ABQ-Techzonics Power ICs,Voltage Regulators,Surge Protectors,Fuses

ABQ-Techzonics Earthshaking Online Tech Superstore
We Seriously Consider all Reasonable Best Offers, Price Negotiations, Trade Offers!

FREE CAPACITORS, FREE RESISTORS - Stock Up Now! (Limited Time Offer)
Your Choice - No Additional S/H - For each Order Increment of $25 from This Webpage
(e.g. $75 Order => 3 FREE Packets!!) Approx. Regular Prices (+S/H) - What YOU Save!: CAPs $4, RESs $3
We Will Seriously Consider Other Capacitors & Resistors In Stock You Suggest Instead
CAPACITORS and RESISTORS can be Ordered Separately in Many Other Quantities and Sizes
FREE CAPACITORS (Packet): 20ea 1,000番, 6.3V, Electro., Radial; 10ea 100番, 10V, Tant., Radial; 20ea 47番, 6V, Tant., Axial; 20ea 1番, 35V, Tant., Radial; 100ea 0.1番, 500V, SMT; 100ea 47nf, 50V, Ceramic, Axial
FREE RESISTORS (100ea Packet), Axial: 1%, 1/4W: 33ohm; 39ohm; 1.065Kohm; 2.21Kohm; 150Kohm. 5%, 1/4W: 330ohm; 2.2Kohm. 1%, 1/8W: 47.5Kohm.

POWER SEMICONDUCTORs (especially POWER ICs and POWER SUPPLY ICs), VOLTAGE REGULATORs, VOLTAGE REFERENCEs, SURGE PROTECTORs, FUSEs, POWER SUPPLIES, MOVs, THERMISTORs, HEAT SINKs

Power Semiconductors, Power Supply ICs, other Power ICs, Voltage Regulators, Voltage Standards, Voltage References, DC-DC Converters, Voltage Monitors, Current Regulators, Microprocessor Power Supply Supervisors; Transient Suppressors, Surge Protectors, Lightning Arrestors, Varistors, MOVs, Transil Diodes, Gas Discharge Tubes (GDTs), Fuses; NTC / PTC Thermistors, Thermocouples, Thermostats, Heat Sinks, Electronic Heaters, Electronic Coolers; Full-Wave Rectifiers (FWRs), Bridge Rectifiers, Power Supplies; Digital ICs, Analog ICs (Linear ICs), Hybrid ICs, Bipolar, CMOS, TTL, MOSFET, FET, Vintage ICs (for battery holders, battery connectors, etc., see our Connectors webpage)
We sell, trade, buy new integrated circuits, including modern ICs, discontinued ICs and obsolete ICs, including popular ICs, rare ICs, vintage ICs, special application ICs and collectible ICs.

SEE OUR SUPERSTORE webpages FOR: ELECTRONIC COMPONENTS / ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Crystals, Oscillators, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, Power, other Electronic Parts / Electronic Components. EQUIPMENT: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Tool Chests. MORE TECH STUFF: Scientific/Industrial Valves, Fittings, Security, Survival, Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Collectibles - Hardware, Devices, Parts, Special Materials, Books, Manuals, Software

Consumertronics.net, P. O. Box 23097, Albuquerque, NM 87192
(8400 Menaul Blvd, Ste Suite A-199, Albuquerque, NM 87112)

Contact: wizguru@consumertronics.net
Voice: 505-321-1034 (9-5 MST, M-F)
Please EMAIL US for all Orders, Inquiries and Questions

SEARCH TIPS & EQUIVALENT ELECTRONIC PARTS: Please use top-right search box or your Browser Search / Find feature to locate the specific Items of interest or just browse webpage. Because of huge variations in Power IC part #s, Power ICs are also listed by their base part #s, so your first search for a part should be by its base part # (e.g. 7915 for LM79L15ACM) - if we sell any variation of the part #, you'll find it, then scroll down from there (the base or core part # is the number which remains after removing all prefix and suffix letters and sometimes middle letters). We listed many electronic parts by more than one name and name variation (e.g. "LM2575T-12", "LM2575", "LM 2575T" and "LM 2575", etc.). There are many equivalent ICs, and many ICs which have the same pinouts but while not exactly equivalent can in some circuit designs substitute and even improve over the other - if you can't find your exact electronic parts, search for the part's function and functional variations (e.g. "adjustable voltage regulator"). Top-right search box finds parts even if you only have small snippet of name or part # - even if in middle of name/part #. If you still can't find your electronic parts, try by other name and part # variations. If you still can't find electronic parts then search our other likely webpages, see SITEMAP for links. Your efforts might save you money as some electronic parts / electrical parts are now either unavailable or rare and costly - if you can find more common electronic part equivalents and/or buy in quantity, savings of 90+% per part are possible, and you can breathe new life into older designs and equipment. For integrated circuits, the main specs to look for is based on the base part #, look for these specifications from the electronic part's datasheet, and then find electronic parts with matching critical datasheet specs (usually, not all specs are critical). Also look for Milspec, ECG, NTE and other electronic parts equivalents, and vice-versa.

ITEM SPECIFICATIONS - DATASHEETS & CIRCUIT DESIGNS: For datasheets for integrated circuits, transistors, rectifiers, diodes, and most other electronic parts, we recommend the following great electronic parts database websites: Alldatasheet.com, Datasheet Archive, and DatasheetCatalog.com. Electronic design tutorials, electronic applications, specific circuit designs and even patent data can be found using Google, Yahoo, MSN, etc., as well as many books filled with electronic parts datasheets and circuit designs. While we have tried to be 100% accurate in our descriptions, please freely let us know any errors or omissions made herein, preferably by providing us a pdf URL for the specific Item either from the manufacturer or from an Online datasheet database, such as, Alldatasheet.com, Datasheet Archive, Datasheet Catalog.com.

ITEM CONDITIONS: Unless otherwise indicated, all items described on this webpage are new old stock (NOS) and never used. We often buy and trade for new electronic parts, electronic test equipment, and other items of the types described herein, preferably in larger quantities, some which we set aside for our own electronic laboratory, shop and other inventories and some we resell herein. Should you have items to sell or trade of these types, please let us know via email. All small parts and materials we acquire for resale herein must be new, but we often buy and trade for used large parts, tools, equipment and books in very good conditions, which we describe as "used" for those we resell. Please email us (please don't call as we are often in our labs), use email Subject: "Buy/Sell/Trade Inquiry."

DESCRIPTIONS & IMAGES: Unlike many Online stores, our goal is to always provide you clear and correct item images, and accurate and reasonably complete item descriptions. While we have tried to be 100% accurate in our descriptions and images, please freely let us know of any errors or omissions made herein, for example, by emailing us URLs to relevant datasheets. While images usually help, most of the items we sell are already well known. If any of our descriptions or images are missing, incomplete or inaccurate and this affects your purchase decision, please email us (please don't phone; put "Need Better Info for Item" in email Subject Line) so we can make reasonable corrections. Many of our images of electrical and electronic hardware do not show all of the leads or cabling which the actual items have so that we can provide bigger and clearer images of the body of the items to better show part numbers, labeling, features and cosmetic conditions.

POLICIES: Unless explicitly stated otherwise on this webpage, all applicable policies are found at: www.consumertronics.net/policies.htm.

PAYMENTS: We will seriously consider all reasonable trade offers, counter offers, and combined shipment discounts (for trade offers, see below). Simply provide us a list of what you want, add up the prices with the S/H, and then send us your list and that amount (include name, ship. address, phone # and email address), or use one of our Consumertronics Online Order Forms. Payment by check, money order, Western Union (WU), PayPal, Moneygram and Trade are all OK within the restrictions stated herein: (1) U.S. Postal Money Order (PMO), Canadian PMO (made out in $ U.S.), Western Union, Moneygram and PayPal are considered to be same-as-cash by us, and we can ship right away. (2) All other checks and MOs require 10+ days to clear. (3) All foreign PayPal over $100 and all non-foreign PayPal over $300 require prior, explicit, written approval by us; all PayPal over $50 requires verifiable name, address and phone #. (4) No CODs, "on approvals" or any other type of payment not explicitly OKed herein is permitted. (5) For our good buyers from here or anywhere else, we are more flexible in types of payments. (6) Make payment to: "Consumertronics" (for WU and Moneygram, payment is made to: "John J. Williams"; for PayPal, payment is made to: "wizguru@consumertronics.net"). (7) Please pay the exact full amount of your purchase + S/H (email us if you are not sure) - if you overpay by more than 5% or $100 (whichever is less), allow 90-120 days for us to refund you difference due to overpayment scams. (8) We reserve the right to refuse any order, form of payment, or buyer-imposed sale or shipping conditions without prior notice or liability. Some items may be restricted by government regulations for export, and Buyers assume all liability for the legality of our shipments to them and their purchases, possessions and uses of the items we ship to them.

PRICING: We are flexible in our prices and S/H - especially for our good customers and for quantity and multi-item orders - we want to be fair to both you and us. Prices are stated at the end of "Seller Codes" line for each Item. We determined Item price based on prices of similar items found Online and in stores. In cases of no clear Online or store price consensus, other sources were used. If our price is too high for any item we sell, we will seriously consider reducing our price - especially if you document that others are selling this same or equivalent item at lower prices in the quantity you need - our goal is to beat our competitors! For many items, we are not limited to the quantities shown - should you need more and we have what you need available, we will seriously consider your offer. By buying an item in quantity and/or more than one item, you much reduce your S/H costs per unit. In most cases we can also do less quantity if your total order is $10+ (+S/H) and average price of your items is $5+ each. Just email us with your needs, your counter-offers, and/or items you want to trade.

SPECIAL DISCOUNTS: Until ___________, 2010, you may take _______% off of the price of any and all Items described on this webpage in which the word "Firm" does not appear next to the price.

SPECIAL QUANTITY DEALS SAVES YOU MONEY: Larger quantity (and multiple Item and local pickup and delivery) sales almost always result in per-unit $Item-plus-S/H savings for YOU! We have some Items in much larger quantities than offered above as usually stated in Item description. Yes, if we have the quantity to meet your higher quantity needs, we will seriously consider any reasonable and mutually fair offer you propose which will not only get you the quantity you need but at a substantial savings to you in per unit price and per unit S/H costs (quantity evenly divisible by 10 or 25). We will seriously consider underselling all other major sellers of the same items.

WANTED: ITEMS FOR TRADE: Who doesn't want to save cash these days! If you want to trade any Item(s) of the types that we sell on this website, we will consider the trade. You save money and get rid of Item(s) you need less than Items we offer. Email us a complete description of your Item(s), including Item make and model/part numbers, conditions, quantities, defects. Put in email Subject Line: "Item for Trade Inquiry." Note that we do not want old TVs,VCRs, home systems, computers, monitors or peripherals, and all items must be clean and safe to ship and handle. Don't ship us anything until we first approve of the trade in writing.

SHIPPING & HANDLING: About 75% of the Items ABQ-Techzonics sells ships at 1 lb or less, so we charge no Handling (Continental USA) for them. Where S/H is stated (end of "Seller Codes" line), it is stated for CONTINENTAL USA ORDERS only (for NON-CONTINENTAL USA ORDERS, S/H is 1.5 times greater, for CANADA 1.75 times greater, for all other FOREIGN ORDERS, please inquire). Where S/H is not stated at end of Seller Codes, the following S/H charges apply:

CONTINENTAL USA ORDERS: 1 - 24 ICs: $5.90 (2) 25-99 ICs: $7.90. (3) 100 - 249 ICs: $8.90. (4) 250 - 499 ICs: $9.90. (5) 500+ ICs: Shipping is based on actual Shipping charge; Handling is 1 cent per IC; min S/H is $10.

