we provide no medical advice/opinion/claim). Some infrasonic hum comes from unknown sources. Extensive efforts have been made to detect hum. Problem is that most hum sleuths use sound amplifiers and recorders not optimized for infrasonic detection, and few make any attempt to detect vibrational hum - or even use optimum transducers. However, the THIDA is specifically designed to receive and amplify sounds and vibrations in the 10 Hz - 60 Hz bandwidth (we can do infrasonic frequencies below 10 Hz, down to about 0.01 Hz, at additional cost). The THIDA has two selections: 10 Hz - 55 Hz (non-AC power hum), and 59 Hz - 61 Hz (AC power hum). Amplifier gain is tunable from 5,000 to 500,000. Includes automatic gain control (AGC) to extra-boost very faint sounds over louder more obvious ones. Amplified frequencies are then multiplied to put them in the audio range for you to hear them, and includes visual display. Helps you detect and locate external bass and infrasound hum sources, both sound and vibration.
NOTE: This device-type was handmade and hand-tooled in limited quantity using several different box types and circuitry, but all have the same functions and features as described above. Therefore, the device you receive may differ in appearance from the one in the image above. Lid to device box may be shown temporarily opened or removed for better view of internal circuitry. Please allow 3 weeks for delivery.

LIMITED QUANTITY. We have only a few of these left. Made by: LONE STAR CONSULTING, INC., El Paso, TX (www.lonestarconsultinginc.com)- see its FREE Mind Control & Electronic Attack Tutorial.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $2995, S/H: $22.90

The ULTIMO WATER LEAK DETECTOR &
WATER LEAK LOCATOR (UWLD&L) -
WATER LEAK PINPOINTER + OTHER USES:
PLANT STIMULATOR, ANT KILLER, WORM SURFACER,
SOIL AERATOR, PLANT SOIL WETNESS TESTER/MONITOR,
METAL OBJECTS DETECTOR, ATTACK DEFENDER - more!

NOTE: We realize that if you suspect a water leak in your home or business, you MUST address it as soon as possible. For our Ultimo Water Leak Detector / Locator, if you wish and request of us by email, we will ship within 1 business day of our receipt of your payment for this Item by cash, Postal M.O. (U.S. or Canada (in $US), Money Transfer Services (MTS), or pre-approved PayPal. For an additional prepaid S/H from you, we will also ship by Overnight or 2nd. Day Air.

Does your home or business have a possible water leak problem? Indications are usually high and escalating water bills, sounds of running water late at night when no one is up using water, unusual but usually sudden sounds coming out of the plumbing (e.g. compressed air sounds, vibrations), loss of water pressure, air bubbles, soil, bugs, rust or root pieces in the water, creaky or settling sounds of the building, sticky doors that weren't sticky before, dampness, and/or cracks which suddenly appear in floors, walls, ceilings, foundation, driveway, one or more unexplained increases in your water usage, notification from your water provider that you usage is unexpectedly high, etc. Leaking pipes, joints, and fixtures and appliances are common these days, and many private and public properties all over America have serious water leaks, and not usually covered by home insurance. While in most homes and businesses, water pipes are routed under the floor, in many they may also be routed through the walls and even the attic crawl space. Leaking water can cause tremendous damages to structures - even catastrophic settling and cracking of the building or its foundation - which can cost you $1,000s and even $10,000s to repair - even destroy the building itself - not to mention wasting invaluable and ever-decreasing drinking water and very high water bills. Water leaks occur because of plumbing aging, vibrations and tremors (e.g. heavy vehicle traffic (especially heavy vehicles like trains, trucks, buses), construction and industrial or military activities, road work or city sewer/water line work nearby or over the water line, and from earthquakes, flooding, nearby explosions, exposure of water line to hazards, sonic booms, avalanches and other earth movements, corrosive soils or water (e.g. caliche), or simply through aging and/or poor materials and workmanship, etc.), defective materials, defective workmanship, corrosion, frozen and burst water lines or faucets, soil settlement, erosion, overpressurization from the city or other water utility company, hard water, and plant roots attracted by a small leak and making it into a bigger water leak or multiple leaks. We once experienced a serious water leak under our driveway caused by a pea-size stone pressed up against the water line - every time someone drove on the driveway, microvibrations rubbed the two together until a hole was rubbed into the line within a few years time.
           You can usually easily, quickly and at no-cost test your water system for water leaks: You turn OFF all water uses inside the building the best you can (watch out for leaky faucets, running toilets, icemaker, swamp cooler, etc.), you then look at the water meter and if it is still turning, in most cases you have a leak somewhere in your plumbing system which you should get repaired - and usually quickly. Usually, the faster the meter turns, the greater the leak and the emergency to repair it. Even a moderate leak dozens of feet from a building can structurally damage the building. Small leaks can turn into major leaks and floods within minutes or a few hours, or within days, weeks and months - depending on many factors. However, while the turn-OFF test will tell you that you likely have a water leak somewhere on your side of the water meter, it won't tell you exactly where the leak is at in typically complex business and home plumbing systems, so you are faced with either finding the specific location of the leak within a few feet using special leak-finding equipment (preferably using this our UWLD&L device), or tearing up most or all of your yard or driveway where the water line passes under to frantically locate the water leak in the old-fashioned greatly laborious, expensive and time-consuming brute-force way - often at $1,000s in expenses for brute force searches for water leaks and to fill-in and restore all what the diggers dug up. Since locating the water leak usually requires fast action on your part, it is far cheaper to have the UWLD&L device on hand, rather than finding yourself forced into having most or all of your entire yard or driveway dug up and then refilled. Once you use the UWLD&L device to help pinpoint your leak location, of course if you can't do the plumbing work yourself, then seriously consider having a professional plumber to do the job for you.
           Municipalities almost never check for water leaks on private property (local plumbers don't like the competition), and some don't even have water leak locator equipment to pinpoint their own municipal water leaks as evidence by the large stretches of streets often dug up to locate and repair water leaks. Many small town and rural area plumbers do not carry water leak locator equipment - only equipment to test water lines in general - they can usually determine what water line the leak is in but not exactly where it is in that line, which may be dozens - even 100s of feet long. Plumbers who do carry water leak locators typically charge $200 - $300 to do this job EACH TIME they test your water lines, it can take days for them to come out and test your water lines - even in emergency situations - and then you have to depend upon them to accurately tell you the location of the water leak. And some plumbers will charge a double charge if they detect a leak in your system but you don't hire them (at great additional expense) to do the plumbing repairs - even if they can't pinpoint your leak. We could find no plumbers or equipment rental shops in a city of 500,000+ who would rent their leak detectors to us or let us verify the leak ourselves using their leak detection equipment. Some plumbers subcontract out for water leak detectors at your added expense - worse, often resulting in multiple finger-pointing contractors. Since plumbers charge far more for tearing up your entire yard and/or home or business and replacing an entire line or large line section rather than pinpointing the leak and replacing only that very small part of the plumbing with the leak, crooked plumbers will still claim that they can't pinpoint the water leak using their water leak locator equipment, so you end up not only paying for the entire job but also their expensive leak testing efforts. Plumbers charge a lot, but on top of that, they usually do not restore the site they damaged to reach the plumbing - some won't even clean up their debris - all that is left to the owners, which is often also very costly, back-breaking and time-consuming work. Also, if you can pinpoint your leak and do a spot repair of it, you can avoid the scarring of a much larger area resulting if the leak is not pinpointed and the entire line must be replaced, which gross repair can substantially reduce the value of your property and exaggerate to prospective buyers and renters how bad your leak situation was. The cost for a plumber to replace your entire yard line and/or building line and for you to clean up the debris and restore the site can cost you many $1,000s. However, by pinpointing the leak by using the UWLD&L and just repairing the leak, your costs are usually a few $100s, often less. Detecting leaks is one vital area of life where if you don't want the job to put you in the poor house, you often must do the job yourself!
           If you are a renter, don't think that you don't need to report leaks to your landlords. Failure to report leaks can result in you being sued, losing damage deposit money, evicted AND forced to look for a new home, not to mention that many renters these days pay their own water bills, and also the great waste of drinking water. Also, the costs to landlords to repair leaks plus the resulting damages due to late reporting, one way or the other, the renter ends up paying for - usually with higher rents - so smart renters do their due diligence and promptly report leaks to their landlords, and perhaps ask them to consider the UWLD&L to save them - subsequently you - considerable expenses. If you are an owner or landlord, you definitely MUST have the UWLD&L on hand to immediately address all suspected leak situations.
           The 41.5" long UWLD&L is simple and easy to use. The UWLD&L is a system which is used mostly in earthen areas over or near water lines to detect and pinpoint the most likely locations of water leaks. The UWLD&L is simple and fast to operate; it has two pointed parallel probes at the end, which you push into the earth along the water line path, usually to a depth of 2" - 10" (depending on depth of water line, soil hardness and rocks in the soil). The UWLD&L detects and measures the resistance between the probes, using the provided digital multimeter, which you simply plug the UWLD&L into. If the soil resistance between the probes drop, then the soil is more conductive at that spot. Because soil conductivity is affected by how wet the soil is, resistance dips almost always point to water leak origins. For use in hard surface areas (e.g. paved areas, such as concrete slabs, asphalt) non-accessible through soil, you drill pairs of small holes into the pavement (drills and bits not included) to insert the probes. The provided User Manual describes how to operate the UWLD&L in the most labor-saving and efficient way to quickly zero in on water leaks learned from many tests. Note that while the probes are 11" long, you can detect water leaks as deep as about 4 feet (many soils) because when water leaks into soil it tends to percolate upward often to substantial distances due to the pull of the sun on the surface moisture and water cohesion force (you can verify this by placing one end of a vertical dry towel in a bowl of water and watch the water percolate up the towel), as well as percolate laterally outward and downward (in addition, if the leak is in the form of a spray, the water can be forced to shoot dozens of feet in the soil).
           We are selling several of these UWLD&L devices. They are all handmade with minor variations between them, so the one you get may not be the exact one in the images (e.g. the meter in image comes in yellow and red color).
           The UWLD&L is not limited to finding water leaks in fresh water lines, but can also be used to find leaks in swimming pools, sprinkler systems, irrigation systems, water pumps, valves, faucets, sewer systems, septic systems, fire hydrants, and water storage tanks - works well with virtually every type of underground water situation as long as some of its wetness is close enough to the surface to touch the probe points. For sewer line leaks and septic tank line leaks, the UWLD&L should also help you find areas where roots have invaded your sewer line or septic line.
           The UWLD&L has other possible non-leak uses: For examples, it can be used to detect possible sources of shallow underground water sources, and to detect buried metal objects ranging from metal pipes to buried coins, jewelry and treasures, and conductive minerals - even underground gold nuggets, gold veins and gold-rich soils. When resistance plunges for relatively short movements of the probes or to near zero ohms resistance, it often indicates close proximity to or contact with a metal object or conductive mineral (while great in conjunction with a metal detector, the UWLD&L can work well in areas where metal detectors don't do well). When used with a voltage source instead of the multimeter (voltage source not provided), which may be as simple as a single battery connected to it, the UWLD&L can be used to stimulate plant roots, and even to electrically stimulate earthworms to surface for gardening and fishing uses. The UWLD&L can also be used to puncture the ground to aerate the soil, to quickly pick up trash blown onto your yard and plants, to pick high fruit from trees, to gig fish, and even to ward off feral animals. You can also use the UWLD&L to test for soil wetness for gardening and agriculture purposes to determine how well and uniform your irrigation system is providing water for your plants, your fishing worm bed, etc., to help you determine when, how often and how much to water. Also, the the small test lead probes which are included with the digital meter are also pointed and work well for testing soil wetness of potted plants and in small or confined garden areas.
           The UWLD&L has so many important uses that everyone should keep one handy. And since leaks can occur at any time and are usually near-emergency and sometimes emergency situations, you really need to have a UWLD&L right on hand so that you can immediately address suspected leaks. 10 lb.
           Note 1: Since we do not have control over your soil and leak conditions (both of which can be highly variable and complex situations) nor how you will use this device, we cannot guarantee the UWLD&L will pinpoint your water leaks, and we assume no liability for false positives, false negatives, locating or failure to locate a water leak that caused or will cause damages, failure to identify the exact location of a water leak, or for anything else related to your use or abuse of the UWLD&L device or your leak problems. Also, the UWLD&L detects only water leaks (not tested or approved for non-water leaks) that wets soil. Also, we are not licensed plumbers, so we don't provide plumbing services, claims, advice or opinions.
           Note 2: The UWLD&L is sold and intended strictly for personal use only and under our consumertronics.net policies. The UWLD&L is not sold nor intended for business use, for commercial use, for institutional use, for governmental use, nor for any other type of group use.
           HYPERSENSITIVE SOUND ALARM (HSA): Another very effective way to detect and locate water leaks (hydrophone) (plus non-water leaks: Air leaks, gas leaks, fuel leaks, chemical leaks, etc.), is by using The Hypersensitive Sound Alarm (which also has many other critical uses ranging from detecting people trapped in cave-ins and collapsed mines, buildings, tunnels, ditches, wells, avalanches, landslides, etc. (active earthquake zones, mining areas, avalanche areas, tsunami areas, war zones, terrorist target areas), hidden pest infestations, unknown and strange sounds, animal studies, home security / burglar alarm system, seismic activity, etc.). The HSA produces a highly amplified audio output and a sound alert output, and is described elsewhere on this website. Water leaks and other leaks under pressure usually make spurting, spraying, gurgling or PSSS-type sounds; such low-intensity underground sounds usually cannot be heard by the naked ear - especially when the sounds are faint and your ears are 5+ feet off the ground. Since both soil conductivities and the conduction of sounds in the earth widely vary due to many soil and water leak factors, one device may work better than the other, and ideally one would use both devices for detecting and pinpointing water leaks or underground water sources.