NON-CONTINENTAL USA ORDERS: 1-499 ICs: S/H is 1.5 times Continental USA S/H above. For 500+ ICs,Shipping is based on actual Shipping charge; Handling is 1.5 cents per IC; min S/H is $15.

FOREIGN ORDERS: Shipping is based on actual Shipping charge; min foreign Air Mail S/H is $9.90 Canada, and $17.90 all other foreign addresses, so please order as much as you can to save substantial foreign S/H.

MULTIPLE ITEMS SAVE YOU MUCH S/H CHARGES!: S/H is now expensive and shippers are constantly increasing their rates; to save YOU much in S/H, please order all that you need from us today from this webpage and all of our other webpages, pay for them all in full in one payment to be shipped all together to same address. ALL USA & CANADA ORDERS: You pay full S/H for your most S/H-costly Item plus half S/H for each and every other Item you buy. ALL OTHER FOREIGN ORDERS: Please inquire.

SHIPPING METHOD: For USA, we usually use Priority Mail or Media Mail (if book or manual) if Shipping charge is less than 75% of the S/H stated above. All foreign Shipping is by Air Mail. Other forms of USA shipping, including UPS, FedEx, Overnight, Second Day Air, Insured, etc. are usually OK but the S/H will be higher. We will not charge shipping to Buyer's shipper account.

ANTISTATIC PACKAGING: All Items which are electrostatically sensitive (e.g. CMOS, FET, MOSFET or otherwise known to be static electricity sensitive) are shipped in antistatic tubes, antistatic foam, antistatic reel tape, antistatic tray, and/or antistatic tube.

Thanks for visiting our ABQ-Techzonics website. Best of successes. John J. Williams, M.S.E.E., Consumertronics.net

(25) Linear Technology LT 1308 / LT1308CS8 -
1-Cell High Current Micropower 600kHz Boost DC/DC Converter
5V @ 1A from 1 Li-Ion Cell or 3.3V @ 300ma from 1 Nicad Cell!

New old stock (NOS) Linear Technology LT1308 Single-Cell High Current Boost DC/DC Converter SMT/SMD ICs. We bought a ton of reels filled with 10,000s of SMT/SMD ICs, transistors, diodes, resistors, capacitors, etc. of numerous parts types (check our other webpages). We are selling most of these reels as most of the work we do is with DIP/DIL ICs.

If you need 5VDC (1 A) or 3.3VDC (300 mA) power at significant current but are limited to a single-cell battery source, the LT 1308 voltage regulator is an absolute must! You are no longer forced to buy rare and ultra-expensive LM3909 ICs just to get amplifier and oscillator functions using 1-battery power! Shipped in antistatic reel tape, tube or foam.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(2) WIDE VOLTAGE RANGE
VOLTAGE DOUBLER BOOST VOLTAGE REGULATORs /
2X STEP-UP VOLTAGE REGULATORs / BOOST DC/DC CONVERTERs /
STEP-UP DC/DC CONVERTERs (OUTPUT VOLTAGEs 2.7 VDC TO 40 VDC) /
LOW FREQUENCY AMPLIFIER ICs

New old stock (NOS), DIP/DIL ICs. These highly versatile and compact boost voltage regulator / step-up voltage regulator / boost DC/DC converter / step-up DC/DC converter ICs are very useful. These wide-voltage-range voltage-doubler DC-to-DC converters double the 1.5V - 20.0V input DC voltages to 2.68V - 40.0V output DC voltages (output VDC is slightly less than double input voltages for less than 10VDC input). From our measurements (tested with a 1K ohm output load resistor): 1.5VDC input => 2.68VDC (3 VDC nominal) output, 3.0VDC => 5.62VDC (6 VDC nominal), 5.0VDC => 9.56VDC (10 VDC nominal), 6.0VDC => 11.62VDC (12 VDC nominal), 9.0VDC => 17.8VDC (18 VDC nominal), 10VDC => 20VDC, 12VDC => 24VDC, 15VDC => 30VDC, 18VDC => 36VDC, 20VDC => 40VDC. Note that 20VDC input voltage was highest voltage we use them for continuous use, both higher input and output voltages were achieved in short-term tests and may also be OK for continuous use. Output continuous power rating tested by us was 2 watts (enough to power several ICs). 1.5VDC => 2.7VDC means that with one AAA, AA, C, D, Nicad, Lithium-ion cell battery you can power low voltage ICs (e.g. LM358, NE532, WP901) without using an expensive and limited LM3909. 5.0VDC => 9.6 VDC means you can use a 5VDC power supply (e.g. TTL power supply) to also power 40xxx CMOS and other higher voltage ICs and transistors. Furthermore, by using two of these boost voltage regulators, you can produce 4X +V or -V output voltages or 2X ±V output voltages to within 1% of each other (inputs wired in parallel, outputs wired in series). These versatile and compact boost DC voltage regulators/converters replace our previous need to maintain a stock of dozen typical DC boost voltage regulators/converters with each type strictly limited to specific voltages.

These voltage-doubler boost DC/DC converters are about the same length and width of a 24-pin DIP IC and about 1/2" thick. They are each made with 23 pins total (0.1" apart; 1 pin omitted by its maker), of which only 4 pin pairs are used - 1 pair on one end and 3 pair on other end (the rest of the pins test open-circuit and have no known function, we usually clip them off). Each opposite sets of pins are identical (e.g. pins 1 and 24 are same, pins 10 and 15 are same, pins 11 and 14 are same, pins 12 and 13 are same), so if you wish you can actually install this IC on either of its sides as a SIP. Since the input and output pins are at the ends of the IC, you can mount other parts, preferably on backside of your circuit board (e.g. a DIP IC of 16 total pins fits perfectly) easily inside the footprint of the DC-to-DC boost converter IC). The DIP pins on these boost converter ICs extend 3/16" below the body and there is recessed area the general size and shape of a 16-pin DIP IC on the underside center; you can also conceal another thin IC(s) and/or other thin electronic parts underneath the DC boost converter IC's body (consider heat dissipation issues when doing this) to hide some of your circuitry from reverse engineering.

AMPLIFIER APPLICATIONS: Since the DC/DC boost converter IC's input and output pins are electrically isolated from each other, you can also use these step-up DC converters for isolation applications and to eliminate noisy ground loops and 50 Hz / 60 Hz and RFI interferences. No doubt they contain a built-in transformer to provide this isolation, which means that the device must chop-up the DC voltage to a frequency which the transformer will work at. We have found that these ICs are not limited to DC inputs, but will also boost low-frequency AC inputs upto 10 Hz like a constant gain opamp (with no feedback). Consequently, we find these boost converter ICs very useful as low-pass filters and low-frequency DC-coupled, gain=2 amplifiers (i.e. "G=2 opamps") - especially useful for some transducers and sensors and infrasonic applications. Because these ICs are essentially chopper amplifiers, you won't likely need a fresnel lens or rotating fan for thermal sensor applications. Since its upper frequency is about 10 Hz, it is very immune to 50Hz / 60Hz interference as well as RFI. So if you also need isolated, DC-coupled, chopper amplifier-type, gain=2 amplifiers, these ICs may be ideal for you.

We do not know what the actual specs are for these unmarked and unknown ICs, so we identify them with our own proprietary markings in our designs (protects our designs from reverse engineering). And because we cannot identify their actual part #, we cannot guarantee their specs - we can say that we have used them for various applications described herein and they have always worked fine. If these boost DC converters / boost regulators / low-frequency amplifiers are what you need, buy this Item, test them at your end, and should you like them, let us know and we will list herein any quantity up to 400 ICs at both reduced per IC cost and per IC S/H cost (cost reductions depend on quantity ordered) for you to buy what you need. We include pin-outs when shipped. These boost DC converters/regulators / step-up DC converters/regulators ICs are shipped in antistatic tube or foam.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

LAS1612 / LAS 1612 PRECISION 12VDC VOLTAGE REGULATOR IC
12VDC, 2A, 20 WATTS, Lambda Semiconductor, RARE

New old stock (NOS). Rare LAS1612 / LAS 1612 12 VDC Precision Voltage Regulator, 2 Amps, 20 Watts, Lamda Semiconductor.

New old stock (NOS), SMT/SMD. LM1117IMP-5.0 are LM1117-type 5 Volt Voltage Regulators, 1A, National Semiconductor. LM1117 Voltage Regulator ICs shipped in antistatic reel tape.

(10) MAX1771CSA / MAX 1771, MAX1771-type
+12V or ADJUSTABLE VOLTAGE REGULATOR ICs
HIGH-EFFICIENCY, LOW-IQ, STEP-UP DC-DC CONTROLLERs
BOOST VOLTAGE REGULATORS, Maxim Integrated Products

New old stock (NOS) SMT/SMD ICs. MAX1771CSA / MAX 1771 MAX1771-type 12VDC or Adjustable, High-Efficiency, Low IQ, Step-Up DC-DC Controllers (Boost Regulators), Maxim Integrated Products. The MAX1771 Boost DC-DC converter can be configured as either a 12VDC output voltage regulator with an input voltage as low as 3 VDC, or as an adjustable-output voltage regulator. 90% efficient with upto 24 Watt output, 2.0 - 16.5VDC input. The MAX1771 is commonly used as positive LCD-bias generators, flash memory programmers, high-power RF power amplifier power supplies, palm top power supplies, handheld terminals, portable communicators, and numerous battery-operated circuits. MAX1771 DC/DC Controller Boost Voltage Regulators shipped in antistatic reel tape.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(5) MAX1771CSA / MAX 1771 MAX1771-type 12V or ADJUSTABLE ICs
HIGH-EFFICIENCY, LOW-IQ, STEP-UP DC-DC CONTROLLERs
BOOST VOLTAGE REGULATORS, Maxim Integrated Products

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS), TO220 steel tabs ICs, LM217 adjustable positive voltage regulator ICs. The LM217 adjustable voltage regulators are ideal for many regulated power supply requirements. The LM217 is an equivalent to the LM317 except the LM217 has much better specifications. If your application requires precision voltage regulation (e.g. transducer applications), or you just need a strong selling point over that of your competitors, the LM217 may be exactly what you need.

Seller Codes:
(10) LM217T Voltage Regulators: LD0100, LR000-S00, LS000-R00, MM000, CC000. $9.95
(25) LM217T Voltage Regulators: LD0100, LR000-S00, LS000-R00, MM000, CC000. $22.95

New old stock, TO220 steel tabs. The popular LM317AT / LM317 / LM 317AT adjustable positive voltage regulator ICs are ideal for many regulated power supply requirements. We are also selling LM217 ICs, see herein. For dual voltage power supplies, the LM317 is generally used with its complement, the LM337 adjustable negative voltage regulator (which we also sell).

Seller Codes:
(10) LM317AT Voltage Regulators: LD0100, LR000-S00, LS000-R00, MM000, CC000. $7.95
(25) LM317AT Voltage Regulators: LD0100, LR000-S00, LS000-R00, MM000, CC000. $18.95

(20) LM317S-ADJ / LM 317-type
POSITIVE ADJUSTABLE VOLTAGE REGULATORS
NATIONAL SEMICONDUCTOR

New old stock (NOS), SMT/SMD ICs. LM317S-ADJ / LM317-type positive adjustable voltage regulator ICs are ideal for many regulated power supply requirements as both main regulators, and to provide additional precision voltage levels wherever needed in your circuits. National Semiconductor. Voltage adjusts from 1.2 VDC to 37 VDC. Widespread applications for virtually all electronic circuits - linear, digital or hybrid. We also sell the LM317 in popular TO-220 and other packages herein, see this webpage.

New old stock (NOS), SMT/SMD ICs. LM317 positive adjustable voltage regulator ICs are ideal for many regulated power supply requirements as both main regulators, and to provide additional precision voltage levels wherever needed in your circuits. Voltage adjusts from 1.2 VDC to 37 VDC. Widespread applications for virtually all electronic circuits - linear, digital or hybrid. We also sell the LM317 TO-220 steel tabs, see this webpage. Shipped in antistatic tube or reel tape.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? See top of this webpage for big cost-savings quantity deals!

(20) LD1117 / LD 1117, ST Microelectronics
LOW DROPOUT ADJUSTABLE POSITIVE VOLTAGE REGULATORs

New old stock (NOS), SOT223 SMT/SMD. LD1117 / LD 1117 Low Dropout Adjustable Positive Voltage Regulators, ST Microelectronics. LD1117 voltage regulators shipped in antistatic reel tape.

(25) LM2575T-12 / LM 2575T / LM2575 / LM 2575
+12VDC, 1 AMP STEP DOWN SWITCHING VOLTAGE REGULATOR,
National Semiconductor

New old stock (NOS) TO-220 ICs. LM2575T-12 / LM 2575T / LM2575 / LM 2575 is a 12V, 1A Step-Down Switching Regulator (Boost Regulator). The highly efficient LM2575T has thermal shutdown and a pin for manual shutdown. LM2575T-12 shipped in antistatic tube.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(10) LM2595T-ADJ / LM2595-type SWITCHER
DC-DC POWER CONVERTER, 1A
STEP-DOWN ADJUSTABLE VOLTAGE REGULATOR
National Semiconductor

New old stock (NOS) TO-220. LM2595T-ADJ / LM2595-type Switcher DC-DC Power Converter Adjustable Step-Down (Buck) Voltage Regulator, 1.0 Amp, National Semiconductor. The LM2595 is known for its high-efficiency - especially important today - and its remote shut-off feature. Also used for positive-to-negative DC voltage conversions. LM2595T-ADJ adjustable voltage regulators shipped in antistatic tube or foam.

(10) LM2598T-ADJ / LM2598-type SWITCHER
DC-DC POWER CONVERTER, 1A
STEP-DOWN ADJUSTABLE VOLTAGE REGULATOR
National Semiconductor

New old stock (NOS) TO-220. LM2598T-ADJ / LM2598-type Switcher DC-DC Power Converter Adjustable Step-Down (Buck) Voltage Regulator, 1.0 Amp, National Semiconductor. The LM2598 is known for its high-efficiency - especially important today - and its remote shut-off feature. Also used for positive-to-negative DC voltage conversions. LM2598T-ADJ adjustable voltage regulators shipped in antistatic tube or foam.

(10) LM2650M-ADJ / LM2650 2650-TYPE, 3A
SYNCHRONOUS STEP-DOWN DC/DC CONVERTERs
HIGH-EFFICIENCY ADJUSTABLE VOLTAGE REGULATORs
NATIONAL SEMICONDUCTOR

New old stock (NOS) SOIC SMT/SMD ICs. LM2650M-ADJ Synchronous Step-Down DC/DC Converter Adjustable Voltage Regulator ICs, 3A, National Semiconductor. The LM2650 is an high-efficient voltage regulator (95+% at 1A) - high efficiency down to milliamp loads, which makes it the optimum adjustable voltage regulator for battery-operated circuits where long battery life is important for circuits in both run and standby modes. As costly as batteries are now and as critical as energy efficiency is now, the LM2650 adjustable voltage regulator is ideal for many battery-operated circuits. Popular LM2650 applications include palmtop and notebook computers, modems, portable data terminals, global positioning systems (GPS), and remote battery-powered digital devices. The LM2650 has a sleep mode. 4.5V - 18V input voltage. LM2650M Voltage Regulators shipped in antistatic tube or foam.

(10) L4962EA / L4962E / L4962 1.5A POWER SWITCHING REGULATORs
5V-40V ADJUSTABLE VOLTAGE REGULATORs, ST Microelectronics

New old stock (NOS) Heptawatt package. L4962EA / L4962E / L4962-type 1.5A Power Switching Regulators, 5V-40V Adjustable Voltage Regulators, ST Microelectronics. The L4962EA has advantages over many other adjustable voltage regulators, for examples, precise on-chip voltage reference, high switching frequency, very high efficiency, soft start, thermal shutdown, internal current limiting, and the L4962 requires very few external electronic parts. L4962EA ICs shipped in antistatic tube or foam.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(50) LM320T-5 / LM320-type -5V, 1A,
NEGATIVE VOLTAGE REGULATORs, National Semiconductor

New old stock (NOS), TO-220. LM320T-5 / LM320-type -5V, 1A, Negative Voltage Regulators, National Semiconductor. LM320T-5 voltage regulators shipped in antistatic tube.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(2) PT78NR112V / PT 78NR112V POWER TRENDS (TI)
-12Vout, 1A WIDE-INPUT PLUS-TO-MINUS VOLTAGE
STEP-DOWN ISR VOLTAGE REGULATOR ICs

New old stock (NOS) Power Trends (Texas Instruments) PT78NR112V / PT 78NR112V -12 volts, 1 amps wide-input plus-to-minus voltage step-down Integrated Switching Regulator (ISR), vertical mount. The PT78NR112V / PT 78NR112V -12VDC voltage regulators (switching voltage regulator) features a very small footprint, high-efficiency (> 85%), self-contained inductor filtering, internal short-circuit protection, over-temperature protection, fast transient response, wide input range. The PT78 is a series of wide-input range, 3-terminal regulators. These ISRs have a maximum output current of 1.5 Amps and an output voltage that is laser trimmed to a variety of industry standard positive and negative voltages. These 78 series regulators have excellent line and load regulation with internal short-circuit and over-temperature protection, and are offered in a variety of standard output voltages.Shipped in antistatic tube or foam.

(50) LM79L15ACM / LM79L15 / LM 79L15 (LM7915 / LM 7915)
NEGATIVE VOLTAGE REGULATORs, -15VDC
National Semiconductor

New old stock (NOS) SMT/SMD ICs. LM79L15ACM / LM79L15 / LM 79L15 (LM7915 / LM 7915) Negative Voltage Regulators, -15VDC, National Semiconductor. LM79L15ACM shipped in antistatic tube.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(50) LM337T / LM337 / LM 337T, ON Semiconductor
1.5A ADJUSTABLE NEGATIVE VOLTAGE REGULATOR

New old stock (NOS) LM337T / LM337 / LM 337T 1.5 amp adjustable negative voltage regulators, TO-220 ICs, ON Semiconductor. For dual voltage power supplies, the LM337 is generally used with its complement, the LM317 adjustable positive voltage regulator (which we also sell).

(5) L296P W88ZB832, 4AMP ADJUSTABLE VOLTAGE REGULATORS
HIGH CURRENT SWITCHING REGULATOR ICs, L296 / W 88ZB832

New old stock NOS W88ZB832 high-current adjustable switching voltage regulators, 15-pin SIP ICs. 15-pins (staggered pins). FEATURES: 4 Amp Output Current, adjustable 5.1V - 40V Output Voltage Range (TTL, CMOS, and virtually all Linear applications), 0% - 100% Duty Cycle, Precision On-Chip Reference, Switching Frequency upto 200 KHz, High Efficiency up to 90%, Few External Parts, Soft Start, Output Reset, Externally Programmable Limiting Current, Control Circuit for Crowbar SCR, Input Remote Inhibit and Synchronization PWM, and Thermal Shutdown - so many critical features. What more can you ask for! Shipped in antistatic tube or foam.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(20) LM2675N-ADJ SIMPLE SWITCHER POWER CONVERTER,
1A STEP-DOWN VOLTAGE REGULATOR ICs, HIGH-EFFICIENCY,
NATIONAL SEMICONDUCTOR

New old stock (NOS) National Semiconductor LM2675N-ADJ simple switcher power converter, high-efficiency, 1 Amp step-down voltage regulator, 8-pin DIP/DIL. While most versions of the LM2675 have a constant voltage output of 3.3VDC, 5VDC, 12VDC, this is the much more versatile adjustable voltage output version (1.21V - 37V). Shipped in antistatic tube or foam.

(5) MAXIM MAX667CSA / MAX 667CSA MAX667-TYPE
STEP-UP VOLTAGE REGULATOR
CONVERTS 3VDC LITHIUM-ION VOLTAGES TO 5VDC

New old stock (NOS) Maxim MAX667CSA / MAX 667CSA MAX667-type voltage regulated step-up voltage regulator ICs efficiently converts 3 VDC lithium-ion battery voltages to 5 VDC TTL-level, up to 100ma, w/o inductors or transformers. SMD/SMT. Image shows top and bottom of MAX667 IC. MAX667CSA shipped in antistatic tube or foam.

(50) LP2988IMM-3.0 / LP2988 LP 2988-type
+3.0V, 200MA VOLTAGE REGULATORS
MICROPOWER ULTRA LOW-DROPOUT VOLTAGE REGULATORS
w/ PROGRAMMABLE POWER-ON RESET DELAY, LOW NOISE
National Semiconductor

New old stock (NOS) SMT/SMD ICs. LP2988IMM-3.0 / LP2988 LP 2988-type +3.0VDC, 200ma, Micropower Ultra Low-Dropout Voltage Regulators, with Programmable Power-ON Reset Delay, Low-Noise Version, National Semiconductor. LP2988IMM voltage regulators are linear voltage regulators popularly used for highly efficient linear regulators and for low-dropout voltage regulators. The LP2988 provides very low quiescent current, tight line regulation and load regulation, reverse battery protection, and very low temperature coefficient. While package shows "49B," these are actually LP2988-3.0 ICs. LP2988IMM-3.0 provided on antistatic reel tape or foam.

(10) LP2953AIN-3.3 / LP2953 LP 2953-type
+3.3V VOLTAGE REGULATORS
MICROPOWER LOW-DROPOUT VOLTAGE REGULATORS
NATIONAL SEMICONDUCTOR

New old stock (NOS) DIP/DIL ICs. LP2953AIN-3.3 / LP2953 +3.3VDC Micropower Low-Dropout Voltage Regulators, 500ma, National Semiconductor, LP 2953-type. LP2953AIN voltage regulators are linear voltage regulators popularly used for highly efficient linear regulators and for low-dropout voltage regulators. The LP2953 provides very low quiescent current, tight line regulation and load regulation, reverse battery protection, and very low temperature coefficient. Applications are high-efficient linear voltage regulators, under-voltage shutdown voltage regulators, battery-powered voltage regulators, and snap-ON / snap-OFF voltage regulators. LP2953AIN-3.3 Voltage Regulators shipped in antistatic tube or foam..

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS), SOT23 SMT/SMD. RD3.6M-T2B, 3.6V Voltage Regulators, NEC. We are not sure exactly what these 3-pin electronic parts are, but believe that they are 3.6V Voltage Regulators. RD3.6M-T2B shipped on antistatic reel tape.