NOTE #1: The UWLD&L differs from both other similar devices and our previous model because of its 4 major functional improvements: (1) Full metal body construction to make it stronger. (2) Added handle for easier pushing, and for carrying, hanging and storing the device. (3) Foot extension (foot pedal) also for easier pushing. (4) Greater overall length for greater comfort, especially for taller people (about 41.5" vs 36 " found in others).

NOTE #2: Gold carpenter's level shown on left and HSA are not included. The probe ends are very sharply pointed for easiest earth penetration. Be very careful when using, transporting or storing this tool to not injure or damage anyone or anything. Safety shoes, leather gloves, and protective eyewear and head wear are highly recommended. The foot extension should only be used if the soil is particularly tough to penetrate and a probe is not stopped by a rock or other hard object. Be careful when using tool so you don't lose your balance and fall. Don't force this tool through rocks or broken concrete or asphalt. If you use tool to penetrate into a sticky soil, such as clay soil, don't go too deep and slowly work the probes out without bending, jerking or twisting them.

BUYER: Order by Title (below image) - Email us your order. - List History: LD122. - Price: $295.95. S/H: $20.90

(Sorry, we are sold out of this Water Leak Detector / Locator model, see herein for our latest and advanced model). Does your home or business have a possible water leak problem? Indications are usually high and escalating water bills, sounds of running water late at night when no one is up using water, unusual but usually sudden sounds coming out of the plumbing (e.g. compressed air sounds, vibrations), loss of water pressure, air bubbles, soil, bugs, rust or root pieces in the water, creaky or settling sounds of the building, sticky doors that weren't sticky before, dampness, and/or cracks which suddenly appear in floors, walls, ceilings, foundation, driveway, etc. Leaking pipes, joints, and fixtures and appliances are common these days, and many private and public properties all over America have serious water leaks. While in most homes and businesses, water pipes are routed under the floor, in many they may also be routed through the walls and even the attic crawl space. Leaking water can cause tremendous damages to structures - even catastrophic settling and cracking of the building or its foundation - which can cost you $1,000s and even $10,000s to repair - even destroy the building itself - not to mention wasting invaluable and ever-decreasing drinking water and very high water bills. Water leaks occur because of plumbing aging, vibrations and tremors (e.g. heavy vehicle traffic, construction and industrial activities, road work or city sewer/water line work nearby or over the water line, and from earthquakes, flooding, nearby explosions, exposure of water line to hazards, avalanches and other earth movements, etc.), defective materials, defective workmanship, corrosion, frozen and burst water lines or faucets, soil settlement, erosion, overpressurization from the city or other water utility company, hard water, and plant roots attracted by a small leak and making it into a bigger water leak or multiple leaks. We once experienced a serious water leak under our driveway caused by a pea-size stone pressed up against the water line - every time someone drove on the driveway, a small amount of vibration rubbed the two together until a hole was rubbed into the line in a few years time.
           You can usually easily, quickly and at no-cost test your water system for water leaks: You turn OFF all water uses inside the building the best you can (which may be difficult if you have leaky faucets or running toilets, icemaker, swamp cooler, etc.), you then look at the water meter and if it is still turning, in most cases you have a leak somewhere in your plumbing system which you should get repaired - and usually quickly. Usually, the faster the meter turns, the greater the leak and the emergency to repair it. Even a moderate leak dozens of feet from a building can structurally damage the building. Small leaks can turn into major leaks and floods within minutes or a few hours, or within days, weeks and months - depending on many factors. However, while the turn-OFF test will tell you that you likely have a water leak somewhere after the water meter, it won't tell you exactly where the leak is at in typically complex plumbing systems, so you are faced with either finding the specific location of the leak within a few feet using special leak-finding equipment (e.g. using this our UWLD&L device), or tearing up most or all of your yard or driveway where the water line passes under to frantically locate the water leak in the old-fashioned greatly laborious, expensive and time-consuming way - often at $1,000s in expenses for "brute force" searches for water leaks and to replace what the diggers dug up. Since locating the water leak usually requires fast action on your part, it is far cheaper to have the UWLD&L device on hand, then finding yourself forced into having most or all of your entire yard or driveway dug up and then refilled. Once you use the UWLD&L device to help locate your leak, of course if you can't do the plumbing work yourself, you should consider hiring a plumber to do the job for you.
           Municipalities almost never check for water leaks on private property (local plumbers don't like the competition), and some don't even have water leak locator equipment to pinpoint their own municipal water leaks as evidence by the large stretches of streets often dug up to locate and repair water leaks. Many small town and rural area plumbers do not carry water leak locator equipment - only equipment to test water lines in general - they can usually determine what water line the leak is in but not exactly where it is in that line, which may be dozens - even 100s of feet long. Plumbers who do carry water leak locators typically charge $200 - $300 to do this job EACH TIME they test your water lines, it can take days for them to come out and test your water lines - even in emergency situations - and then you have to depend upon them to accurately tell you the location of the water leak. And some plumbers will charge a double charge if they detect a leak in your system but you don't hire them (at great additional expense) to do the plumbing repairs - even if they can't pinpoint the leak. We could find no plumbers or equipment rental shops who would rent their leak detectors to us or let us verify the leak ourselves using their leak detection equipment. Some plumbers subcontract out for leak detection, so you may end up dealing with multiple finger-pointing contractors. Since plumbers charge far more for tearing up your entire yard and/or home or business and replacing an entire line or line section rather than pinpointing the leak and replacing only that very small part of the plumbing, crooked plumbers will still claim that they can't pinpoint the water leak using their water leak locator equipment, so you end up not only paying for the entire job but also their expensive leak testing. Plumbers charge a lot, but on top of that, they usually do not restore the site they damaged to reach the plumbing - some won't even clean up their debris - all that is left to the owners, which is often also very costly, back-breaking and time-consuming work. Also, if you can pinpoint your leak and do a spot repair of it, you can avoid the scarring of a much larger area resulting if the leak is not pinpointed and the entire line must be replaced, which gross repair can substantially reduce the value of your property and exaggerate to prospective buyers and renters how bad your leak situation was. The cost for a plumber to replace your entire yard line and/or building line and for you to clean up the debris and restore the site can cost you many $1,000s. However, by pinpointing the leak using the UWLD&L and just repairing the leak, your costs are usually a few $100s. Detecting leaks is one vital area of life where if you don't want the job to put you in the poor house, you often must do the job yourself!
           If you are a renter, don't think that you don't need to report leaks to your landlords. Failure to report leaks can result in you being sued AND forced to look for a new home, not to mention that many renters these days pay their own water bills, and the great waste of drinking water. Also, the costs to landlords to repair leaks, one way or the other, the renter ends up paying for - usually with higher rents - so smart renters report leaks early to their landlords, and perhaps ask them to consider the UWLD&L to save them - subsequently you - considerable expenses.
           The 36" long UWLD&L is simple and easy to use. The UWLD&L is a system which is used mostly in earthen areas over or near water lines to detect and pinpoint the most likely locations of water leaks. The UWLD&L comes with a wand with two pointed probes at the end, which you push into the earth along the water line path, usually to a depth of 2" - 8" (depending on depth of water line, soil hardness and rocks in the soil). The UWLD&L detects and measures the resistance between the probes, using the provided digital multimeter, which you simply plug the UWLD&L into. If the soil resistance between the probes drop, then the soil is more conductive at that spot. Because soil conductivity is mostly affected by how wet the soil is, resistance dips almost always point to water leak locations. For use in paved areas (e.g. concrete slabs, asphalt), you drill pairs of small holes into the pavement (drills and bits not included) to insert the probes. The provided User Manual describes how to operate the UWLD&L in the most labor-saving and efficient way to quickly zero in on water leaks.