(25) 79AB-2987I-M3.33 / LP2987I
Micropower, 200 mA Ultra Low-Dropout Voltage Regulator w/
Programmable Power-On Reset Delay, National Semiconductor

New old stock (NOS) SMT/SMD ICs. Rare 79AB-2987I-M3.33 / LP2987I Micropower, 200 mA Ultra Low-Dropout Voltage Regulator w/ Programmable Power-On Reset Delay, National Semiconductor. 3.3 Volt. 79AB-2987I-M3.33 shipped in antistatic tube.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(10) LP2954AIT / LP2954 LP 2954-type +5V VOLTAGE REGULATORS
MICROPOWER LOW-DROPOUT VOLTAGE REGULATORS
National Semiconductor

New old stock (NOS) TO-220 ICs. LP2954AIT / LP2954 +5VDC Micropower Low-Dropout Voltage Regulators, 500ma, National Semiconductor, LP 2954-type. LP2954AIT voltage regulators are linear voltage regulators popularly used for highly efficient linear regulators and for low-dropout voltage regulators. The LP2954 provides very low quiescent current, tight line regulation and load regulation, reverse battery protection, and very low temperature coefficient.

(25) LM7805 / LM 7805 +5 VDC,
1.5A VOLTAGE REGULATOR ICs, +5VDC, TYPE 7805, MC7805 EQUIVALENT

New old stock (NOS) TO-220 ICs, steel tabs. LM7805 +5VDC voltage regulators. These parts come with proprietary markings as shown in image. However, they are definitely LM 7805 +5 VDC Voltage Regulator ICs, as we have used 100s in my own circuits. We have operated them at 1.5 amps without problems. Furthermore, the proprietary markings are a big advantage if you want to keep your circuit designs secret and safer from reverse engineering.

(5) LM340K-5.0, +5V, 1.5A POSITIVE VOLTAGE REGULATORs
M7805 EQUIV., National Semiconductor

New old stock (NOS). LM340K-5.0 +5VDC Voltage Regulators, National Semiconductor.

(25) LM78M05, LM341T-5.0 (LM 78M05, LM 341T-5.0),
LM 7805 +5 VDC, 0.5 AMP VOLTAGE REGULATORS

New old stock (NOS) 78M05 +5VDC voltage regulator TO-220 ICs. MSC78M05 and other 78M05 equivalent. +5 VDC voltage regulators are what you need if you work with TTL technology, and some microcontroller, memory, interface (e.g. ADC / DAC) circuits. We like these a lot because for regulated power supplies that use four 1.5 VDC AAA, AA, C or D batteries wired in series, the +5 VDC voltage regulator is great to squeeze out the highest regulated voltage throughout the useable life of the batteries, so is a very popular ICs in our designs of this type. Almost all semiconductor circuits require a voltage regulator IC for best results whether the power supply voltage comes from a battery or an AC transformer and a set of rectifiers. Common 1.5V alkaline batteries gradually reduce their output voltage as the battery depletes (as opposed to NiCd batteries, which steadily maintain output voltage until depleted, at which time output voltage immediately plunges). Widespread uses in many circuit designs.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(25) MSC78M05 305-5V +5VDC VOLTAGE REGULATORS,
+5VDC REGULATORS, +5 VDC VOLTAGE REGULATORS

New old stock (NOS), SMT/SMD ICs. MSC78M05 equivalent. +5 VDC voltage regulators are what you need if you work with TTL, and some microcontroller, memory, interface (e.g. ADC / DAC) circuits. We have not used these, and the "305" on them is enigmatic, but have been told that they are +5VDC voltage regulators. MSC78M05 voltage regulators have widespread uses in many circuit designs.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(25) L7808ACV / L-7808 +8.0V, 1.5A - ST Microelectronics
3-TERMINAL POSITIVE VOLTAGE REGULATORs

New old stock (NOS) TO-220. L7808ACV / L-7808 +8.0 VDC, 1.5 Amp, 3-Terminal Positive Voltage Regulator, ST Microelectronics. The L7808 linear voltage regulator IC is great for uses with circuits powered by 9VDC radio battery. The 1.5A L7808 linear voltage regulators have same pinout as the common 1.0A LM7808 +8V voltage regulators and the very low forward drop LM2930-8.0 voltage regulators (which we also sell).

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(10) LM2930T-8.0 / LM2930 +8V,
3-TERMINAL POSITIVE VOLTAGE REGULATORs
NATIONAL SEMICONDUCTOR

New old stock (NOS) TO-220. LM2930T-8.0, +8.0VDC 3-Terminal Positive Voltage Regulator, National Semiconductor. The LM2930 linear voltage regulator's best feature is its very low difference between input voltage and output voltage - as low as 0.32V - great for low-power uses with 9VDC radio batteries to squeeze out every last ounce of power from costly batteries as they deplete. The LM2930T-8.0 linear voltage regulators have the same pinout as the common LM7808 and L7808 voltage regulators (which we also sell).

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(12) LM7812 VOLTAGE REGULATOR ICs
on HEATSINKS, +12 VDC, LM 7812 +12VDC VOLTAGE REGULATORS

New old stock (NOS) SOIC TO-220 ICs. These LM7812 positive 12VDC voltage regulator ICs on heatsinks are circuit clips (used voltage regulator ICs). We have sampled-tested them under 12-ohm loads and every single one tested 100% perfect (10% randomly selected sample). The LM7812 ICs are riveted to their T0-220 heatsinks for a snug thermal connection, and were mounted with conductive paste. IC leads extend 1/4" beneath heatsink for insertion into PC boards, solderless breadboards and prototype boards (for easier board insertion, you can use wire cutters to cut ends of leads at a slant to point them). One wing of the heatsinks is bent from the normal 90 degree position to about 45 degrees so that clipping tool could get a clean, even flush cut, but is easily and quickly bent back without breaking using pliars. TO-220 heat sinks like these are expensive (much more expensive than the LM7812), and the cost of mounting voltage regulators on heatsinks in time, effort and money is substantial, especially in quantity, so don't let this great deal get by you. Of course, if you need these expensive TO-220 heat sinks for some other TO-220 voltage regulators (e.g. LM7805, LM7815, LM7908, LM317, etc.), TO-220 power opamps (e.g. TIP120, TIP32, etc.), or other part, you can always easily drill, punch or grind off the rivets to replace the LM7812s.

Seller Codes:
(12) LM7812 Voltage Regulators on Heatsinks, +12VDC: LD097, LR099-S01, LS000-R00, LS000-R00, MM000, CC000. $9.95
(24) LM7812 Voltage Regulators on Heatsinks, +12VDC: LD097, LR099-S01, LS000-R00, LS000-R00, MM000, CC000. $17.95 S/H: $9.90

(10) LM2576T-12 / LM2576-type +12 VDC SWITCHER
DC-DC POWER CONVERTER, 3.0AMP
STEP-DOWN +12V VOLTAGE REGULATOR
National Semiconductor

New old stock (NOS) TO-220. LM2576T-12 / LM2576-type +12V Switcher DC-DC Power Converter Step-Down (Buck) +12V Voltage Regulator, 3.0 Amp (3A), National Semiconductor. The LM2576 is known for its high-efficiency - especially important today - and its remote shut-off feature. Also used for positive-to-negative DC voltage conversions. LM2576T-12 adjustable voltage regulators shipped in antistatic tube or foam.

(10) LM2671M-12 / LM2671 2671-TYPE, 500ma
STEP-DOWN DC/DC CONVERTERs (BUCK REGULATORs)
HIGH-EFFICIENCY +12VDC VOLTAGE REGULATORs
National Semiconductor

New old stock (NOS) SMT/SMD ICs. LM2671M-12 Step-Down DC/DC Converter +12VDC Voltage Regulator ICs, 500ma, National Semiconductor. The LM2671 is an high-efficient voltage regulator (90+%) - high efficiency down to milliamp loads, which makes it the optimum voltage regulator for battery-operated circuits where long battery life is important for circuits in both run and standby modes. Input voltage as high as 40VDC. The LM2671 has excellent line regulation and load regulation. The LM2671 is ideal for palmtop and notebook computers, modems, portable data terminals, global positioning systems (GPS), and remote battery-powered digital devices. LM2671M Voltage Regulators shipped in antistatic tube or foam.

(25) LM340LA15 / 340LA15 / LM78L15 VOLTAGE REGULATORS
+15VDC, 100MA, TO-92 NATIONAL SEMICONDUCTOR

LM340LA15 / 340LA15 / LM78L15 DC voltage regulator ICs, +15 VDC, 100ma, TO-92, National Semiconductor. LM7815 voltage regulators are ideal for circuits using two 9VDC radio batteries wired in series - producing a steady +15VDC even as the battery slowly loses voltage.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS) 7815 +15VDC 1 Amp voltage regulator TO-220 ICs. MSC7815 and other 7815 equivalent. We like these a lot because for regulated power supplies that use two 9 VDC radio batteries wired in series, the +15 VDC voltage regulator is great to squeeze out the highest regulated voltage throughout the useable life of the carbon or alkaline batteries, so is a very popular ICs in our designs. Almost all semiconductor circuits require a voltage regulator IC for best results whether the power supply voltage comes from a battery or an AC transformer and a full-wave rectifier. Common 9V alkaline batteries gradually reduce their output voltage as the battery depletes (as opposed to NiCd batteries, which steadily maintain output voltage until depleted, at which time output voltage immediately plunges). Widespread uses in circuit designs.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(10) L78M24CS +24VDC VOLTAGE REGULATORS, 0.5 AMP
LM78M24, MC78M24, 78M24, LM7824, MC7824, 7824-type
ST Microelectronics

New old stock (NOS), SMT/SMD. L78M24CS +24VDC Voltage Regulators, 0.5AMP, LM78M24, MC78M24, 78M24, LM7824, MC7824, 7824-type +24VDC voltage regulator ICs, ST Microelectronics. These 7824 ICs are excellent for those numerous and various 24VDC relays and other circuitry you may have in your collection. Obtained from aircraft military salvage.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(10) MC7824CT / MC 7824CT, MC7824-type
24 VDC VOLTAGE REGULATORS -
GOLD LEADS, 1 AMP, LM7824, 7824 EQUIVALENT

New old stock (NOS), TO-220 steel tabs. Gold leads, MC7824 24VDC voltage regulator ICs. These MC 7824 ICs are excellent for those numerous and various 24VDC relays and other circuitry you may have in your collection. Obtained from military aircraft salvage. LM 7824 +24VDC, 1Amp voltage regulators. equivalents.

LM340T24 / LM 340T24,
24 VDC VOLTAGE REGULATORS, 1 AMP,
LM7824 / LM 7824, MC7824 / MC 7824, 7824 EQUIVALENT

New old stock (NOS), TO-220 steel tabs ICs, LM340T24/LM7824 24VDC voltage regulators, 1Amp.

Seller Codes:
(10) LM340T24 / LM7824 Voltage Regulators: LD100, LR000-S00, LS000-R00, MM000, CC000. $7.95
(25) LM340T24 / LM7824 Voltage Regulators: LD100, LR000-S00, LS000-R00, MM000, CC000. $18.95

(5) UA78S40PC / UA 78S40PC / UA78S40 / 78S40
UNIVERSAL SWITCHING VOLTAGE REGULATOR SUBSYSTEM
ON Semiconductor

New old stock (NOS) DIP/DIL ICs. UA78S40PC / UA 78S40PC / UA78S40 / 78S40 Universal Switching Regulator Subsystem, ON Semiconductor. UA78S40PC shipped in antistatic tube or foam.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS) 7905 -5 VDC, 1.5 Amp voltage regulator, TO-220 ICs. The MC7905CT is an industry standard -5VDC voltage regulator, equiv. to the LM7905CT-type 7905 voltage regulator. Especially handy if you want to add a linear or amplifier section to a 5 VDC logic circuit and can substitute the 5 volt transformer for a split 10 volt transformer. Versatile and easy-to-use - great for all kinds of circuit jobs you have - especially RF and ultrasonic - including class and science fair projects, and learning tool for electronics. Shipped in antistatic tubes.