           We are selling several of these UWLD&L devices. They are all handmade with minor variations between them, so the one you get may not be the exact one in the images (e.g. the make and model of meter in image comes in yellow and red color).
           The UWLD&L is not limited to finding water leaks in fresh water lines, but can also be used to find leaks in swimming pools, sprinkler systems, irrigation systems, water pumps, valves, faucets, sewer systems, septic systems, fire hydrants, and water storage tanks.
           OTHER IMPORTANT UWLD&L USES: For examples, the UWLD&L can be used to detect possible sources of shallow underground water sources, and to detect buried metal objects ranging from metal pipes to buried coins, jewelry and treasures, and conductive minerals - even underground gold nuggets and gold veins. When resistance plunges for relatively short movements of the probes or to near zero ohms resistance, it often indicates close proximity to or contact with a metal object or conductive mineral (great in conjunction with a metal detector). When used with a voltage source instead of the multimeter (voltage source not provided), as simple as plugging in a single battery to its leads, the UWLD&L can be used to stimulate plant roots, and even to electrically stimulate earthworms (e.g. fishing worms) to surface for gardening and fishing uses, and to kill bugs on the ground (e.g. makes a great fire ant killer (wet the soil around the ant hole, then stick in the electrified UWLD&L probes)). The UWLD&L can also be used to puncture the ground to aerate the soil, to quickly pick up trash blown onto your yard and plants, to pick high fruit from trees, to gig fish, and to stop feral animal attacks (electrified or non-electrified). You can also use the UWLD&L to test and monitor soil wetness for gardening and agriculture purposes to determine how well and uniform your irrigation system is providing for your plants, your fishing worm bed, etc., to help you determine when, how often and how much to water. Also, the the small test lead probes which are included with the digital meter are also pointed and work well for testing soil wetness of potted plants and in small or confined garden areas. (CAUTION: Avoid physical or electrical contact with probes. Connecting any voltage source to the UWLD&L above 50VDC or 30VAC, or amperage above 100mA, substantially increases risks of electric shock or fire, especially around flammables, so use with great care).
           The UWLD&L has so many important uses that everyone should keep one handy. And since leaks can occur at any time and are usually near-emergency and sometimes emergency situations, you really need to have a UWLD&L right on hand so that you can immediately address suspected leaks.
           The UWLD&L has so many important uses that everyone should keep one handy. And since leaks can occur at any time and are usually near-emergency and sometimes emergency situations, you really need to have a UWLD&L right on hand so that you can immediately address suspected leaks.
           Note: Since we do not have control over your soil and leak conditions (both of which can be highly variable and complex situations) nor how you will use this device, we cannot guarantee the UWLD&L will pinpoint your water leaks, and we assume no liability for false positives, false negatives, locating or failure to locate a water leak that caused or will cause damages, failure to identify the exact location of a water leak, or for anything else related to your use of the UWLD&L device or your leak problems. Also, the UWLD&L detects only water leaks (not tested or approved for non-water leaks) that wets soil. Also, we are not licensed plumbers, so we don't make plumbing repairs or provide plumbing claims, advice or opinions.
           HYPERSENSITIVE SOUND ALARM (HSA): Another very effective way to detect and locate water leaks using the unique sounds that leaks make (hydrophone feature), is by using The Hypersensitive Sound Alarm. The HSA produces a highly amplified audio output and/or a latched-ON sound alert output. The HSA also detects and pinpoints non-water leaks: Air leaks, gas leaks, fuel leaks, chemical leaks, etc. And the HSA detects leak sounds and other sounds through hard surfaces (e.g. concrete, asphalt, wood, ceramic tile, hard soils, rocky soils, etc.) that probes would have difficulty penetrating. The HSA also has many other critical sound detection uses, including detecting people trapped in cave-ins and collapsed mines, buildings, tunnels, ditches, wells, avalanches, landslides, etc. (e.g. active earthquake zones, mining areas, avalanche areas, tsunami areas, war zones, terrorist target areas), hidden pest infestations, unknown and strange sounds, animal studies, home security / burglar alarm system, seismic activity, etc. The HSA will also alarm on faint, brief and distant other alarm sounds that you may otherwise miss because of temporary absence, inattention, bad hearing or being asleep. Water leaks and other leaks under pressure usually make spurting, spraying, gurgling, hissing or PSSS-type sounds; such low-intensity underground sounds often cannot be heard by the naked ear - especially when the sounds are faint and your ears are 5+ feet off the ground. Since both soil conductivities and the conduction of sounds in the earth widely vary due to many soil and water leak factors, one device type may work better than the other, and for running water, ideally one would use the HSA if the UWLD&L cannot detect the water leak point or underground water source. The HSA is not included with the UWLD&L but is another popular separate offer of ours.

NOTE: The UWLD&L probe ends are very sharply pointed for much easier penetration into earth. Be very careful when using this tool to not injure or damage anyone or anything. Safety shoes with rubber soles, leather gloves and protective eyewear and head wear are highly recommended. Be careful when using tool so you don't lose your balance and fall. If you use tool to penetrate into a sticky soil, such as clay soil, don't go too deep and slowly work the probes out without bending, jerking or twisting them.

BUYER: Order by Title (below image) - Email us your order. - List History: LD122. - Price: $395.00. S/H: $15.90

1' WIDE HEAVY-DUTY STEEL SCREENING
GALVANIZED STEEL HARDWARE CLOTH
FERMI CAGE / FARADAY CAGE EMF SHIELDING SCREEN
Helps Protect Against Mind Control, Electronic Attacks - Does Much More!

New old stock (NOS). Sold by the foot - price is per foot. 1-foot wide Heavy-Duty Steel Screening (Hardware Cloth), Galvanized Steel, with small, tight diamond-shaped openings. Very hard to find these days. This screen is 3-4 times thicker than window screen. Great for wide ranges of screening needs, including window screens and door screens, screening dirt for concrete and lawn jobs, mining operations (e.g. gold mining), electromagnetic shielding (EMF shielding), animal cages, sports, fireplaces, HVAC, automotive, filtration systems, tool and parts cleaning baskets, storage baskets, fish traps, self-defense shields, decorative screens, crafts screens and scaffolding, storm protection, etc. Larger openings than typical window screens, this screen permits much better air flow and visibility while still blocking houseflies and other bugs and debris. Provides great protection in many applications while permitting good ventilation and visibility. And this steel screen is thick and strong, greatly resists tearing, deforming and corrosion. Holes spaced 1/4" and 1/6" apart. Purchases are cut from the roll shown.
Originally bought for Lone Star Consulting, Inc., El Paso, TX (www.lonestarconsultinginc.com) for its pioneering work in mind control, electronic attack and electronic harassment detection and countermeasures technologies. This steel screen was bought for Faraday cages / Fermi cages, and similar Faraday- and Fermi-type assemblies and other shielding, antenna and electrical grounding uses, including shielding computers, cellphones, cordless phones, ipods, ipads and other wireless devices from external hacking through EMF fields. Excessive quantity originally bought, this is the surplus we are selling. Since this screen is ferromagnetic, it makes a great shield against both magnetic fields and electrical fields, whereas common aluminum screen shields only against electrical fields allowing dangerous magnetic fields to penetrate.

BUYER: Order by Title (below image) - Email us your order. - List History: LD141. - Price: $14.95 per foot (1 foot min, 6 feet max); S/H: $5.90 first foot + $2.90 for each additional foot; plus $5 per cut (specified by customer, 1 cut min).

New old stock (NOS) in original packages. Keepsafer Security System, consisting of three keypad controls and one sensor unit. We have not used any of these components. We originally bought two sets of these from one lot, and used one set, and it works fine.

BUYER: Order by Title (below image) - Email us your order. - List History: LD163. - Price: $49.95, S/HL: $7.90.

EMERGENCY EARTHQUAKE SURVIVAL TOOL, #10125
Main Gas Valve Shut-Off 2 Sizes Hanger Attachment
+ 2 Other Hex Valve & Appliance Tools

New old stock (NOS), new in original package. Emergency Earthquake and Disaster Survival Tools. Main Gas Valve Shut-Off for Two Sizes with Hanger Attachment, plus Two Other Valve & Appliance Tools. Model 10125, Zinc-Plated Steel, Light, Strong, Reflective, Easy To Use, Fits 1/2" and 3/4" Rectangular Valves, plus special tools for other Hex Valves. Made in USA. If you find yourselves in an earthquake, hurricane, tornado, tsunami, fire, flood, explosion, terrorist attack, or other disaster, you need to act IMMEDIATELY to turn off your gas! That is not the time to be scrounging around in your shop or tool box. You need dedicated strong tools in safe or convenient locations near to where they will be needed BEFORE the disaster hits for you to instantly access them to turn off various gas and appliance valves. If you fail to do this, the chances that you and your loved ones will be devastated by a gas explosion are much higher. Your very lives could depend upon these tools. And great for survivalists and preppers.

BUYER: Order by Title (below image) - Email us your order. - List History: LD163. - Price: $29.95.

Used and in very good operational condition; shows some wear and tear. Vintage Midland Weather Monitor Radio. Portable, great for trips, camping, outings, athletic events, parades, outdoor concerts, and everything else outdoors.

BUYER: Order by Title (below image) - Email us your order. - List History: LD163. - Price: $19.95.

MAGNETO-SONIC E214020, 12MJ
ULTRASONIC INSECT & RODENT CONTROLLER
PEST CONTROLLER MODULE, Lentek

Used and in very good condition. Magneto-Sonic Pest Controller (Lentek), Ultrasonic Insect & Rodent Controller, E214020, 12MJ. Plugs into 120VAC outlet. Lentek is well known for making the ultrasonic Bark Free.

BUYER: Order by Title (below image) - Email us your order. - List History: LD153. - Price: $29.95, S/H: $12.90

Used and in good condition. We used this several years ago, at which time it worked fine, to stop our dog from incessantly barking.

BUYER: Order by Title (below image) - Email us your order. - List History: LD163. - Price: $9.95.

New old stock (NOS). Visaccess CL-8A Digital Keypad, Microprocessor-Controlled Security Console. Used in conjunction with burglar alarm systems and home invasion alarm sytems to prevent burglaries and other home invasions.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $69.95.

HOME SECURITY CONSOLE / BURGLAR ALARM CONSOLE
HOME INVASIONS ALARM CONSOLE, SCN 487103

New old stock (NOS). SCN 487103 Home Security Console / Burglar Alarm Console / Home Invasion Alarm Console. Used in conjunction with burglar alarm systems to prevent burglaries and other home invasions. Very high quality.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $249.95.

RJ45 DSL FILTER MODULE / MODEM FILTER
NETWORK FILTER / COMPUTER FILTER
ALARM USES, EXCELSUS ALARMS

New old stock (NOS), in original sealed package. RJ-45 / RJ45 DSL Filter Module, Modem Filter / Network Filter / Computer Filter. Made for the alarm industry by Excelsus.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $14.95.

New old stock (NOS), in original box with decals, user sheet. Ademco Moose Power MPI-11 High-Powered Siren Driver, Ademco Moose Power.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $19.95.

New old stock (NOS), in sealed original package. DATAKit / Data Kit Electronic Combination Kit (electronic combination lock kit), LKG Industries.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $14.95.

HOUSEHOLD FIRE AND BURGLARY WARNING SYSTEM
CONTROL UNIT ASSEMBLY
"S1598" UL #, "Issue No. AF-7284", and "F12354MX"

(Sorry, we recently sold this F12345MX Household Fire and Burglary Warning System; we are looking for more.) New old stock (NOS). Household Fire and Burglary Warning System Control Unit Assembly. Marked "S1598" (UL #), "Issue No. AE-4386", and "F12354MX". That is all the info we have on this Fire Alarm / Burglar Alarm system card.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $39.95.

New, hard copy or eBook. The current tsunami detection and warning system (The Tsunami Warning System) consists of complex, immobile, very expensive and highly structured detection and communications systems. The result was clearly demonstrated on Dec. 26, 2004 at the cost of about 300,000 lives and $ billions in damages due to the Indian Ocean tsunami

Tsunamis are caused by underwater or coastal earthquakes, volcanoes, landslides and asteroid strikes. Huge underwater and coastal landslides resulting in deadly tsunamis can be triggered by even small earthquakes, volcanoes, underwater natural and manmade explosions, and even purportedly by global warming. Therefore, detecting and measuring earthquakes, while important to tsunami detection, are by themselves highly inadequate. Those facing tsunami dangers not only live near the Pacific Ocean where all the DART sensors are now located, but tsunamis can strike just about anywhere there is a substantial body of water, also including but not limited to the Indian Ocean (as the world has seen), the Atlantic Ocean, the Gulf of Mexico, the Great Lakes, and big rivers, bays, other lakes and even reservoirs. Most Americans live within striking distance of a tsunami. If not quickly warned before a tsunami nears the shore, you may have only seconds or minutes to escape or face a violent and horrible death.

The current tsunami system leaves vast areas of the oceans unmonitored. It is limited to the Pacific Ocean, and it currently consists of 6 deep ocean sensors, 2 of which were recently and may still be broken (Aleutian Islands). The San Francisco Chronicle states about the current tsunami sensors (1/10/05): "Then there's the problem of tsunami-watching instruments that, like snoozing guard dogs, aren't working when they are needed."

The current system is also extremely expensive. Each deep ocean sensor costs $2,500,000, requires $125,000 in annual maintenance, and has a life of two years, and is apparently structured to provide slow, inadequate and subjective warning responses to incoming tsunami waves that can travel 500+ mph in open ocean. The current system has a record of not warning about tsunamis that did occur, and falsely warning about tsunamis that did not occur (75% false alarm rate since 1975!). Asinine claims have even been made by proponents of this clearly defective, inadequate and very expensive current system that it is the only system that can possibly work to detect and measure tsunamis in open ocean waters!

Our book describes, illustrates, explores and proposes simple, small, inexpensive electronics monitoring devices that can be carried on aircraft or watercraft of virtually any kind and size and dropped into the water whenever and wherever a tsunami is suspected (as it is very difficult to visually detect tsunamis in open waters even on a clear day) - simple, cheap, effective methods to detect and measure tsunamis in open waters real time using relatively inexpensive, highly mobile, low-tech methods and devices, and without using permanent buoys - a true tsunami early warning system with global reach. Each device should cost a few $100s or $1000s - not $ millions - and our system can be deployed globally within a few months - not years or decades of more studies, planning and political bickering between nations - possibly saving thousands of lives!

Author John Williams, M.S.E.E., solved "The Riddle of The Ages" - how the Great Pyramid of Egypt was really built (using a centralized hydraulic elevator - not a ridiculous 481 foot tall ramp!), which you can verify at consumertronics.net/cheops.html - proof of author's creative, insightful and visionary genius to solve in practical ways what was considered before by others to be virtually without solution.

Illustrated. No intellectual rights of the author, John Williams, M.S.E.E., are included in this sale. Please see our other tsunami book, "MITIGATE TSUNAMI DESTRUCTIVE FORCES, PLUS."

Author John Williams, M.S.E.E. (Consumertronics.net). See our many other high-tech survival publications being sold now on this website. You should especially look at our exciting and popular "MITIGATE TSUNAMI DESTRUCTIVE FORCES, PLUS," "CREATIVE DREAMING BY A PROVEN CREATIVE GENIUS," "THE WILLIAMS SPECIAL THEORY OF GRAVITY," "THE WILLIAMS'S HYDRAULIC THEORY TO CHEOPS'S PYRAMID," and "HOW TO STOP GULF OIL LEAK & OTHER FLUID & GAS LEAKS" manuals, just to name a few.

BUYER: Order by Title (below image) - Email us your order. - List History: LD095. - Price: $29.95.

REAL STAINLESS STEEL ARNOWRAP / ARNO WRAP
STAINLESS STEEL FOIL, WRAP, SHEET, FILM, 14-1/2" Wide

New old stock (NOS). Real Stainless Steel ArnoWrap / Arno Wrap Stainless Steel Wrap, Foil, Sheet, Film, 14-1/2" wide. We measured thickness at about 0.002" (foil thickness is not printed on the box or invoice that came with it). NOTE: This ArnoWrap is REAL STAINLESS STEEL - not cheezo painted vinyl to look like stainless steel sold by others, and not aluminum foil or tin foil. Because ArnoWrap is made of real STEEL - a ferromagnetic metal - it has both electrical AND magnetic shielding properties, which can be critical for some applications. We also find that stainless steel foil is much stronger (tear resistant), more durable, and much more X-Ray penetration resistant than aluminum foil. Endless electrical, mechanical and appliance covering uses: Protects and preserves parts, tools, equipment, recording tape and other magnetic recording media, unexposed film, precious things, collectibles, survival items, medical supplies, ammo, etc. Originally designed to protect dies, bits and other tools, and mechanical parts from abrasion, corrosion, oxidation, scaling, and decarburization. We (consumertronics.net) use it in our electronic mind control research as shielding material, and so does Lone Star Consulting, Inc. (lonestarconsultinginc.com). One sheet of this stainless steel foil resists X-Rays as much as about 9 sheets of same thickness of aluminum foil.