New old stock (NOS) LM79M12A / LM 79M12A -12 VDC voltage regulator ICs, TO-220. As with all my new TO-220 items, while all leads are full length, only top part of leads are usually shown in images.

(50) LM79L15ACM / 79L15 7915-type NEGATIVE VR
-15VDC VOLTAGE REGULATORs,
NATIONAL SEMICONDUCTOR

New old stock (NOS) SMT/SMD ICs. LM79L15ACM / 79L15 7915-type Negative Voltage Regulator ICs (-15VDC Voltage Regulators, 100ma), National Semiconductor. The LM79L15 Negative Voltage Regulator ICs shipped in antistatic tube or foam.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(10) MAXIM MAX634 / MAX 634 CMOS MICROPOWER
INVERTING SWITCHING VOLTAGE REGULATOR

New old stock (NOS) Maxim MAX634 - CMOS Micropower Inverting Switching Regulator, 8-DIP. Input voltage is 2.3 VDC - 16.5 VDC, output is -5 VDC to -15VDC (output set by a resistor divider network). With low power supply voltage indicator. MAX634 inverter regulator shipped in antistatic tube or foam.

(6) MAXIM MAX691CPE / MAX691 / MAX 691
MICROPROCESSOR SUPERVISORY CIRCUIT /
WATCHDOG TIMER RESET PFI / SWITCH

New old stock (NOS), DIP/DIL ICs. Maxim MAX691CPE / MAX691 / MAX 691 Microprocessor Supervisory Circuit, Watchdog Timer Reset PFI / Switch. MAX691CPE microprocessor supervisory circuits shipped in antistatic tube or foam.

(3) MAX691MJE / MAX 691MJE / MAX691-type, MAXIM
MICROPROCESSOR SUPERVISOR CIRCUITS ICs

New old stock (NOS) CERDIP ICs. Maxim MAX691MJE / MAX 691MJE / MAX691-type microprocessor supervisor circuits. These Maxim 691 MJE microcprocessor supervisory circuits are the primo variety of the Max 691 ICs series with the greatest temperature specifications (-55 °C to +125 °C). Just about ideal for controlling +5VDC power supply voltage to microcomputers, microprocessors, microcontrollers and other critical circuits. Your µP or µC is just too important to risk with anything else. MAX691MJE microprocessor supervisor circuit ICs shipped in antistatic tube or foam.

New old stock (NOS), SMT/SMD. Maxim MAX705 power supervisor / power watchdog / power monitoring ICs. Protects MPU, CPU, MCU, intelligent instruments, critical automotive, etc. circuits from power-up, power-down and brownout conditions. The MAX705 is similar to MAX708, but with the added watchdog timer. Maxim MAX705 shipped in antistatic tube. This invaluable MAX705 can make all the difference in whether or not your computer, peripheral or other critical electronics survives during a power anomaly!

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(25) TL7705AC / TL-7705AC / TL7705-type
SUPPLY-VOLTAGE SUPERVISOR ICs, Texas Instruments

New old stock (NOS) SMT/SMD ICs. TL7705AC / TL-7705AC / TL7705-type Supply Voltage Supervisor ICs. Reset controller for microcontrollers, microcomputers and microprocessors. Basically, the TL7705 is voltage comparator especially designed to protect electronic circuits from power supply undervoltage conditions. TL7705AC supply voltage supervisor ICs shipped in antistatic tube or foam.

(2) TL7705ACP / TL 7705ACP / TL705-type, Texas Instruments
POWER SUPPLY VOLTAGE SUPERVISOR (PSVS), TL 7705

New old stock (NOS) DIP/DIL ICs. Texas Instruments TL7705ACP / TL 7705ACP / TL705-type power supply voltage supervisor (PSVS). These 8-pin power supply control ICs are a very important means of protecting microcomputers, microprocessors and microcontrollers, and for predictable and reliable boot-ups. ICs are also marked with, "306XBM." TL7705ACP MPU power supply voltage supervisor ICs shipped in antistatic tube or foam.

New old stock (NOS) 8-pin SOIC SMT/SMD ICs. Maxim MAX708S / MAX 708S / MAX708 MPU Supervisor ICs. MAX708 MPU supervisory ICs shipped in antistatic tube or foam.

New old stock (NOS), ICL7665-type Maxim microprocessor voltage monitor DIP/DIL ICs (we also sell ICL7660 ICs). Shipped in antistatic tube or foam.

New old stock (NOS) SOIC SMT/SMD IC. BQ2054 / BQ 2054 LI-ION / Lithium-Ion Fast-Charge IC, Unitrode. The BQ2054 IC is specifically designed and ideal for safely charging lithium-ion batteries. BQ2054 Lithium-Ion Fast Charge ICs shipped in antistatic tube or foam.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(25) INTERSIL ICL7660CPA / ICL 7660CPA
NEGATIVE VOLTAGE CONVERTER ICS (-5VDC OUTPUT)

New old stock (NOS) ICL7660 negative voltage converter (-5 VDC output) DIP/DIL ICs. ICL 7660 type Intersil ICs, equiv. to 7660 ICs and to the Maxim Max1044 (Max 1044). The ICL7660 is by far the easiest, fastest, most versatile, most compact and cheapest way to add a negative power supply voltage to a circuit that has only a positive power supply voltage! Can also be wired with a few parts to be a positive voltage doubler or positive voltage tripler! Absolutely invaluable for the designer! You can connect these up to even double the current if you wish! When used in conjunction with a single cell battery (1.5 VDC AA, AAA, C, D, coin battery/cell), because the negative voltage output almost doubles the total VDC to close to 3 VDC, you can use it to operate low-voltage ICs like the LM358 and NE532 from a single 1-cell battery! Permits external clocking and shutdown. Requires only 2-3 common capacitors and 2-3 diodes to operate (combination of which depends upon desired output). Especially ideal for bipolar opamps, cheapo dynamic RAM (as compared to static RAM), microprocessors and microcontrollers that require negative power supplies (e.g. 8080 series), data acquisition systems (ADC, DAC, etc), single-cell power supply circuits, and some transducers. If you are serious about electronics, you absolutely must keep in stock a good supply of these ICs. We also sell Maxim ICL7665A voltage monitors. Shipped in antistatic tube.

Seller Codes: LD049, LR093-S01, LR098-S01, LR100-S02, LS000-R00, MM000, CC000. $14.95

(3) RBV-406 HIGH VOLTAGE (600V, 4A)
FULL WAVE BRIDGE RECTIFIERS / FULL WAVE RECTIFIERS

New old stock (NOS). RBV-406 High Voltage, Full Wave Bridge Rectifiers / Full Wave Rectifiers. 600V, 4A, Vf=1.1V. These RBV-406 bridge rectifiers are great for full-wave rectifying 120VAC and 240VAC power.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(10) ML4803C2 / ML 4803C2 / ML4803-type, Fairchild Semiconductor
POWER FACTOR CORRECTION (PFC) &
PULSE WIDTH MODULATION (PWM) CONTROLLER COMBO,

New old stock (NOS), SMD/SMT IC. ML4803C2 / ML 4803 / ML4803-type Power Factor Correction (PFC) and Pulse Width Modulator (PWM) Controller combination IC, Fairchild Semiconductor. Both corrects power factors and performs as a pulse-width modulator. ML4803C2 shipped in antistatic tube or foam.

POWER TRENDS PT4202C / PT 4202C,
48VDC INPUT, 3.3VDC OUTPUT @ 5WATT,
ISOLATED DC-DC CONVERTER

New Power Trends PT4202C Isolated DC-DC Power Converter, 48 VDC input, 3.3 VDC output at up to 5 watts. This physically large IC is SMD/SMT - 1-3/4" x 1".

RARE AD536AJD / AD 536AJD, AD536-type,
RMS-TO-DC CONVERTER, GOLD IC, Analog Devices

New old stock (NOS) DIP/DIL IC. Analog Devices AD536AJD / AD 536AJD, AD536-type gold integrated circuit, RMS-to-DC converter. The AD536A / AD536 IC is a RMS-to-DC converter. This rare gold Analog Devices IC is a great collectible. Gold AD536AJD RMS-to-DC converter IC shipped in antistatic tube or foam.

(125) LM336M2.5 / LM336M-2.5 +2.5V VOLTAGE REFERENCE DIODES
NATIONAL SEMICONDUCTOR

New old stock (NOS) LM336M2.5 / LM336M-2.5 voltage reference diodes, +2.5 volt LM336 SMD/SMT ICs. By National Semiconductor. Shipped in antistatic tube or foam.

(50) LM385BM1.2 / LM385BM-1.2, +1.2V VOLTAGE REFERENCE DIODES
NATIONAL SEMICONDUCTOR

New old stock (NOS) National Semiconductor LM385BM1.2 / LM385BM-1.2, +1.2 LM385 Volt voltage reference diode, 8-SOIC SMD/SMT ICs. Shipped in antistatic tube or foam.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS) SMT/SMD. LT1021DCS8-10 / LT1021 Precision Reference ICs, Linear Technology. While these ICs are marked, "928 2110," the new tubes they came in are marked "LT1021DCS8-10". LT1021 precision reference ICs shipped in antistatic tube or foam.

(50) TL1431QD / TL-1431QD / TL1431-type
PRECISION PROGRAMMABLE REFERENCE - Texas Instruments

New old stock (NOS) SMT/SMD ICs. Versatile TL1431QD / TL-1431QD / TL1431 Precision Programmable Reference, Texas Instruments. The output voltage can be set between 2.5V and 36V using only two resistors (0.2 Ohm output). Makes a great replacement for zener diodes. Instead of having a cumbersome cabinet-full of zener diodes to cover all your 2.5-36 VDC zener values, you can now do it all with just a supply of TL1431 programmable precision references. Not only a great voltage reference, the TL1431 also doubles nicely as an audio and ultrasonic amplifier (upto about 1.5 MHz), in conjunction with a voltage regulator IC (e.g. LM 317), SCR controller, triac controller, comparator, and in FSK and pulse width modulator circuits. TL1431QD precision programmable reference ICs shipped in antistatic tube or foam.

(10) AR9541AD / AR-9541AD / AR9541-type
LI-ION BATTERY PROTECTOR / LITHIUM-ION BATTERY PROTECTOR

New old stock (NOS) SMT/SMD ICs. We believe, but are not certain and cannot guarantee, that these AR9541AD / AR-9541AD / AR9541-type ICs are a LI-ION (Lithium-Ion) Battery Protector. It was represented as such, but we cannot match the numbers exactly. AR9541AD ICs shipped in antistatic tube or foam.

(5) BYW99-W200 / BYW99W200
HIGH EFFICIENCY ULTRAFAST RECOVERY RECTIFIER DIODES
STMicroelectronics

New old stock (NOS) TO-247 ICs. BYW99-W200 / BYW99W200 High Efficiency Ultra Fast Recovery Rectifier Diodes - STMicroelectronics. The BWY99 is rated for 35A RMS and 200A surge, 200V, 40ns max. The BWY99-W200 is back-to-back diodes, primarily applied in high-power fast-switching and linear power supplies. For many more of our power rectifiers, see our Rectifiers-Diodes webpage.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

MOVs / Varistors / Transient Suppressors / Lightning Arrestors / GDTs / Transil Diodes:

(10) 300-VOLT GAS DISCHARGE TUBEs (GDTs), 2035-30-SM-RP /
ISOLATED LOOP CIRCUIT PROTECTORs /
LIGHTNING ARRESTORs / SPIKE SUPPRESSORs /
SURGE ARRESTORs / TRANSIENT SUPPRESSORs /
CORONA DISCHARGE SUPPRESSORs / SPARK ARRESTORs, Bourns

New old stock (NOS), SMT/SMD. 300-Volt Gas Discharge Tubes, Bourns 2035-30-SM-RP (Isolated Loop Circuit Protectors), surge arrestors / lightning arrestors / spike suppressors / transient suppressors / corona discharge suppressors / electric spark suppressors. GDTs are additionally called surge protectors / surge suppressors, surge limiters, and transient arrestors. To quote ELECTRONIC DESIGN magazine ("Use GDTs For Surge Protection in Broadband Digital Comm," 12/11/08), "Gas discharge tubes (GDTs) have evolved to a level of providing very reliable and effective surge protection in telecommunications systems and equipment, safeguarding against lighning and power-fault conditions. Due to their robust nature and superior electrical characteristics, GDTs have already become the preferred replacement for carbon blocks in traditional telephone-service applications. Because of their ultra-low capacitance plus low insertion and return loss performance, they're also replacing solid-state semiconductor solutions in broadband-communication designs. ... GDTs protect against overvoltages caused by lightning, power switching, and fault conditions." While this typically great Electronic Design article was devoted to broadband digital communications, you should provide this same outstanding GDT protection for every piece of electronic equipment / electrical equipment you value which is connected to any power line, phone line, cable or antenna. Virtually no commercially-available transient-suppressed power strips have built-in gas discharge tube lightning arrestors although nearby lightning strikes and power system/equipment problems are major killers of computers, computer peripherals, radios, televisions and other electronic equipment and electrical equipment. These GDTs are about 1/4" long, 1/4" dia. Easily solderable on both ends. One end lead is connected to the Hot side lead and the other end lead is connected to the Earth Ground lead. An additional GDT should be connected between the Hot side lead and the Neutral lead. Under normal operations, GDTs have virtually open-circuit resistance, so power insertion loss is virtually zero. When a high-voltage transient or electrical fault occurs, GDTs contain a gas which is ionized by high voltages, which switches the lightning arrestor's resistance to near short circuit to divert the high transient currents safely to Earth ground and away from your invaluable equipment circuitry.
When installed in conjunction with MOVs (we also sell), fuses / circuit breakers, and high-voltage bypass capacitors typically found in most very high quality power strips with built-in transient suppression, your protection against power line, phone line, cable and antenna line-induced electrical pulses from lightning, power company equipment failures, switching high-power equipment, solar storm solar flares, electromagnetic pulse (EMP), and corona discharges is optimized. Solar storm-caused solar flares can induce high voltage surges which can wipe out virtually all unprotected electronics over vast areas. Electromagnetic pulses result from war and terrorism - one air E-Bomb can wipe out all unprotected electronics coast-to-coast. In times of terrorism and war, your radio, TV and computer can mean the difference between life and death! Again, every piece of important electrical or electronic equipment plugged into a power outlet, power strip, phone line, cable TV or antenna line needs to be protected with GDTs no matter how else protected. Even if the connected equipment or power strip is switched off, a line pulse of only a few 1,000 volts can arc across the switch contacts to destroy the electronics. These Bourns 2035-30-SM-RP gas discharge tubes are also ideal for protecting antenna arrays, single antennas and other electrical components / electronic components which are also susceptible to nearby lightning strikes, power company power transients, switching high power equipment, solar flares, EMP, and corona discharges. Bourns 2035-30-SM-RP gas discharge tubes shipped on antistatic reel tape.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(10) SIEMENS 230-96-0 GAS DISCHARGE TUBEs (GDTs) /
ISOLATED LOOP CIRCUIT PROTECTORs /
LIGHTNING ARRESTORs / SPIKE SUPPRESSORs /
SURGE ARRESTORs / TRANSIENT SUPPRESSORs /
CORONA DISCHARGE SUPPRESSORs / SPARK ARRESTORs

New old stock (NOS) 3-lead #230-96-0 Siemens gas discharge tubes (GDTs) (Isolated Loop Circuit Protectors) / surge arrestors / lightning arrestors / spike suppressors / transient suppressors / corona discharge suppressors / electric spark suppressors. GDTs are also called surge protectors / surge suppressors, surge limiters, and transient arrestors. To quote ELECTRONIC DESIGN magazine ("Use GDTs For Surge Protection in Broadband Digital Comm," 12/11/08), "Gas discharge tubes (GDTs) have evolved to a level of providing very reliable and effective surge protection in telecommunications systems and equipment, safeguarding against lighning and power-fault conditions. Due to their robust nature and superior electrical characteristics, GDTs have already become the preferred replacement for carbon blocks in traditional telephone-service applications. Because of their ultra-low capacitance plus low insertion and return loss performance, they're also replacing solid-state semiconductor solutions in broadband-communication designs. ... GDTs protect against overvoltages caused by lightning, power switching, and fault conditions." While this typically great Electronic Design article was devoted to broadband digital communications, you should provide this same outstanding GDT protection for every piece of electronic equipment / electrical equipment you value which is connected to any power line, phone line, cable or antenna. Virtually no commercially-available transient-suppressed power strips have built-in gas discharge tube lightning arrestors although nearby lightning strikes and power system/equipment problems are major killers of computers, computer peripherals, radios, televisions and other electronic equipment and electrical equipment. These GDTs are about 1/2" long and 1/4" dia. The center lead is connected to Earth Ground, one end lead is connected to the Hot side lead and the other end lead is connected to the Neutral lead. Under normal operations, GDTs have virtually open-circuit resistance, so power insertion loss is virtually zero. When a high-voltage transient or electrical fault occurs, GDTs contain a gas which is ionized by high voltages, which switches the lightning arrestor's resistance to near short circuit to divert the high transient currents safely to Earth ground and away from your invaluable equipment circuitry.
When installed in conjunction with MOVs (we also sell), fuses / circuit breakers, and high-voltage bypass capacitors typically found in most very high quality power strips with built-in transient suppression, your protection against power line, phone line, cable and antenna line-induced electrical pulses from lightning, power company equipment failures, switching high-power equipment, solar storm solar flares, electromagnetic pulse (EMP), and corona discharges is optimized. Solar storm-caused solar flares can induce high voltage surges which can wipe out virtually all unprotected electronics over vast areas. Electromagnetic pulses result from war and terrorism - one air E-Bomb can wipe out all unprotected electronics coast-to-coast. In times of terrorism and war, your radio, TV and computer can mean the difference between life and death! Again, every piece of important electrical or electronic equipment plugged into a power outlet, power strip, phone line, cable TV or antenna line needs to be protected with GDTs no matter how else protected. Even if the connected equipment or power strip is switched off, a line pulse of only a few 1,000 volts can arc across the switch contacts to destroy the electronics. These #230-96-0 Siemens gas discharge tubes are also ideal for protecting antenna arrays, single antennas and other electrical components / electronic components which are also susceptible to nearby lightning strikes, power company power transients, switching high power equipment, solar flares, EMP, and corona discharges.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS). EPCOS MOV Varistors, S20K250, 250VAC, 350VDC, 7mm, RoHS. Our electrical power infrastructure is steadily deteriorating. The result will likely be much worse power in the near future - AC power loaded with spikes and transients. Better stock up on MOVs to protect your valuable electronic equipment by installing them into your power strips, and to replace those MOVs in them that have become blown due to past power surges.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(24) MOVs V320LA40B TRANSIENT SUPPRESSORS
for HEAVY DUTY POWER STRIPS / POWER SUPPLIES / VOLTAGE REGULATORS

New old stock (NOS). Metal Oxide Varistor (MOV) transient suppressors for power strips and power supplies (only a few of which are shown in image). Just one transient spike can wipe out an expensive piece of computer or electronic equipment! What we do is pop off the back of my 120 VAC power strip (being certain to disconnect it from 120 VAC outlet first), then connect one or two across the power busses inside the strip, then pop the cover back on. We stopped buying those commercial $30+ transient-suppressed power strips years ago; instead, we install these MOVs on standard plain vanilla $5 power strips, and save a lot of money on each. And if you've opened up these commercial $30+ power strips with transient suppression, you know that many of them use paltry MOVs with much less suppression ability compared to these robust industrial MOVs. These MOVs are about 7/8" wide and 1/8" thick. We 've seen them priced as high as $1.29 each.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(25) 1.5KE11C (1N6272C) 1500 WATTs, 11V
TRANSIENT VOLTAGE SUPPRESSORs (TVS)
BIDIRECTIONAL ZENER DIODEs

New old stock (NOS). 1.5KE11C (1N6272C) Transient Voltage Suppressors (TVS), Bidirectional Zener Diodes. 1,500 Watts, 11 Volts. These 1.5KE11C Transient Suppression TVS diodes are very useful for protecting circuits powered from 9VDC - 12VDC and 18VDC - 24VDC (2 in series) (or 9VAC - 12VAC and 18VAC - 24VAC) power supplies.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS), SMT/SMD. SMBJ5.0A 600 Watt, 5VDC Transient Suppressors. SMBJ5.0A transient suppressors shipped on antistatic reel tape.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS), SMT/SMD. SMBJ5.0A 600 Watt, 5VDC Transient Suppressors. SMBJ5.0A transient suppressors shipped on antistatic reel tape.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS), SMT/SMD. SMBJ15A 600 Watt, 15VDC Transient Suppressors. SMBJ15A transient suppressors shipped on antistatic reel tape.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(1 REEL, 653 PARTs) SMBJ24A
24V, 600W TRANSIENT SUPPRESSORS, General Semiconductor

New old stock (NOS), SMT/SMD. SMBJ24A 24-Volt Transient Suppressors, General Semiconductor.

(10) SGS BZW06P6V4B TRANSIL DIODES
6 VOLT VRM,600 WATT SURGE
BIDIRECTIONAL TRANSIENT SUPPRESSOR DIODES
ST Microelectronics

New old stock (NOS) DO-41 Transil Diodes. SGS BZW06P6V4B Transil Diodes, 6V VRM, 600W surge (5 Watt continuous), ST Microelectronics. Extremely fast response time - less than 1 ps (picosecond)! Dissipates less than 1uA below VRM. These increasingly rare but no less critical transient suppression diodes can mean the difference of you being able to operate normally or lose a costly piece of equipment to transients. We expect that electric power will become much less clean and reliable in the future. Since BZW06P6V4B diodes are bidirectional, there is no cathode band on one end typical of other diodes and rectifiers. BZW06P6V4B transil diodes shipped in reel strip as shown.

(24) MOVs V320LA40B TRANSIENT SUPPRESSORS
for HEAVY DUTY POWER STRIPS / POWER SUPPLIES / VOLTAGE REGULATORS

New old stock (NOS). MOV transient suppressors for power strips and power supplies (only a few of which are shown in image). Just one transient spike can wipe out an expensive piece of computer or electronic equipment! What we do is pop off the back of my 120 VAC power strip (being certain to disconnect it from 120 VAC outlet first), then connect one or two across the power busses inside the strip, then pop the cover back on. We stopped buying those commercial $30+ transient-suppressed power strips years ago; instead, we install these MOVs on standard plain vanilla $5 power strips, and save a lot of money on each. And if you've opened up these commercial $30+ power strips with transient suppression, you know that many of them use paltry MOVs with much less suppression ability compared to these robust industrial MOVs. These MOVs are about 7/8" wide and 1/8" thick. We 've seen them priced as high as $1.29 each.