Sold by the linear foot, as taken from the stainless steel reel or roll as shown. We do one cut total no matter how many feet you order. The Arnowrap steel foil is provided in one continuous piece on a cylindrical form (wrapped around a tube) - no folds - no bends.

LIMITED QUANTITY. We have only a limited quantity of this popular Arnowrap Stainless Steel Foil, Wrap, Film.

BUYER: Order by Title (below image) - Email us your order. - List History: LD153. - Price: $19.95 per linear foot.

New old stock (NOS). Real Steel Wrap, Foil, Sheet, Film, one 14-1/2"x 12" piece. We measured thickness at 0.003". NOTE: This steel foil is REAL STEEL - not cheezo painted vinyl to look like steel sold by others, and not aluminum foil or tin foil. Because this is real STEEL - a ferromagnetic metal - it has both electrical AND magnetic shielding properties, which can be critical for some applications. We also find that steel foil is much stronger (tear resistant), more durable, and much more X-Ray penetration resistant than aluminum foil. Endless electrical, mechanical and appliance covering uses: Protects and preserves parts, tools, equipment, recording tape and other magnetic recording media, unexposed film, precious things, collectibles, survival items, medical supplies, ammo, etc. Originally designed to protect dies, bits and other tools, and mechanical parts from abrasion, corrosion, oxidation, scaling, and decarburization. We (www.consumertronics.net) use it in our electronic mind control research as shielding material, and so does Lone Star Consulting, Inc. (www.lonestarconsultinginc.com). One sheet of this steel foil resists X-Rays as much as about 9 sheets of same thickness of aluminum foil.

Sold as one 12" x 14-1/2" piece, as taken from the steel reel or roll as shown.

This was sold to us as Arnowrap stainless steel in a plain box. We cannot verify that this is or is not Arnowrap, so we do not sell it as Arnowrap. It is 50% thicker than the Arnowrap we also sell, therefore, you are getting 50% more steel. Can be cut with good-quality scissors. We sell our popular Arnowrap by the linear foot. Most purchases of our Arnowrap is for one-foot pieces. Therefore, we have precut these into one-foot sizes for quicker shipment. This steel foil is provided on a cylindrical form (wrapped around a tube) - no folds - no bends.

LIMITED QUANTITY. We have only a limited quantity of this popular Steel Foil, Wrap, Film.

BUYER: Order by Title (below image) - Email us your order. - List History: LD153. - Price: $19.95.

RARE HONEYWELL VIDEO HPD8CB 8 PTC
OUTPUT POWER DISTRIBUTION MODULE
HONEYWELL HPD8(CB) POWER DISTRIBUTION CIRCUIT BOARD
PERSONAL SECURITY - HOME SECURITY - BUSINESS SECURITY

New old stock (NOS), in original box with user sheets. Rare Honeywell Video HPD8CB 8 PTC Output Power Distribution Module, Honeywell HPD8(CB) Power Distribution Board, Circuit Board (3" x 4-1/4"). Great for personal security, home security, and business security.

BUYER: Order by Title (below image) - Email us your order. - List History: LD145. - Price: $129.95.

(NOTE: Currently sold out; we are looking for more; if interested, please email us and we will put you on our list for EVD1 electronic vibration security systems but do not call us about them). New old stock (NOS), NIB. Potter Model EVD-1 / EVD1 Electronic Vibration Security System. The Potter EVD-1 system comes with the Potter EVD-1 module, User Manual, Quick Start flyer and original box, as shown. This highly versatile professional industrial-grade vibration detection device is designed to protect safes, vaults, lock boxes, vending machines, ATMs, etc. Can also be used to protect doors, windows, walls, ceilings, floors, safe rooms, equipment, vehicles, tool boxes, etc. - virtually everything that can be compromised by someone either trying to break into it or steal it. Programmable sensitivity using a single rotary switch which employs accumulator technology. The Potter EVD-1 detects all common threats to safes, vaults, lock boxes, vending machines, ATMs, etc. Microprocessor controlled - sophisticated - yet simple to set up, test and operate. Sophisticated signal processing provides great sensitivity while minimizing false alarms. Has remote annunciator and test capabilities. Has an independent tamper output. The Potter Model EVD-1 controller is a vibration detector which detects short duration, large amplitude signals (e.g. from explosions, hammering, chiseling, rough drilling, pry bar attacks, and rough handling), in which case, the EVD1 sends out an alarm. The EVD-1 also detects long duration, small amplitude signals (e.g. from torches, thermic lances, drills, grinders and cutting disks), after 15 seconds of which it sends out an alarm. The EVD-1 will also alarm to switch-open and switch-closed conditions like those commonly used to protect doors and windows in intrusion alarm systems. If someone tries to remove the EVD-1 cover or tries to break into its back, it will activate a tamper alarm. Optional to the Potter EVD-1 is a Remote Test & Annunciator module (RTA, not included). However, its User Manual includes a schematic for its simple RTA, consisting of a few passive electronic components (2 resistors, 2 LEDs, 1 switch), easily made by a technician. 5 x 3-1/2 x 1-1/8.

BUYER: Order by Title (below image) - Email us your order. - List History: LD132. - Price: $99.95.

AURAL PROTECTOR, SOUND HEADSET
MILSPEC HEARING PROTECTOR, EAR MUFFS
MIL-A-23899A (AS), DSA-400-74-D-0157

Used and in very good condition. A very high-quality MILSPEC Hearing Protector Headset / Ear Muffs, called an, "Aural Protector, Sound." Very useful, and a great militaria collectible as well very effective in protecting your ears from both loud sounds and freezing weather. MIL-A-23899A (AS), DSA-400-74-D-0157, by David Clark Co., Inc. Very high quality, padded, adjustable.

BUYER: Order by Title (below image) - Email us your order. - List History: LD1150. - Price: $49.95.

VASOTEC ENALAPRIL MALEATE
PERSONAL SECURITY / PERSONAL SAFETY SYSTEM
MOTION ALARM / INTRUSION DETECTOR w/ LIGHT

Used and in very good condition. High-quality Vasotec Personal Security and Personal Safety Motion Alarm and Intrusion Detector, with Light. This Vasotec alarm system is a great personal defense security and safety system, and has a physical motion detector. Can be hung from a doorknob, hook, or anywhere to physically detect movement, triggering a very loud, high-pitched alarm. By pushing its button (whether turned ON or OFF), it also triggers this very loud, high-pitched alarm for emergencies, such as when being accosted or during a home invasion. It also has a built-in flashlight. This item was once a high-quality give-away from a pharmaceutical company (makers of Vasotec Enalapril Maleate), and is branded as such. Batteries are included.

BUYER: Order by Title (below image) - Email us your order. - List History: LD132. - Price: $19.95.

New (taken out of original package to photograph). Alertek Door Alarm System.

BUYER: Order by Title (below image) - Email us your order. - List History: LD131. - Price: $9.95.

Used and in great condition. Spectorsoft Software, Professional Edition. We have found that Spectorsoft makes very useful and reliable monitoring and security software - highly recommended products. Works with Windows XP, Windows 98, Windows 2000, and Windows Me. Use only on a computer that you own. Buyer assumes full responsibility for all uses. Never install or use this software in an illegal or unethical way.

BUYER: Order by Title (below image) - Email us your order. - List History: LD128. - Price: $89.95.

(Sorry, we recently sold this Transparent Electronic Megaphone; we are looking for more; if interested, please email us). Used, and it works great. 8" long. Lightweight. LEDs also light up when it is used. Runs off of 9-volt radio battery; power is turned ON using a convenient trigger-like switch in the handle. Has several voice disguising selections, so you can use it to produces several different sound effects-type voices for yourself. This megaphone goes way beyond being a toy that produces weird variations of one's voice, but can also be used as a security and privacy device, and to produce special effects for performances (parties, plays, stage, home movies, sports events, etc.), Halloween, etc. With today's increasingly dangerous and chaotic environment, you need to take all the steps you can to protect yourself and family. Changed voice is very understandable. Changes even a high-pitched female or child's voice into a deep, gruff male-like voice. Consider if you are an elder or your children are at home alone and a stranger comes to the door. By responding with this megaphone, the stranger should more likely believe adults are in the home, especially if you switch between its different voices a few times giving the impression that there is more than one adult at home when it may only be one child or elder. Certainly, someone at the door will most likely not be able to recognize the voice inside the home, so it protects your privacy as well, from someone who may be "looking for you." Ideal for home security and personal security.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LS092-R25. - Price: $99.95. S/H: $13.90

This M/C Manufacturing security alarm code tester was used to test the security codes on alarm systems made by the company who also made this inhouse testing device. We have no way of testing it, so we don't know how it works or even if it works, so we sell it "as is" for parts only. Device does power up as shown. 8" x 7" x 3".

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $24.95. S/H: $5, 5 LBS

RARE VERSATILE INTERMATIC LAMP TIMER
MODEL EJ485 / EJ-485 NIGHT SENTRY TIMER SWITCH
EJ485 PROGRAMMABLE TIMER SWITCH

New solid state rare and highly versatile Programmable Intermatic Lamp Timer Model EJ-485 / EJ485 Night Sentry with user manual. Great security device for fooling burglars and home invaders that your home or business is occupied, and for turning small appliances and lamps On and Off as you expect to need them. Programmed for variability so your lamp does not turn On and Off at the exact same time during each day but randomly varies each switching action by several minutes in either direction, similar to how most people vary their schedules by several minutes each day, thereby fooling criminals. Plus, it has a built-in rotational dimmer. Its easily accessible pushbutton switch (PB switch) lets you quickly override programming mode to turn lamps ON and OFF, then returns to programming mode. Double-click the PB switch to instantly switch from programming mode to manual mode; double-click PB switch again and you instantly return to the same programming mode as before. Easy, fast and user-friendly to program, and comes with its User Manual. High quality with heavy-duty cord. 120VAC, 60 Hz, supports 40-300 watts loads (incandescent lamp and purely resistive loads only). Draws 2 watts when load is Off. The Intermatic Lamp Timer Model EJ485 Night Sentry is no longer made although it is a terrific security device for both preventing burglaries and home invasions and for normal activities while you are in your home or business. Our Opinion: One of the best and most versatile timer and switch devices ever made. Helps protect you from thefts, burglaries and home invasions. If you have ever used an Intermatic Night Sentry EJ341, EJ342, EJ381, EJ383 or EJ485 (EJ-341, EJ-342, EJ-381, EJ-383, EJ-485) Programmable Timer Switch, you know just how invaluable these Intermatic Night Sentry Timer Switches are! Why Intermatic discontinued its Night Sentry Timer series is a total mystery to us.