Thermistors / Thermocouples / Heat Detectors / Temperature Detectors / Temperature Switches, Thermostats:

New old stock (NOS). Omega SMP-AP-K-125E-6 Thermocouple Assembly, 8" long. Made in USA.

OMEGA SUPER MCJ SMCJ-T
THERMOCOUPLE-TO-ANALOG CONNECTOR CONVERTER
w/ THERMOCOUPLE, ANALOG CONNECTORS & USER MANUAL

New old stock (NOS), in original box. Omega Super MCJ SMCJ-T Thermocouple-to-Analog Connector Converter Precision Instrument, with Thermocouple, Analog Connectors and User Manual. This very useful and very high quality converter converts thermocouple inputs to a linear and accurate 1mv/°F or 1mv/°C buffered analog output (you select °F or °C). The analog output can be fed into your amplifier, oscilloscope, strip-chart recorder, analog-to-digital converter for computer monitoring and analysis, etc. Thermocouple input connector can be SMP or OST-type connector. Output analog connectors are standard banana jacks. The pink tab in the back indicates that the unit is 100% new because it must be pulled out to activate this precision instrument.

OMEGA 5TC-PVC-T-24-180 THERMOCOUPLE & CABLE
180", 24 GAUGE, PVC/TEFLON INSULATION

New old stock (NOS). Omega Thermocouple and Cable, 5TC-PVC-T-24-180. 180", 24 Gauge, PVC/Teflon Insulation.

LIMITED QUANTITY. We have only a few of these of these. Two colors available as shown.

Seller listing codes: LD131, LR000-S00, LS000-R00, MM000, CC000. $39.95 each coil.

New old stock (NOS). Various Omega and ITT Thermocouples Assemblies (4 sets are shown in their original packages). These are unlabeled, so we do not know what they are or how they should be priced. These are being sold individually. Let us know which one(s) you need (please provide us the part # or model #), and if we can verify what its usual price is, we will sell it to you for at least 10% cheaper than the usual price.

Seller listing codes: LD131, LR000-S00, LS000-R00, MM000, CC000. Price is undertimed at this time.

New old stock (NOS) GE STM CL-40 NTC (negative temperature coefficient) thermistors. These are about 5.8 ohms at room temperature and go down to about 0.1 ohms when a hair blower set on "hot" is blown against it for several seconds. While these CL-40 thermistors can be used for both hot and cold applications, they are easier to use for cold temperature control in conjunction with a voltage comparator IC. Can also be used to divert or shunt initial power inrush current or surge current to ground, or for circuits which require a gradual increase in current as it warms up. About 5/8" diameter, radial leads about 1-5/8" long.

(20) B751 PTC THERMISTORS, B59751B0120A070
50 OHM @ 50蚓, 50 OHM (50蚓) to 50M (230蚓)

New old stock (NOS). B751 PTC Thermistors, B59751B0120A070 50 ohm @ 50蚓, 50 ohm (50蚓) to 50M (230蚓). B751 thermistors shipped in strips as shown.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

EPCOS PTC thermistors / current-limiting temperature sensors, positive temperature coefficient. Actual color is silver-grey. At 65 degrees F, resistance is about 40 ohm. These are great for temperature measuring and temperature switching circuits. For temperature switchers, simply wire them into a comparator IC, and have it switch when the temperature is too high, too low or within or outside your acceptable temperatures. These are also great for power buses - when a short circuit occurs, these temperature sensors heat up right away, resulting in a great increase in their resistance, which in turn limits the current. Not as fast as a fuse, but also is not likely to blow, so ideal for remote and unattended applications.

New old stock, DIP/DIL NOS, Reliability 2VA10-10 fuses. Parts provided in antistatic reel tape, tube or tray.

(100) MINISMDC050-X 0.5A (HOLD), 1.0A (TRIP)
POLYSWITCH (RESETTABLE FUSEs), Rachem/Tyco

New old stock (NOS), 1812-type SMT/SMD. MINISMDC050-X 0.5A (Hold), 1.0A (Trip) Polyswitch (Resettable Fuses), Rachem/Tyco. Over-Voltage, Over-Current, Over-Temperature Switches. MINISMDC050-X shipped on antistatic reel.

(50) BOURNES SMD075-D / SMD 075 PTC RESETTABLE FUSEs,
1.5A TRIP & 0.75A HOLD, 100A MAX TRANSIENT AMPs, 13.2V

New old stock (NOS), SMT/SMD. BOURNES SMD075-D / SMD 075 PTC Resettable Fuses, 1.5A Trip & 0.75A Hold, 100A Max Transient Amps, 13.2V. SMD075-D resettable fuses shipped on antistatic reel tape.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS). Rare 10K Ohm (10,000 Ohms), 250 Watt Gold Resistor, Dale RH-250. Comes with package of four 1/4" nuts (not shown). We also have 15K, 250W Gold Resistors (same price, we will also list upon request and in stock).

(2) MINCO KAPTON POLYIMIDE THERMOFOIL HEATERs
HK5561R37.4 L12B (HK5561 / HK 5561)

New old stock (NOS). Minco Products International Kapton Polyimide Thermofoil Heater (we also sell NTC thermistors and PTC thermistors for heater feedback control systems, see below). Part #: HK5561R37.4 L12B (HK5561 / HK 5561). Resistance = 37.4 ohms. Dia. = 1.18" (30mm). Peel-off self-sticking back.

Minco polyimide heaters are thin, flat, compact, flexible, lightweight high-quality, high-performance electronic heaters, allowing higher temperatures and thermal watt densities. Easy and fast to mount, Minco polyimide heaters should be mounted or clamped to heat sinks or other appropriate flat, smooth, dry, clean surfaces for optimum heat transfers and most uniform heat transfers. While the Minco HK5561 Polyimide Heater has a peel-off self-sticking backing for easy dry mounting, it can also be mounted with thermal bonding or with heat sink paste, or not mounted at all. Thin, flat, lightweight electronic heaters allow you to efficiently apply heat where it𠏋 needed to reduce your operating costs as wasted energy is becoming increasingly costly. Minco's etched-foil laminated heating technology provides efficient thermal transfer and cycling for increased throughput, low weight construction, space-savings, and reduced cycling times because Minco's thin, laminated polyimide construction provides uniform thermal performance for the most efficient heat transfers. These Minco Polyimide Thermofoil Heaters are resistant to most oils and chemicals, so these Minco electronic heaters can also be used to heat some non-conductive powders, oils and liquid chemicals (careful experimentation may be required).

INVALUABLE APPLICATIONS: (1) Heating of electronic components and circuits to test for and validate thermal specs, to isolate, diagnose and prevent thermal runaway, to maintain constant temperatures to negate thermal coefficient effects, etc. (2) Packaging, fusing, and splicing equipment. (3) Materials research and testing. (4) Satellites or other spacecraft to keep components warm in frigid space environments. (5) To keep vehicle motors and other engines and equipment warmer in cold environments to ease starting and to help prevent them from seizing. (6) To minimize stiction problems. (7) To keep faucets, valves and pipes from freezing. (8) Wafer processing (semiconductor wafers). (9) To stabilize critical medical diagnostic and scientific laboratory equipment (not sold as a medical device).

EVEN MORE APPLICATIONS: These Minco HK5561 polyimide heaters (and other Minco polyimide heaters) have many other possible uses. We have heard (but not tried) that they are also great for plant growth because they keep soil warm (i.e. "tropical soil"), which spurs plant growth and longer growing seasons in many plants. We also have heard that Minco polymide heaters can be placed inside clothing and powered from a battery or power supply to keep individual people warm in cold situations far more efficiently and cost effective than heating entire rooms or areas. We have also heard of Minco heaters used to help warm small terrariums where small animals, including insects and spiders, are kept (keep out of reach of animals).

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS). Large Delta Cooler / Heatsink / Heat Sink, NC-421. 3-1/2" wide. In original box.

New old stock (NOS). Sekisui Heat Sinks / Sekisui Radiators. 1-1/2" x 1-1/2" x 1/4" anodized aluminum. Slots are 1 mm wide and 3/16" deep. Peel off, self-sticking backs. Originally designed to cool PLCC ICs and CPUs, however, they have many uses. They can be placed onto just about anything for cooling. The lamps we used to help these take these images tended to overheat, we slapped on one heatsink on each lamp, which now keep them much cooler. These Sekisui heatsinks have other uses as well. For example, the slots can be used to hold thin shelving; it takes 6 of them for 1-8 shelf levels, two heat sinks on each back corner and one heat sink on each front side, then slide in the shelf or shelves, the distance between shelves can then be fine-tuned. Shelving can be horizontal or vertical. These heatsinks also have various craft uses.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

(50) THERMALLOY TO-220 /HEATSINKS / TO220 HEAT SINKS
THM-6221 TRANSISTOR HEATSINKS / RADIATORS w/ SOLDERABLE TABS

New old stock (NOS). Thermalloy Part # THM-6221 TO-220 / TO220 heatsinks / TO-220 heat sinks / transistor heatsinks / voltage regulator heatsinks / integrated circuit heatsinks / radiators. Its solderable tabs are really great! They permit not only a more solid electrical connection but also a solid mechanical anchoring plus some heat dissipation of the circuit board itself. We have also used these to provide great heatsinking for TO-3 transistors and ICs by punching a hole just slightly less than the diameter of the TO-3 part head, then pressfitting the heatsink onto the TO-3 part head. These versatile TO-220 heatsinks can also be used directly or easily modified to fit similar-looking electronic device packages, and even for discretes (e.g. power resistors), piggybacked with each other or other types of heatsinks for increased cooling, and even used on non-electronic parts type uses (e.g. we use one to cradle a soldering iron once done with soldering). The TO-220 is the most common electronic device package used for power transistors, thyristors, rectifiers, voltage regulators, ICs, etc. and is sometimes written as, "T0-220" or "T0220".

New old stock (NOS). No more cheezy, expensive and flimsy 9-volt battery clips/holders for you! These high-quality, rugged aluminum or steel industrial-grade 9 VDC battery (9V radio battery) clips/holders, while originally not designed to hold batteries but for a different use, these clips securely and snugly hold 9-volt batteries into place. We use a ton of these highly versatile 9-volt battery holders in electronic equipment we build, often to replace existing 9 VDC battery holders in commercial equipment, and for a wide variety of other holding, securing, hanging, guide, joining applications for other parts, tools, prototype boards, rods, small pipes and cabling which conveniently fit into them.

These 9-volt battery clips can mount batteries in any orientation, and adapt to all kinds of battery clip mounting constraints found in equipment: They can be mounted in any of the 3 axes, and they can hold the battery or other part either on its side or its end. There is a bottom tab in the middle of both sides of the holder, about 1/2" x 1/2" each. Either or both of these tabs can be drilled or punched for a mounting screw or pop rivet hole to mount them on the side or bottom of a project box. And either or both tabs or sides can also be bent out at 90 degrees for flat mounting on the side or bottom of a chassis. And either or both tabs or sides can be sawed off or even broken off with pliers (by bending the tabs up and down several times to induce metal fatigue). The battery clip center or ends can also be punched or drilled for mounting a pop rivet or screw to mount it without the tabs. Or the battery holder can be simply cemented into place or tied in place using tiewrap.

By squeezing in the holder/clip sides, you can considerably stiffen the grip on the battery or other part to prevent it from falling out under even rugged handling of your enclosure (we even mounted one as a test to the underside of a car and it kept the battery in place for 6 months until we removed it); and by pulling the sides slightly more apart, you can considerably loosen the grip on the battery or other part for more easy placement of it. Changing the distances between the sides also allows the clip to be used with parts of varying sizes and shapes. For thinner items, you can use wood, plastic, rubber or cardstock spacers to help secure electronic parts and other parts using these holders. And for thicker items, you can cut off or bend away one side of each of two holders, and then space the holders apart the right distance to accommodate the thicker item.

These holders are so versatile, you should keep at least several in each of your work areas. Aside from holding not only batteries but numerous other small parts, two or more can be used to securely hold, separate and/or route long items, like rods, pipes, tubing, cabling and wiring. And they can be easily used to secure adjacent flat items together in several ways. They are very versatile for many, many uses.

Battery and battery terminals (i.e. battery connectors) are not included. CAUTION: As with all items made from sheet metal, handle with care as getting cuts is always possible if you are not careful, and always of course work safely, including using gloves and protective eyewear, facewear, apron, etc.

We have seen flimsy commercial, non-versatile plastic battery holders sold in electronic stores for 5+ times what we sell these new battery holders for. Unfortunately, apparently because we sell this Item to try to save electronic enthusiasts lots of money in their purchases of battery holders or simply out of jealousy, some have shown hostility towards us for selling this Item in particular. NOTE: As with all Items we sell, this Item is sold strictly under our policies on our policies.htm webpage. If you do not fully accept any of these policies, do not buy this Item.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? See top of this webpage for big cost-savings quantity deals!

Seller listing codes:
(10) BATTERY HOLDERS: LD061, LR095-S01, LR099-S01, LS000-R00, MM000, CC000. $5.95
(25) BATTERY HOLDERS: LD061, LR095-S01, LR099-S01, LS000-R00, MM000, CC000. $12.95
(50) BATTERY HOLDERS: LD061, LR095-S01, LR099-S01, LS000-R00, MM000, CC000. $22.95 S/H: $9.90
(100) BATTERY HOLDERS: LD061, LR095-S01, LR099-S01, LS000-R00, MM000, CC000. $44.95 S/H: $13.90

(10) COIN BATTERY HOLDERS / PILL BATTERY HOLDERS /
BUTTON BATTERY HOLDERS / CELL BATTERY HOLDERS
LITHIUM 3V CR2032 BATTERY HOLDERS / CR 2032 BATTERY HOLDERS /
ACTUATOR DEVICES / SWITCHES

New old stock (NOS) black plastic coin battery holders / pill battery holders / button battery holders / cell battery holders / lithium 3V CR2032 battery holders / CR 2032 battery holders / actuators / switches. Originally designed as a coin battery holder for CR2032/BR2032/L2032/ECR2032/GPCR2032/KL2032/DL2032 coin batteries, unlike many other similar coin battery holders, this coin battery holder will easily hold other coin battery types and sizes, as well as making an ingenious actuator or switch. Left image of coin battery holder is top of battery holder and right image is the bottom showing the two easily accessible, clippable and solderable contact tabs (unlike other coin battery holders). The coin battery holder will also easily hold many capacitor types and other similarly-shaped electronic parts and other objects upto 7/8" in diameter and upto about 3/16" thick. Great for electronic designers for powering small and compact circuits. These coin battery holders also serve as great actuators / switches - especially if you need a one time switch/actuator, trip switch/actuator, alarm switch/actuator or a pin-pull switch/actuator. Unlike many similar coin battery holders, the top of these coin battery holders has 5 castle-like notches - one directly in front of contact opening - where a small piece of non-conductive wood, plastic or cardstock (e.g. popsicle stick piece) can be placed between the battery holder contacts to keep them apart and open-circuit using this top notch as the guide, and then pulled out to short the contacts together to trigger or shut off an electronic function. For examples, the battery holder could be used as a safety alarm or shut-off switch when someone removes the cover from your electronic box, or as pin-pull personal alarm system or trip alarm system - you pull the nonconductive "pin" between the actuator contacts to activate an alarm the attacker can't easily switch off or bypass or replace the pulled tab. Or as a threshhold switch to protect home, business and car doors and windows. Or to protect valuables, such as equipment, tools, collectibles, etc. - no complex alarm system is required. These pill battery holders are also great for charging and testing coin batteries - slip in the coin battery, then easily and securely charge or test it using its contact tabs.

New old stock (NOS). 3-AA Battery Holders, with leads. These can be mounted back-to-back or side-by-side to make 6-cell holders for 9VDC applications.

DO YOU WANT THIS SAME ITEM IN A GREATER QUANTITY AND AT CHEAPER PER-UNIT PRICE AND PER-UNIT S/H COSTS THAN THIS ITEM? SEE DETAILS AT TOP OF THIS WEBPAGE.

New old stock (NOS), in original box. SOLA SDP2-24-100T, EGS, 24VDC, 2.1A Power Supply w/ User Manual. 115VAC / 230VAC input voltage. 3" x 3-3/4" x 1-3/4".

Used and in great condition. Dranetz Series 808 Power/Demand Analyzer. Power consumption and energy conservation / energy efficiency are become increasingly critical. This Dranetz Series 808 power analyzer includes the meter analyzer itself, plus the very strong, latchable, padded Case, plus three Isolated C.T. Termination modules, plus three AEMC Meter Clamp-On Power modules (600V), plus power cord and cabling, plus extra rolls, plus "User's Guide for Series 808 Electric Power/Demand Analyzer" manual. While we can't be certain, this Dranetz Series 808 assemblage appears to be complete with everything and it is fully functional. Even if you can't use the Dranetz Series 808 instrument, the case itself is great for storing instrumentation, such as oscilloscopes, spectrum analyzers, signal generators, electronic meters, power supplies, etc., as well as hunting equipment and precision power tools.

Seller listing codes: LD116, LR000-S00, LS000-R00, MM000, CC000. $1995.95, S/H: 45 lbs ship weight, $12 handling. Shipping address must be U.S.

Used and works great. Acopian DB12-15 AC-to-DC Power Module, regulated voltage power supply.

(2) TYCO ELECTRONICS DC-DC CONVERTER PC BOARDS,
36-75 VDC INPUT, 5 VDC OUTPUT,
SW003A0A94, 4300-024, FLJSV110504-03

Used and in great condition Tyco DC-to-DC converter PC boards, 36-75 VDC input, 5 VDC output. 04KZ63031776, SW003A0A94, FLJSV110504-03. Made in 2006. Also made by Augat, Amp, Alco, THBE.

HIGH-TECH EXPERIENCED PROFESSIONALISM: Many "high-tech business" owners and their employees today are clearly woefully ignorant of the high technologies they sell (including some giant electronic parts houses!). ABQ-Techzonics of Albuquerque, NM, USA, is owned by John J. Williams, M.S.E.E. Mr. Williams is a former Senior Electronics Design Engineer (Lockheed EMSCO); Professor of Computer Science (New Mexico State University (NMSU)); Electronics Weapons Design Engineer (U.S. Navy, U.S. Air Force); Health Physicist (National Institutes of Health (NIH)), etc. Williams is also currently President of Lone Star Consulting, Inc. and CEO of Consumertronics.net. While we don't know everything about everything tech (no one does), we have a high level of expertise. We sell a lot of electronic components / electrical components. Most of these electronic components / electrical components are small electronic parts / electrical parts, such as integrated circuits, optical devices, transistors, rectifiers, diodes, transformers, inductors, capacitors, resistors, displays, switches, relays, crystals, oscillators, transducers, sensors, prototyping, connectors, fuses, wire/cable, power components, etc., as well as some larger electronic parts / electrical parts and electronic test equipment, scientific equipment and industrial equipment / parts, electrical equipment / electronic equipment in general, tools, mounting hardware parts, and special materials. And we also buy and trade these types of items (Trade & Buy Offers). And unlike most electrical / electronic components sellers, many of the electrical / electronic component, etc. lots we buy we set aside some of the electrical / electronic parts, etc. for our own electronic projects and research. We sell those electrical / electronic parts, etc. we don't use. Our suppliers know that if their electrical / electronic parts, electronic test equipment, etc. aren't excellent, good chance we will discover it and they'll hear about it!

ABQ-TECHZONICS (Albuquerque, NM) SELLS, BUYS & TRADES: ELECTRONIC COMPONENTS, ELECTRONIC PARTS, ELECTRICAL COMPONENTS: Integrated Circuits (ICs), Transistors, Diodes, Rectifiers, LEDs, Capacitors, Resistors, Potentiometers (Pots), Varistors, Inductors, Coils, Transformers, Speakers, Relays, Switches, Actuators, Fuses, Circuit Breakers, Thermistors, Crystals, Oscillators, Sensors, Transducers, Optoelectronics, Prototyping, Connectors, Headers, Sockets, Pins, Wires, Cables, Displays, Photo, Video, Laser, RF, Microwave, Electronic Modules, Power Adapters, Power Supplies, other Electronic Parts / Electronic Components / Electronic Subassemblies / Electronic Assemblies. EQUIPMENT, DEVICES: Electronic Test Equipment, Electrical Equipment, Computers, Peripherals, Electric Tools, Hand Tools, Mechanics Tools, Precision Tools, Tool Chests. MORE TECH STUFF: Commercial/Industrial/Scientific/Laboratory Valves, Fittings, Hardware Parts, Mechanical Parts, Supplies, Special Materials, Security, Survival, Radionics, Crafts, Hobbies, Strange & Unusual, Religious & Spiritual, Books, Manuals, Software, Collectibles.

SOURCES OF ITEMS ABQ-TECHZONICS SELLS: Surplus, online auctions, hamfests, private sales, business moving sales, overstocks, job lots, wholesale lots, estate sales, garage sales, thrift shops, charity auctions, flea markets, hardware trades, abandoned storage, lost & found property sales, discontinued items, obsolete items, warehouse inventory updates, excess inventories, liquidations, business closures and out-of-business sales, foreclosure sales, bankruptcies, government auctions / government sales, new salvage sales, and other sources for integrated circuits (ICs), electronic parts / electronic components, hardware, special materials, etc., Albuquerque, NM area preferred but will buy from anywhere. ABQ-Techzonics is both a wholesale sellers/wholesale traders/wholesale buyers and retail sellers/retail traders/retail buyers, largely depending on quantity.

NOTE: By policy, we never recommend for or against, approve or disapprove, sponsor, endorse, support, guarantee, or take any responsibility for any of the content of any non-Consumertronics webpage, website, advertisement, publication or other statement EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. And by policy, we never recommend for or against, approve or disapprove, sponsor, endorse, support, guarantee, or assume any liability or any other responsibility for any non-Consumertronics company, product or service EVEN IF WE HAVE PROVIDED A HOTLINK TO IT and EVEN IF WE HAVE DISCUSSED IT OR INFORMED YOU ABOUT IT on a webpage, or by phone, email, mail or fax, or by any other means of communications. For more information on our policies, please refer to our policies.htm webpage.
Test Source Links only (no visitor use): Source-1, Source-2, Source-3, Source-4, Source-5, Source-6, Source-7, Source-8, Source-9, Source-10, Source-11

by Consumertronics.net Order Form (MAIL/EMAIL) Or write down order on paper, add it up + S/H, Mail/Email (PDF or TXT attach) to us. Check, Money Order, PayPal (wizguru@consumertronics.net), Western Union, Moneygram, Trade => 2010 CATALOG Webpages now on CDROM or Disk (only $8)	ABQ-Techzonics Albuquerque, NM Sitemap	Contact Us: wizguru ...tell your friends! policies.htm
USA site - No cookies - No spyware - No adware - No trojans - No viruses - No worms - No spam - No pop-ups