BUYER: Order by Title (below image) - Email us your order. - List History: LD049. - Price: $99.95

RARE INTERMATIC NIGHT SENTRY TIMER SWITCH,
MODEL EJ343 / EJ-343, PROGRAMMABLE TIMING SWITCH, 3-WAY

(Sorry, we sold this rare EJ343 / EJ-343 Intermatic Night Sentry Timer Switch; we are looking for more). Used and in very good working condition. Rare Programmable Intermatic Night Sentry Timing Switch EJ343 / EJ-343, with User Manual (see image), 3-Way Light Switch with built-in Solid State Timer. These Intermatic Night Sentry switches fit into and are wired into an outlet box. 120VAC, 60 Hz, 40-300W loads, incandescent lights only (i.e. resistive loads only). This is a very versatile timing switch, important features of which are: (1) 24-hour repeat cycle period. (2) Easy to program through the pushbutton switch, and can be programmed for up to 24 ON periods and 24 OFF periods. (3) Activation time during each cycle varies at least 7 minutes from the programmed time and at least 15 minutes from the previous day (critical feature because it foils potential thieves, burglars and home invaders casing your home or business; standard light timers don't vary timing so they let criminals know you are gone). (4) Easily used as a simple ON/OFF switch by simply pushing the pushbutton switch once to turn light ON (or OFF) and pushing it again to turn light OFF (or ON). (5) Programming mode can be quickly and easily suspended by double-pressing the pushbutton (to re-activate programming mode, simply double-press the pushbutton again). (6) For power failures of 15 minutes or less, programming is saved. Helps protect you from thefts, burglaries and home invasions. If you have ever used an Intermatic Night Sentry EJ341, EJ342, EJ381, EJ383 or EJ485 (EJ-341, EJ-342, EJ-381, EJ-383, EJ-485) Programmable Timer Switch, you know just how invaluable these Intermatic Night Sentry Timer Switches are! Why Intermatic discontinued its Night Sentry Timer series is a total mystery to us.

BUYER: Order by Title (below image) - Email us your order. - List History: LD135. - Price: $59.95

Used and in very good condition. RCA Light & Motion Detector Switch, with sliding control to set optimum detector direction. These RCA Light & Motion Detector switches fit into and are wired into an outlet box; 120VAC, 60 Hz, incandescent lights only (i.e. resistive loads only). Helps protect you from thefts, burglaries and home invasions.

BUYER: Order by Title (below image) - Email us your order. - List History: LD135. - Price: $8.95

Used and in very good working condition. Intermatic MS1 Timing Switch / Motion Detector Switch, with User Manual (see image), with sliding control to set optimum detector direction. These MS1 Intermatic Timing Switches / Motion Detector Switches fit into and are wired into an outlet box; 120VAC, 60 Hz, 500W maximum, incandescent lights only (i.e. resistive loads only). This is a versatile motion detector with several nice features. Helps protect you from thefts, burglaries and home invasions.

BUYER: Order by Title (below image) - Email us your order. - List History: LD135. - Price: $12.95.

NETWORK BABY-SITTER BABY SAFETY MONITOR
TRANSMITTER & RECEIVER PAIR, USES AC LINE

(Sorry, we recently sold this Network Co. Baby Monitor; we are looking for more; if interested, please email us). This is a used, but high quality older design that works fine. Network Co. baby safety monitor. While most baby monitors today are wireless, this device transmits the baby's cries on the 120 VAC line. These days especially, there is a very big problem with some types of wireless baby monitors: Just about anyone can purchase a set, cruise your neighborhood in his vehicle, and eavesdrop on your baby and you and your family from the street. Wireless models make it much easier for pedophiles, child snatchers, home invaders, rapists, burglars and thieves to surveil, case and stake out your home. Even if the wireless unit is encrypted, the criminal can use a radio scanner and just search for unusual radio activity emanating from your home based on signal strength alone.

BUYER: Order by Title (below image) - Email us your order. - List History: LDxxx. - Price: $99.95. S/H: $12.90

RARE, VINTAGE MSA EXPLOSIMETER,
MINE SAFETY APPLIANCE CO. (Mine Safety Equipment)

Used. Rare, vintage MSA Explosimeter, Mine Safety Appliance Co. The Explosimeter explosives meter is designed to measure and alert upon detection of explosive gases in mines and other confined spaces to minimize loss of life due to mine explosion hazards. We have no way of testing its functions and its case shows a lot of use, and it therefore sold as is. Believed to date back to the early 1940s. A remarkable collectible for the serious collector of mine memorabilia and mind safety memorabilia, especially relevant today with today's very serious mine safety issues.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LS092-R15. - Price: $134.95. S/H: $13.90

New. Power Seal Produce Bag Sealer. Great for sealing plastic bags of all types, including grocery bags (produce bags), trash bags / garbage bags, newspaper bags, candy bags, parts bags, inventory bags, collectible bags / laundry bags, etc. - bags of many types and virtually all sizes. Can also be used to produce tape segments to write on, for example, to identify packages, boxes, plastic bins, crates, medical supply bags, etc. You can use use it to seal other items to, such as small boxes, envelopes, etc., including as a Christmas sealer / gift package sealer, and to attach notes to things. Virtually endless and important uses for the home, hobbies, crafts, sewing, shop, office, retail business, assembly line, field, construction site, camping/fishing/hunting/hiking. You absolutely must have one of these for every one of your major locations and functions. Industrial grade - rugged steel construction - this is not one of those cheapo bag sealers made of plastic or flimsy metal you get from a big discount store - but one designed and built for industrial applications. We bought several of these at an estate sale, not all came in the original box so the box itself may not be included. You get the sealer, plus one new full roll of red tape. Model 7605.

BUYER: Order by Title (below image) - Email us your order. - List History: LD099, LR100-S01. - Price: $17.95. S/H: $9.90

Used, clean and works great. Large hot wax bath for tool preservation, parts preservation, castings, etc. There is a hairline crack on lid as shown but it does not affect function or operation.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LS092-R12. - Price: $79.95. S/H: $12, 12 LB

New in box (NIB). Jones Futurex ENC-400 cipher box encrypting device. Includes power module. Has what looks like two serial ports (db25F), one marked "input" and one "output," and a power port. On the front are LEDs labeled, "reset," "host," "dcd," "cipher" and "power." Inside is a Z8-type microcontroller, an encryption chip, and a 27128 EPROM. Connects and provides encryption between two computers. When plugged into power but not a computer, the power LED lights, and the other 4 LEDs continuously scan. We have not connected it to my computer. Got it at an estate sale. 7.5" X 5.5" X 1.5" Not for export.

BUYER: Order by Title (below image) - Email us your order. - List History: LD049, LS092-R25. - Price: $34.95.

BUYER: Order by Title (below image) - Email us your order. - List History: LD099. - Price: $29.95. S/H: $12.90

New, unused, Echoport alarm system components. Product was discontinued when another company bought the company that made these. Each system comes with a microcontroller MPU board with a socket-mounted 40-pin Microchip PIC16C77-20I/P Microcontroller MPU IC, with a signal processing board that has the Human Thermal Sensor on it, an RF board, a remote control clicker, and its case. We do not know whether or not this system works so We are selling it "as is." we have no reason to believe that any component of this system (including the Human Thermal Sensor (an expensive and hard-to-get part) and the PIC) themselves are bad (as we didn't get the test set-up with them to test the boards or system). The system is very clean in appearance, and we was told that manufacturing stopped only because the company was sold. We are also listing in a separate auction the MPU PC boards only as shown. For this auction, only the shown components are included - power supply, user manual, circuit diagrams, other parts, tech support, etc are not included.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $19.95. S/H: $9.90

ECHOPORT'S ECHOMOTION MODEL EM1000
WIRELESS ASSET PROTECTION SYSTEM
SOPHISTICATED INTRUSION ALARM SYSTEM

New in Box (NIB). Top quality, web-based, versatile, powerful, sophisticated EchoPort alarm system. Box is 8.5" x 6.5" x 4.5". According to its box, to activate this device requires that you subscribe to the EchoPort service. Please note that we are just auctioning off this device - we don't work for or represent EchoPort, and we don't offer their subscription or any other services, software or other hardware (e.g. computer system) that may be required for this device to work.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $24.95

New old stock (NOS) Echoport Controller Boards. Product was discontinued when another company bought the company that made these. Each board comes with a socket-mounted 40-pin Microchip PIC16C77-20I/P Microcontroller MPU IC. We do not know whether or not these boards work, so We are selling them all "as is." we have no reason to believe that any component on the boards (including the PICs) or the boards themselves are bad. The boards are very clean in appearance, and we was told that manufacturing of the completed units was stopped only because the company was sold. We are also listing in a separate auction partially-completed units that come with the detector, this type of board, additional circuitry and the case. Some boards having missing PIC16C77 MPU ICs. This Item consists only the PC boards as shown - power supply, user manual, circuit diagrams, cabling, tech support, etc are not included.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061. - Price: $29.95

This fascinating Dynamo transparent flashlight demonstrates the generation of electrical energy using an electrical generated that converts mechanical energy (i.e. the squeezing of the flashlight handle) into electrical energy, and then into light energy (i.e. the flashlight output). The squeeze handle is connected to a fascinating gear and flywheel assembly which drives the dynamo. There is no battery as the flywheel stores the energy. The faster you squeeze, the faster the flywheel turns, and the greater the intensity of the light and the longer the light stays on after you stop squeezing. Great for classroom and scientific demonstration and science fairs. Also great for field, backup or emergency use as you never need a battery, and therefore, you never have to worry about the timing and cost of battery replacements. Of course, this device can be disassembled by removing the screws and then modified to charge a battery, or to provide some other type of electrical or mechanical function. Comes with a built-in spare bulb. Flashlight is shown upside down in image.

BUYER: Order by Title (below image) - Email us your order. - List History: LD100. - Price: $24.95

(2) 110 DB PIEZO SOUNDERS, SHRILL ALARM SOUNDERS,
100DB PIEZO BEEPERS, 110MA 12VDC

New old stock (NOS). 110db Piezo Sounders / Shrill Piezo Alarm Sounders / Piezo Beepers (110 db output at 1 meter), 12VDC, 110ma. Convenient holes for easy mounting. Also operates with pulsed input, modulated pulse input, rectified input and decaying positive input - great for varying types of sound. These are high quality piezo sounders - not the widely sold small, cheezy very similar-looking sounders. 3.25" dia base, 1.75" tall, 2-7/8" spacing between opposite holes.

BUYER: Order by Title (below image) - Email us your order. - List History: LD128. - Price: $8.95

New with example circuit diagrams. Invensys MCS4000 / MCS-4000 COM-TROL controller remote audio. This very high quality device consists of a stainless steel faceplate that mounts into any standard wall outlet box, a buzzer / sounder, a pushbutton switch and a LED (light-emitting diode). Especially useful for security systems / alarm systems. Output wiring is through a 4-conductor, 22 AWG cable, about 4-feet long. One can wire these just about any way he/she needs to perform a function it can do for the function you need. For example, you can wire the button to activate the buzzer or to shut the buzzer off. The buzzer can be physically removed from the faceplate if you wish. Note that this Item is just the unit shown in the image, and does include a transformer or other electrical parts or circuitry that can be used in conjunction with this control panel.

BUYER: Order by Title (below image) - Email us your order. - List History: LD095. - Price: $24.95.

FISHER & PAYKEL HEALTHCARE
HC220 HUMIDIFIED CPAP SYSTEM / HUMIDIFIER
Plus QUALITY ZIPPERED CARRYING CASE
Plus 2 NEW 6' REUSABLE FLEXIBLE TUBING

New. Fisher & Paykel Healthcare HC220 Humidified CPAP System / Humidifier. Plus quality zippered Carrying Case. Plus 2 new 6' Reusable Flexible Tubing in sealed original bags. NOT SOLD FOR ANY MEDICAL USE OR PURPOSE. The Fisher & Paykel Healthcare HC220 Humidified CPAP system makes a great local humidifier. Great if you work with static sensitive electronic components to prevent electrostatic discharge (ESD) from destroying electronic components and electronic circuits, or anything else ESD-sensitive, such as computers, peripherals, electronic equipment, musical instruments, pets, plants, etc. Great if you are in a confined hot and dry environment to provide localized evaporative cooling for comfort. Great to help preserve important papers, collectibles, works of art, furniture, furs, fresh vegetables, etc. in a dry climate.

BUYER: Order by Title (below image) - Email us your order. - List History: LD132. - Price: $395.95 complete, S/H: $24.90 Everything except the zippered carrying case, $349.95. S/H: $22.90

RARE, VINTAGE TOILET PHONE /
TOILET RADIO, BATHROOM PHONE / BATHROOM RADIO
TOILET PAPER ROLL HOLDER, by HOPESONIC

Used and works great. Toilet paper roll holder with built-in radio and telephone. Made by Hopesonic. Radio is AM and FM. Battery-operated, so no need to find an AC outlet for it or risk that it might get wet and shock you. What a terrific idea! Incredibly versatile and useful. You hang this next to your toilet like you would any other toilet paper holder. The matching telephone rests on the platform on the top of it. NOTE: The phone is not connected to the main body but directly to a phone line, so you can if you want substitute the provided corded phone with a no-cradle cordless phone or cellular phone and/or Ipod or Blackberry, and/or tiny TV or notebook computer, and/or keys, and/or tools, and/or your self-defense hardware, and/or whatever you wish whenever you wish as long as it all fits on top and total accessory weight is under about 10 lbs. Or use its surface to hold a book or a glass of your Metamucil. You can even securely attach your cellular phone battery charger/cradle on it using velcro and just set the cellphone there for a quick charge or for an overnight charge if you wish.

BUYER: Order by Title (below image) - Email us your order. - List History: LD061, LS092-R10. - Price: $99.95. S/H: $17.90

WINDOW COPPER FOIL STRIPPING ROLL:
ELECTRONICS, SHOP, SECURITY, ALARMS, CRAFTS,
JEWELRY, SIGNS, VEHICLES, SELF-ADHESIVE, 1/4"

Full, new rolls of self-adhesive copper window foil stripping / copper glass foil stripping / copper film is peel-off self sticking copper foil, made by 3M. The peel & stick copper foil roll is 1/4" wide and thin - typical of security copper foil for windows, glass sliding doors and skylights to detect glass breakage for burglar alarm systems / intrusion security systems. Will also work on plexiglass and other plastics, and smooth wood. The roll is not labeled as to how long the copper stripping foil strip is and we have not unrolled it to measure it, but the rolls are new and appears to be 100 feet per roll.

Copper is becoming increasingly scarce and expensive, and this Item has many important uses, including but not limited to: (1) Alarm and security systems (its big advantage over aluminum stripping is that it can be soldered). (2) Electronic uses, including power buses, ground buses, microwave antennas, microwave inductors, RF coils, metal detector coils, tesla coil primary windings, other high-current coils / high-power coils / huge winding ratio transformers, ground planes for electronic circuits, electronic shielding and crack sealing, converting lengths of unshielded wire(s) into shielded cable, high-current electromagnetic coils and transformers, static electric dischargers (I use some around my computer keyboards), and as general substitute for wire, especially where self-sticking conductor or flat conductor is important (for example, you can run it along a wall without without using using nails to attach it), etc. (3) Crafts and Christmas decorations and other decorations. (4) Sign-making, display making, tags, labels and other art. (5) Striping for vehicles (car striping). (6) Striping for homes (home striping, e.g. to decorate walls and furniture). (7) Jewelry. (8) Decorate ceramics. (9) Decorate models. (10) Stained glass window manufacture. (11) Secure tape that won't stretch and is much stronger to breaking to bundle heavier items together.

BUYER: Order by Title (below image) - Email us your order. - List History:
(1) COPPER FOIL ROLL: LD093, LR095-S01, LR102-S01. - Price: $10.95
(5) COPPER FOIL ROLLS: LD093, LR095-S01, LR102-S01. - Price: $49.95. S/H: $14.90

WINDOW COPPER FOIL STRIPPING ROLL:
ELECTRONICS, SHOP, SECURITY, ALARMS, CRAFTS,
JEWELRY, SIGNS, VEHICLES, SELF-ADHESIVE, 3M, 1.0"

Full, new 3M rolls of self-adhesive copper window foil stripping / copper glass foil stripping / copper film is peel-off self sticking copper foil, made by 3M. The peel & stick copper foil roll is 1.0" wide and thin - typical of security copper foil for windows, glass sliding doors and skylights to detect glass breakage for burglar alarm systems / intrusion security systems. Will also work on plexiglass and other plastics, and smooth wood. The roll is 54 feet long.

BUYER: Order by Title (below image) - Email us your order. - List History:
(1) COPPER FOIL ROLL: LD111, LR095-S01, LR102-S01. - Price: $14.95
(5) COPPER FOIL ROLLS: LD111, LR095-S01, LR102-S01. - Price: $69.95. S/H: $7, 7 lbs

(10) PILL BATTERY HOLDERS / COIN BATTERY HOLDERS /
BUTTON BATTERY HOLDERS / ACTUATORS / SWITCHES

New old stock (NOS) black plastic pill battery holders / coin battery holders / button battery holders / actuator switches. Left image of pill battery holder is top of battery holder and right image is the bottom showing the two solderable connections. The pill battery holder will hold any pill battery / coin battery / button battery, capacitor or other similarly-shaped object upto 7/8" in diameter and upto about 3/16" thick. Great for electronic designers for powering small, compact and low-power circuits. These pill battery holders also serve as great actuators / switches - especially if you need a one time switch or a pin-pull switch / actuator. The top of battery holder has 5 castle-like notches - one directly in front of contact opening - where a small piece of non-conductive wood, plastic or cardstock (e.g. toothpick or popsicle stick piece) can be placed between the battery holder contacts to keep them apart and open-circuit using this notch as the guide, and then pulled out to short the contacts together to perform some kind of electronic function. For examples, the battery holder could be used as a safety switch when someone removes the cover of your electronic box, or as pin-pull personal alarm system or trip alarm system - you pull the nonconductive "pin" between the actuator contacts to activate an alarm the attacker can't easily switch off or bypass. Also these are great for testing pill batteries - insert the pill battery, then use your voltmeter to measure its voltage across the battery holder contacts (meter not included). And to compactly store unused pill batteries.

BUYER: Order by Title (below image) - Email us your order. - List History: LD107. - Price: $9.95.

9 VOLT BATTERY HOLDERS / 9 VOLT BATTERY CLIPS
METAL CLIPS FOR 9-VOLT RADIO BATTERIES

New old stock (NOS). No more cheezy, expensive, flimsy and plastic 9-volt battery clips/9-volt battery holders for you! These high-quality, well-manufactured, rugged aluminum or steel industrial-grade 9 VDC battery (9V radio battery) clips/holders, while originally not designed to hold batteries but for a different use, these clips securely and snugly hold 9-volt batteries into place. We use a ton of these highly versatile 9V battery holders / 9V battery clips in electronic equipment we build, often to replace existing 9VDC battery holders / 9VDC battery clips in equipment used in our electronic laboratories and shops, and for a very wide variety of other holding, securing, hanging, guide, joining applications for the many other parts, tools, prototype boards, rods, small pipes and cabling which conveniently fit into them.

These 9-volt battery clips can mount batteries in any orientation, and adapt to all kinds of battery clip mounting constraints found in equipment: They can be mounted in any of the 3 axes, and they can hold the battery or other part either on its side or its end. There is a bottom tab in the middle of both sides of the holder, about 1/2" x 1/2" each. Either or both of these tabs can be drilled or punched for a mounting screw or pop rivet hole to mount them on the side or bottom of a project box. And either or both tabs or sides can also be bent out at 90 degrees for flat mounting on the side or bottom of a chassis. And either or both tabs or sides can be sawed off or even broken off with pliers (by bending the tabs up and down several times to induce metal fatigue). The battery clip center or ends can also be punched or drilled for mounting a pop rivet or screw to mount it without the tabs. Or the battery holder can be simply cemented into place or tied in place using tiewrap.

By squeezing in the holder/clip sides, you can considerably stiffen the grip on the battery or other part to prevent it from falling out under even rugged handling of your enclosure (we even mounted one as a test to the underside of a car and it kept the battery in place for 6 months until we removed it); and by pulling the sides slightly more apart, you can considerably loosen the grip on the battery or other part for more easy placement of it. Changing the distances between the sides also allows the clip to be used with parts of varying sizes and shapes. For thinner items, you can use wood, plastic, rubber or cardstock spacers to help secure electronic parts and other parts using these holders. And for thicker items, you can cut off or bend away one side of each of two holders, and then space the holders apart the right distance to accommodate the thicker item.

These holders are so versatile, you should keep at least several in each of your work areas. Aside from holding not only batteries but numerous other small parts, two or more can be used to securely hold, separate and/or route long items, like rods, pipes, tubing, cabling and wiring. And they can be easily used to secure adjacent flat items together in several ways. They are very versatile for many, many uses.

Battery and battery terminals (i.e. battery connectors) are not included. CAUTION: As with all items made from sheet metal, handle with care as getting cuts is always possible if you are not careful, and always of course work safely, including using gloves and protective eyewear, facewear, apron, etc.

We have seen flimsy commercial, non-versatile plastic battery holders sold in electronic stores for 5+ times what we sell these new battery holders for. Unfortunately, apparently because we sell this Item to try to save electronic enthusiasts lots of money in their purchases of battery holders or simply out of jealousy, some have shown hostility towards us for selling this Item in particular. NOTE: As with all Items we sell, this Item is sold strictly under our policies on our policies.htm webpage. If you do not fully accept any of these policies, do not buy this Item. All of our battery holders are on our power-ics.htm webpage.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? IF INTERESTED IN BUYING MORE OF THESE, PLEASE EMAIL US.

BUYER: Order by Title (below image) - Email us your order. - List History:
(10) BATTERY HOLDERS: LD061, LR095-S01, LR099-S01. - Price: $5.95
(25) BATTERY HOLDERS: LD061, LR095-S01, LR099-S01. - Price: $12.95
(50) BATTERY HOLDERS: LD061, LR095-S01, LR099-S01. - Price: $22.95. S/H: $9.90
(100) BATTERY HOLDERS: LD061, LR095-S01, LR099-S01. - Price: $44.95. S/H: $13.90

HIGH-TECH EXPERIENCED PROFESSIONALISM: Many "high-tech business" owners and their employees today are clearly woefully ignorant of the high technologies they sell (including some giant electronic parts houses!). ABQ Techzonics of Albuquerque, NM, USA, is owned by John Williams, M.S.E.E. Mr. Williams is a former Senior Electronics Design Engineer (Lockheed EMSCO); Professor of Computer Science (New Mexico State University (NMSU)); Electronics Weapons Design Engineer (U.S. Navy, U.S. Air Force); Health Physicist (National Institutes of Health (NIH)), etc. Williams is also currently President of Lone Star Consulting, Inc. and CEO of Consumertronics.net. While we don't know everything about everything tech (no one does), we have a high level of expertise. We sell a lot of electronic components / electrical components. Most of these electronic components / electrical components are small electronic parts / electrical parts, such as integrated circuits, optical devices, transistors, rectifiers, diodes, transformers, inductors, capacitors, resistors, displays, switches, relays, crystals, oscillators, transducers, sensors, prototyping, connectors, fuses, wire/cable, power components, etc., as well as some larger electronic parts / electrical parts and electronic test equipment, scientific equipment and industrial equipment / parts, electrical equipment / electronic equipment in general, tools, mounting hardware parts, and special materials. And we also buy and trade these types of items (Trade & Buy Offers). And unlike most electrical / electronic components sellers, many of the electrical / electronic component, etc. lots we buy we set aside some of the electrical / electronic parts, etc. for our own electronic projects and research. We sell those electrical / electronic parts, etc. we don't use. Our suppliers know that if their electrical / electronic parts, electronic test equipment, etc. aren't excellent, good chance we will discover it and they'll hear about it!

ABQ TECHZONICS (Albuquerque, NM) SELLS, BUYS & TRADES: ELECTRONIC COMPONENTS, ELECTRONIC PARTS, ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Thermistors, Crystals, Oscillators, Sensors, Transducers, Optoelectronics, Prototyping, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, RF, Microwave, Electronic Modules, Power Adapters, Power Supplies, other Electronic Parts / Electronic Components / Electronic Subassemblies / Electronic Assemblies. EQUIPMENT, DEVICES: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Mechanics Tools, Precision Tools, Tool Chests. MORE TECH STUFF: Commercial/Industrial/Scientific/Laboratory Valves, Fittings, Hardware Parts, Mechanical Parts, Supplies, Special Materials, Personal Security, Survival (Survivalists / Preppers), Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Books, Manuals, Software, Collectibles.

SOURCES OF ITEMS ABQ TECHZONICS SELLS: Surplus, online auctions, hamfests, private sales, business moving sales, overstocks, job lots, wholesale lots, estate sales, garage sales, thrift shops, charity auctions, flea markets, hardware trades, abandoned storage, lost & found property sales, discontinued items, obsolete items, warehouse inventory updates, excess inventories, liquidations, business closures and out-of-business sales, foreclosure sales, bankruptcies, government auctions / government sales, new salvage sales, and other sources for integrated circuits (ICs), electronic parts / electronic components, hardware, special materials, etc., Albuquerque, NM area preferred but will buy from anywhere. ABQ Techzonics is both a wholesale sellers/wholesale traders/wholesale buyers and retail sellers/retail traders/retail buyers, largely depending on quantity.

NOTE: By policy, we never recommend for or against, approve or disapprove, sponsor, endorse, support, guarantee, or take any responsibility for any of the content of any non-Consumertronics webpage, website, advertisement, publication or other statement EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. And by policy, we never recommend for or against, approve or disapprove, sponsor, endorse, support, guarantee, or assume any liability or any other responsibility for any non-Consumertronics company, product or service EVEN IF WE HAVE PROVIDED A HOTLINK TO IT and EVEN IF WE HAVE DISCUSSED IT OR INFORMED YOU ABOUT IT on a webpage, or by phone, email, USPS mail, or by any other means of communications. Everything we sell is sold strictly for legal utility, educational and/or entertainment purposes only, and is based on our policies on our policies.htm webpage.
Test Source Links only (no visitor use): Source-1, Source-2, Source-3, Source-4, Source-5, Source-6, Source-7, Source-10, Source-11

NOTE: Money Transfer Services (MTS) and all business names referred to on this website (other than ABQ Techzonics and Consumertronics) are referred to only as totally independent sources of services or products our Clients may avail themselves to if they so choose, and to identify the manufacturers of products sold herein (e.g. "Radio Shack scanner"). These businesses have identities protected by their own unique trademarks and service marks. We are not in any way agents nor representative of them, nor in business with them (e.g. we are not a MTS, nor outlets nor franchises of them). Nor do we state or imply in any way that these businesses are a part of ABQ Techzonics nor Consumertronics, nor do they endorse nor support any ABQ Techzonics or Consumertronics product, service, policy, activity or operation. Nor do we state or imply in any way that ABQ Techzonics or Consumertronics are a part of these businesses, nor do we endorse nor support any of these businesses products, services, policies, activities or operations.

by www.consumertronics.net P. O. Box 23097, Albuquerque, NM 87192 Click => HOW TO ORDER, read, then Hit Browser Back-Button to return here Check, Money Order, PayPal (see below), Money Transfer Services (MTS), Trade 2024 Catalog Webpages now on 1G Flash Drive (only $39 (includes USA S/H))	ABQ Techzonics Albuquerque, NM Sitemap	Techzonics Email: wizguru* ...tell your friends! policies.htm
USA site - No cookies - No spyware - No adware - No trojans - No viruses - No worms - No spam - No pop-ups We Respect Your Privacy - We do NOT Monitor Your Shopping nor Track You Online, nor Share Your Data -------------------------- *Please do NOT Phone Us. Email Us Instead. We are Inundated by Scam Phone Calls with Fake Caller ID #s. Put "Inquiry" in Subject Line